Reverse Light Switch - Peugeot 206

Replacing the reverse light switch in a Peugeot 206 from years 2002 to 2009. If your reverse light doesn’t work and you’ve changed the bulbs and checked all the connections and it still isn’t working, it’s possible that this switch may be faulty. The switch type is Bitron MA-100 225753 and costs about €20 euros, but there are other compatible switches that will fit this car. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Reverse Light Switch ~ amzn.to/3OraIMm
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2021
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@screwsnutsandbolts]

Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘Thanks’ button below each of my videos. Your support would be really appreciated, thank you ! 👍 Screwsnutsandbolts

[@hectorherbert6585]

Thanks for the tip.!!.I would add that whenever I do such work on my 206 SW ,I use the chance of easy access to check & clean up a bit ,grease & de-grease some parts ,and a quick anti rust spray on those battery trays before re-installing..just did the transmission oil change on mine so took the battery off for oil refiller access..

[@johnpettiford4861]

Good portrayal of how to do it in SOHC engine. I have a DOHC engine and it is a bit different

[@Martyn_Wolf]

For my Peugeot 206. The nut I need to remove is on the underside of the batter tray on the left hand side with a long rod sticking out of it (that requires a 7mm socket to place over it - that I already have. It's getting to the underside that's a pain)

[@TheBestDarkSide]

Thanks for the tutorial! I have a problem with my 206: sometimes while I'm driving and I change gear (for example I engage 4th or 2nd) the rear light comes on for a few seconds. I noticed this because I set the radio to mute when it detects reverse gear. Could it be a faulty bulb or could it be another problem?

[@PashaKianersi]

Thaks for understandable tutorial, but it’s not necessary to open tray

[@screwsnutsandbolts]

You're welcome. It can probably be done without removing the tray but it is harder to demonstrate clearly.

[@fabiettokungarage1822]

Now I'm understand!! Thank you!👍

[@screwsnutsandbolts]

You're welcome 😊

[@onurokur5772]

Hello, I wonder if the car in this video is a Peugout 206 automatic transmission

[@abdelhakguettaf4241]

goob job thanks...

[@screwsnutsandbolts]

Thanks for watching !

[@hasanainmohammadismael4540]

Hello, do you mean changing the reverse light, you mean when going back when you put R?? thank you

[@screwsnutsandbolts]

Yes. The switch that activates the white light at the rear of the car as you drive backwards

[@hasanainmohammadismael4540]

@@screwsnutsandbolts Thank you for your good and useful market and commercial information. Keep it up and don't stop. Hey Rose

[@anthonyrusses6285]

Great job 👌 wiring diagram please

[@screwsnutsandbolts]

Thanks, I don't have the wiring diagram, sorry

[@marioargentinorivas6924]

Hola Para Citroen C4 sedan exclusive bva 2.0 16v, es igual? Saludos

[@screwsnutsandbolts]

Automatic or manual transmission ?

[@marioargentinorivas6924]

Es automatica la transmisión

[@screwsnutsandbolts]

The transmission in the video is manual. I think it's different on an automatic transmission

[@car4ndpower109]

I do that job for 1-min replacing switch

[@onurokur5772]

Hello, I wonder if the car in this video is a Peugout 206 automatic transmission

[@screwsnutsandbolts]

No it's a manual transmission