RC Glider "BONE GIRL" building video PART 1 WING- Balsa rib wing construction 3d printed rc plane

RC Electric Glider "BONE GIRL"
Part 1-wing
Drawings:
grabcad.com/library/rc-electr...
Rib construction wing,
from start to finish,
step by step
Material: balsa, plywood
CNC laser cutting
Wingspan 2400mm
#rcairplane #rcGlider #rcplane
RC World of Model - Facebook Group
/ 453983092600613
Covering film
Yellow
hobbyking.com/pt_pt/covering-...
Black
hobbyking.com/pt_pt/covering-...
Servo 4x
hobbyking.com/en_us/turnigytm...
Thank you for watching.
SUBSCRIBE
COMMENT
LIKE
ROOLAID
/ roolaid
grabcad.com/marko.roolaid-1
Радиоуправляемый электрический планер "BONE GIRL"
Часть 1-крыло
Крыло конструкции нервюры,
от начала до конца,
шаг за шагом
Материал: бальза, фанера
Лазерная резка с ЧПУ
Размах крыла 2400мм
RC планер Build
2M 2M
RC Glider F5J Здание
Покровная пленка
Желтый
hobbyking.com/pt_pt/covering-...
Черный
hobbyking.com/pt_pt/covering-...
Сервопривод 4x
hobbyking.com/en_us/turnigytm...
Спасибо за просмотр.
ПОДПИСЫВАТЬСЯ
КОММЕНТАРИЙ
НРАВИТЬСЯ
ROOLAID
/ roolaid
grabcad.com/marko.roolaid-1
Radioupravlyayemyy elektricheskiy planer "BONE GIRL"
Chast' 1-krylo
Krylo konstruktsii nervyury,
ot nachala do kontsa,
shag za shagom
Material: bal'za, fanera
Lazernaya rezka s CHPU
Razmakh kryla 2400mm
RC planer Build
2M 2M
RC Glider F5J Zdaniye
Pokrovnaya plenka
Zheltyy
hobbyking.com/pt_pt/covering-...
Chernyy
hobbyking.com/pt_pt/covering-...
Servoprivod 4x
hobbyking.com/en_us/turnigytm...
Spasibo za prosmotr.
PODPISYVAT'SYA
KOMMENTARIY
NRAVIT'SYA
ROOLAID
/ roolaid
grabcad.com/marko.roolaid-1

[@Doggeslife]

Looking really pretty. I haven't build a thermal glider since my 99" span Oly II in the 1980s. I bought a new interior door and set it on saw horses in my bedroom as a build table. ;-) Happy flying!

[@Hangar11RC]

You are incredibly talented and have awesome tools and equipment. I will get there one day my friend. Keep up the great work and thanks for inspiring others to create. One of my favorite feelings in the world is creating my own R/C aircraft and making it fly!!!!!

[@ranashome24]

Reminds me of my building the Olympic 100 glider in the 1980s in India It had beautiful carved solid balsa anti vortex wingtips. It was scratch built from the plans. Great memories !

[@WildBillFlysRC]

Impressive building skills! I'll be following along for sure!

[@coroneldonat]

Veeery good work, Marko! How good you handle your tools, as well! Superb.

[@THROTTLEPOWER]

Very cool !!!!!!!!!!!!

[@demenrc7715]

Hi Golden hand..😁👍 you made it with patience and with all your heart. This will be a very beautiful plane.

[@flightdirection8122]

Wow that’s nice some day I want to build one👍🏻👍🏻👍🏻

[@lucianobozzola8077]

Complimenti Marko se BRAVISSIMO . Mi piacerebbe tanto costruire questo aliante

[@markoroolaid]

Sarebbe un grande piacere per me. Non c'è niente di complicato qui, devi solo iniziare la costruzione

[@globalwings7539]

Good working

[@EMTAx]

Thank you for not using the stupid youtube music for a change👍 What kind a parfume are you using at 18:00

[@kev4354]

Fantastic building skills

[@markoroolaid]

Thank you

[@BurblyWurbly]

You build fast.

[@ahmettanercantimur4862]

Hello dear Marko, first of all I want to express my endless thanks for the amazing posts you have made. I wonder what are the dimensions of the materials such as Balsa and plywood in the DXF files we use while making this plane, in terms of thickness. Thanks in advance.

[@markoroolaid]

Hello In the construction of the plane I have used balsa trees 100x1000x2mm- 7 sheets, 5mm 3 sheets. A little thicker balsa, for making a plane nose. Plywood takes some A4 size. The plywood was 4mm thick.

[@ahmettanercantimur4862]

@@markoroolaid Thanks Marko...

[@globalwings7539]

Liking a good

[@ChristieNel]

This is what they mean by "ARTF 34 minute build time".

[@user-ox4zi6gq6f]

отличная работа, очень приятно смотреть за работой профи! смотрел на одном дыхании. Марко,у тебя как у профи сколько времени уходит на постройку такого крыла?

[@markoroolaid]

Около 3 дней

[@user-ox4zi6gq6f]

@@markoroolaid спасибо,у меня наверное неделя ушла как минимум.

[@user-on8xh6qb1i]

How to calculate how many ribs are required for wing

[@markoroolaid]

I usually make the distance between the ribs 40-50mm

[@roberthanson9843]

What is the power level of the laser you are capable thing with? Is it of Chinese origin? Thank YOU Seeing lots of good ideas in your videos! Great Job

[@markoroolaid]

yes ,Chinese CNC co2 laser, 130w.

[@gsp825]

let me know please about lenght of wing spar. let describe a single half of wing, right or left. it contains the main part and the tip part. but there are two separated spar in each of part,and they are not joined with each other. main and tip part only join by ribs. did i understand it rightly ?

[@markoroolaid]

Look at the drawing, I don't remember anymore

[@cesareduardoalbarracin4965]

HoLa marko quisiera los planos de corte de este modelo

[@matttroy7632]

Do you use tape for hinge ate the ailerons? may be the video its too fast but cannot see you sanding out to make espace for the up and down movement!

[@markoroolaid]

yess, I used tape hinge

[@mattchopper]

@@markoroolaid Appreciate your return, keep that great job!

[@michaelbastantabarus3860]

What kind of plastics that you use for the wing?

[@markoroolaid]

Hi Michael. I used Hobbyking covering film. hobbyking.com/en_us/workbench/hardware/covering-film.html

[@BillyG869]

Where can I get the plans for this model? Or better yet, the laser precut parts…

[@markoroolaid]

Hi, Bill. Drawings link grabcad.com/library/rc-electric-glider-bone-girl-rc-airplane-glider-1

[@MelLocklear]

What is the stuff in the spray bottle?

[@markoroolaid]

Accelerator hobbyking.com/en_us/insta-set-ca-accelerator-8-oz.html?wrh_pdp=7

[@firmankrisnadi7248]

Highly appreciate if you could provide the link of the plan

[@markoroolaid]

www.thingiverse.com/thing:4665889

[@gianfrusaglia85]

Hi,can i send you my glider project?

[@gianfrusaglia85]

I have a draft project

[@jimmarburger611]

Nice model, I remember when most models were balsa. Built many of them in my day. I love that you showed the entire build, but I'm confused by to what end. Is this a how to, because the time lapse makes that impossible. If it's just a video on you building the model then it's too long, way too much content for a "Look what I did". In your title you say 3d printed, but obviously it's not. You have to do some digging to discover that the only thing 3d printed is a camera mount. Also, I'm with @David Davids, wood glue is never a good option. It's: 1. Slow - Who wants to wait 24hrs for a joint to harden 2. Heavy - Extra weight is never a good thing in a model Rc plane, specially Sailplanes. It increases wing loading which means stall speeds rise, lift decreases, etc... 3. Glue joints are vulnerable to humidity. Add a little humidity, add the covering and put in the sun for a bit and see what happens. CA glues are great, I recommend getting a thick and a thin version. The accelerator, which I see you had and at least 2 different epoxy glues. I'd recommend a fast setting (Like 10 Min) for those quick jobs and a slow set (Like 24hr) for the jobs that strength is critical. Also get some microballons (Micro sized glass air filled beads so small it looks like powder). When weight is critical, like the tail of an aircraft and you intend on using an epoxy the microballons are mixed with the epoxy to make it much lighter. Don't get me wrong, I have the utmost respect for what you are doing here, I love RC models, specially Sailplanes and that model seems interesting and I've considered getting a set of plans for my own use. The use of balsa has declined and the best practices of building with it have faded. Anyways, keep up the content. Have a good one.

[@markoroolaid]

Thank you for your opinion. I will take that into account and appreciate it

[@user-oo1pu6bj1c]

Планер реально устаревший какой хоть профиль на нем?

[@daviddavids2884]

at 3:36, glue is WHAT type? should not be water-based. that is one weird dam way to make a wing. cheers

[@markoroolaid]

Hello. This is a common water-based PVA wood glue.

[@daviddavids2884]

@@markoroolaid well, then, it is a POOR choice.!!!! in part, because components cannot really be CLAMPED. also, balsa is VERY porous. wood cement will Fully cure, in 24 hours. NOT so, water-based glue. especially, after it is ENCLOSED in the covering. googletranslate

[@williamhoenstine5057]

Way too fast. Can't comprehend what you're trying to convey!

[@markoroolaid]

Unfortunately, this KZbin stuff is like that. Doing too slow- boring. Making too fast - the video is too superficial. Too bad if you missed something, but you can always ask me. Thank you for your opinion. I take that into account