Vertical lines on Samsung LED TV

[@fishywtf]

Just did this, and it worked! Took a while for me to locate the area where it needed to be raised. I ordered a T-Con board because ShopJimmy said that was the cause of vertical lines and their crap didn't work, it made my picture worse with colorful dots; so I put back my old T-Con board and did this, it's working great so far! Thank you so much!

[@massoudmakes]

You are welcome. I am happy that it helped you.

[@UGotHookah]

fishywtf vertical lines like this actually is the t con board. If you follow Tampa tech he's a KZbinr on here that always talks about vertical lines and fixes tvs I trust him. But if another method works that's great maybe the t-con board you got was garbage but I've never tried it in the oven I'd be scared but everyone saying it worse so

[@jamilamameri2457]

Ok

[@jasonbaker4475]

It is a short in either the cable in between the tcon board and main board or where it connects to the main board or tcon board. Changed 2 boards with same problem.

[@hanspecans]

Solved my problem as well! Ordered a t-con for no reason! Should perhaps order a new main board since this fix is most likely temporary and just patching a broken solder point.

[@GeorgeGeorge-xj2bc]

The problem is in the soldering balls of some bga chip and bending slightly the pcb the cracked join fixes,but needs a real reflow until all the solder balls underneath bga chip melt and form new connections.

[@sebulbator]

Dude! T H A N K S !!!! You saved my life! And probably the TV's (samsung UE46C5600UWXXH) too, cause my solution was a precise smack to the back of the TV(which worked, too).. Got a bit drunk to get the courage and fixed it. You are the man!

[@massoudmakes]

You are very welcome, I am happy that it helped you and thanks for watching.

[@jethronh]

so what did you do at 1:16?? you put the screw back BEHIND the board? and then relieved tension by backing off the screw on the board?

[@massoudmakes]

Yes the screw is behind the board and by undoing it I managed to bend that corner just enough away from TV body to get the perfect picture.

[@MarcVanschoonbeek]

Hi massoud147. I had exactly the same problem as you with a 5,5 years old UE40C6000. I went to a repair center and they would fix it for 550€ (almost the price of a new set). So I searched the internet for a replacement of the mainboard and I found - and tried - this video. And your solution works now for a week PERFECTLY. Many thanks for taking the time to produce the video :-) - It saved me perhaps the cost of a replacement board +-130€ I will report in the future if the "bended" plate keeps going well or if it may have caused other issues. If you do not hear me the first 3 months ... you may take it as good news.

[@massoudmakes]

+Marc Vanschoonbeek I am glad it helped you. Thanks for watching and your comment.

[@meryemqas4042]

Lgsfgcyd per l'inconveniente è rimasto per l'inconveniente e vi invitiamo a non copiarla a non copiarla a non copiarla a non copiarla

[@ryancox24]

Did you put a screw back in the very top left?

[@massoudmakes]

No, I left that on out so that the screw below it could push the board away from screen.

[@williamcahoon1438]

I also had several vertical lines in a Samsung TV Just doing a complete setup of the TV - like when it was first put in operation solved the problem. Part of the set up is to have the TV re-scan for channels . Resulted in no more vertical lines. No dissemble of TV was needed.

[@tainchains]

What can i do for green an white vertical lines. I replaced the tcon because I had no pic. now I have pic and i also have green and white vertical lines. Is the new tcon board also partially bad? its used

[@massoudmakes]

Sorry I don't know as I'm no expert.

[@Amber57499]

Good people, you can also remove the mainboard carefully (especially the cable with the thin wires) and put it in your oven. 110° celsius 30 minutes. That fixed mine!

[@Humane_resource]

is this legit or are you just being a troll?

[@Karijahlion]

Legit, its the GPU.

[@saywhat5392]

This is legit. The oven will reflow the ball grid array (BGA) on the GPU. Those are the black square parts. BGA's are notorious for having intermittant contacts.

[@ggalfredson]

Oh and maybe the solder joints around that grounding screw....that is most likely the real failure but unless you have the replacement identifying is %99 of the task until you get one. I own all of them and plan on finding mine and this is very helpful

[@laadipumi7515]

What may be the cause?

[@hugogarcia292]

i have 55 smart led samsung but with horizontal lines will this work the same with it.

[@catcraze8673]

Exactly, the lines spoil the fun of me watching things.

[@augustosilva33]

solda solta ao envergar a placa a solda encosta, o certo seria da calor a placa com fluxo de solda..esse serviço ai é um improviso

[@erivas5539]

Verdade.

[@CrowdPleeza]

I have three old TVs. They're from the late 80's to early 90's. One has a bad picture as far as color. Another shows a flat,squeezed looking picture. The third TV's power doesn't work. It may need a fuse. Anyway, I'm considering throwing them away instead of getting them fixed. My question is do any of these old TVs have any valuable replacement parts inside them that would sell on ebay?

[@massoudmakes]

Sorry, I have no Idea. I am not an expert in TV's or electronics.

[@xaviercalafell1993]

I had exactly the same problem and this solution inmediately solved the problem. Thank you very much for posting.

[@massoudmakes]

You are welcome and thanks for watching.

[@antoniocarnevale3230]

Very good job/idea! But, i don't think is the board for herself, maybe is the ribbon cable the problem??? Anyway, is that the tcon?

[@massoudmakes]

+vaccaro luisa I don't know what the board is called.

[@UGotHookah]

Antonio Carnevale the board that's the t-con has like 6 cables connected to it like three on each side very thin and I believe they're brown cables at the top somewhere it should say t con on it.

[@kiiikoooPT]

no that isn't, that is the mainboard, and this tv has no tcon board i believe, everyone keeps saying replace tcon board in multiple videos, but this tv doesnt have one, i think at least i kind find it in my tv, and i have the exact same problem as this one on the video, but this didnt help me at all either :)

[@allen0088]

do you have two screws in the same hole? how is one screw behind the board and in front too?

[@massoudmakes]

There is just one screw and it is on the TV body behind the board. The screw driver goes through the board to adjust the screw which is behind it.

[@DavidNitzscheBell]

so, what do you think was the problem? The T-Con board was connected too tight? Or what?

[@massoudmakes]

I assume some broken connection somewhere on the board, I never found out.

[@razcann3597]

So is the cause of the problem a faulty board or bad contacts with the board & screws

[@massoudmakes]

I am no expert but I think it is a broken connection somewhere on the board, just don't know where. There is no problem with the screws.

[@zulubrit3560]

Which board is it?? T-con, powerboard??

[@massoudmakes]

I don't know what it's called, sorry.

[@ns5337]

It's called a main board. Open up the back and there should be a part number on it.

[@robmino4419]

I just started getting a few vertical lines and one being blue on the left hand side of my Samsung #UN55ES7500FXZA. I wonder if this will work for this model.

[@daury44]

i have a Samsung UN55D8000 and after 3 or 5 minutes appears a vertical line on one side of the screen this will fit the problem? the vertical line is not dark turns to different color depends on picture

[@massoudmakes]

I am not an expert, I tried this on mine and it worked.

[@UGotHookah]

massoud147 he probably has a t-con board issue vertical lines are definitely a t-con board is she or a cable issue or in your case just pushing the board in cuz it was loose

[@UGotHookah]

Daury Hernandez y con board issue most likely or could be a cable issue or could be the the board is loose

[@andresgrb]

I have the same problem in the same Samsung UN55D8000. did this help? or what you do to fix your problem?

[@andresgrb]

Buenas tengo el mismo problema en el mismo televisor Samsun UN55D8000. Lograste resolverlo? Si lo resolviste podrias decirme como lo lograste?

[@markmiller2306]

hi there ive got panasonic 40cs520b smart tv but mine is width and length lines like yourrs could it be this or some think else thank you for video mark

[@massoudmakes]

I am not sure if this works on all TV's, it worked on mine. Thanks for watching.

[@markmiller2306]

thanks for getting back 2 me

[@thinrope]

Big thanks, had exactly the same problem (every 5th vertical line is random) and fiddling with the top two screws as showed works for me! Ground loops or intermittent ground and/or RFI from the power board? Will try to investigate further...

[@massoudmakes]

You are welcome, thanks for watching.

[@captainprototype187]

This is crazy, you have to be sooo lucky to find that fix!

[@TheMolokoid]

solved my problem (cleaning the connection heads didn't work). instead of putting the screw under the board, we loosened the screw and then wrapped a cable tie under that particular screw.

[@enkig2624]

Does it still work? I've tried this and it works temporarily. If you knocked the TV the lines reappear

[@MystiqEevee]

I have a Emerson 42 inch with a weird issue whenever I smack it in a very specific spot or apply pressure in that spot lines that are like black and dotted appear on the right hand side of screen I managed to temporarily fix it just now but if I were to jiggle the t.v. enough it would probably screw it up again I am not sure if it's a lcd or led but any help would be appreciated my mom refuses to get rid of it and it drives me crazy having the stupid lines on it

[@massoudmakes]

As I'm not an expert I cannot help you, sorry. With my TV, I noticed that the problem was some sort of loose connection on the board and by slightly bending it I managed to restore the connection and got rid of the lines. This is not the best solution but for me it worked. The proper way is to find the exact fault and then do the repair which might involve replacing the faulty board.

[@divierteknia]

similar problem, but unfortunately the 'screw' fix do not work for me. i suppose i have a very bad bga contact issue. i will try to burn a little the chip with my hot aire gun... i will see if results in something positive

[@danring1340]

What about Samsung model no: UA43K5500AGXXP..I detached the back no screws inside also. Can you help, please..Dan

[@massoudmakes]

I don't know if this works on all TV's. I tried this on my TV and it worked(to some extent). As I am not an expert I can't help, sorry.

[@danring1340]

@@massoudmakes I understand, there are some oddball cures one of which is nonsense, at least yours has a bit of logic to it..stay safe. Thanks for the reply

[@skorpion8051]

Hi, I have a question about this Samsung, I have a problem, the diode is flashing, the diode is heard chirping on the back of the TV, it does not respond to the remote control, the problem is that I pressed two buttons and the image is silent or sound, you can hear it chirping, what can it be Regards

[@massoudmakes]

I don't know, sorry. I am not an expert, I just did a DIY job on my TV and it worked.

[@skorpion8051]

@@massoudmakes ok

[@brijkansal]

My LED 32 inch TV is showing white vertical lines on the left side of screen just above menu.approx 5 inch wide and 5 inch from left edge. On rest of screen picture and sound are ok. can you advise. Should I try my self?

[@massoudmakes]

+brij kishore Kansal Sorry I cannot advise as I am not an expert, I managed to do this fix with trial and error. It all depends on what is causing the problem.

[@koendrilamisrapamela9103]

My one and half year LED 4K 55inch UHD TV shows only one vertical thin line(which is not visualize when we see from far distance) to the right most side, it has been seen for two months, feel very irritating, but the overall picture quality is very good. Can I follow this tricks, or any other way out?

[@massoudmakes]

It all depends on what is causing the problem and as I am not an expert I cannot help you, sorry. I did this on my tv and it worked even though it is not really a proper solution. Your tv is a lot newer and it could be different .

[@soosaisteven3984]

Your problem may just started.. Will get worst as time goes.... Shitty scumcum TV.

[@divierteknia1918]

The tested problem is cold joints of SDP91 chip (top left upper one, it is under the heatsink). I have 2 boards with the same problem. pressing the chip, lines dissapear. I have tried to oven one board, with no luck, the problem still present. Las weekend. i reflow the sdp91 chip , and total fail. No operation anyymore. The other one the same, but i get the chip out.... Because i have no tools to reball my current chip, I' am going to purchase a new sdp91 (ball installed) chip from aliexpress, and try to solder it with my heat gun and some compatible flux....

[@massoudmakes]

It sounds complicated, I don't know how to do that. Good luck anyway, hope it works.

[@ntstudio28]

Had the same problem! And literally opened the tv back and pushed on all of the connectors to make sure they were firm and that did it for me :)

[@massoudmakes]

That was lucky, I tried that first but made no difference then I noticed it was a bigger job.

[@Trid3nt861]

Its the T-con board with the ribbon cables. Or maybe its the flex cables connected to the lcd themselves

[@massoudmakes]

I am sure it is the board as it only works when I lift the corner of the board without moving any cables or ribbons.

[@Trid3nt861]

massoud147 I actually fixed my vizio 50 inch smart tv. Had the same problem, first vertical lines, then half the screen had blue and the other was clear. I just changed the ribbon cable area to opposite sides and then reseated and it fixed the issue. No more annoying green/red vertical line madness. Saved me 400 plus tax in tech repairs. Thank goodness for people on youtube.

[@hectorhernandez7389]

Would this be applicable to a Samsung qled tv as well? I’m looking to maybe try this out!

[@massoudmakes]

I don't know, I am not an expert, sorry.

[@Trash_Night]

how long could this fix your tv? when had you the problem again?#

[@massoudmakes]

The fix lasted for about two years but now sometimes when I first turn the TV on I get lines for a few seconds and then they go away when TV gets warm.

[@romeomomo7991]

hi my tv has both horizontal and vertical lines, do I apply the same method to fix it?

[@massoudmakes]

+Romeo momo It all depends on what is causing the problem. I am not an expert and as I explained in the video I managed to find a solution (not permanent) to the problem by trial.

[@corratecxverts01]

can this fix horisontal lines as well?

[@massoudmakes]

I don't know, sorry. My tv only displayed vertical lines and later on some random patches and both of them went away with my fix.

[@tune2john]

Did you finally get to change the board? Or is the fix still working good for you?

[@massoudmakes]

I could not find a new board and now sometimes I get the lines again so I bought a new TV.

[@themanthemyththelegend1392]

@@massoudmakes Told ya!

[@radevucetic7775]

Hvala na pomoci i Veliki pozdrav😀!

[@massoudmakes]

You are welcome.

[@jonathanmarinay4989]

you did only a temporary fix..you did not find the exact problem..its clear that its having a lose connection on tcon board..anyways..you fixed it..good job bro...

[@massoudmakes]

Yes you're right but I couldn't find the exact location of the problem so I tried this and it worked. thanks for watching.

[@stellavr57]

375/5000 I had the same problem, consulting various forums, he says all the same problem, soldering chipset welding dry, in fact there is no component that skips enough to create this kind of problem, in fact the problem comes from tablecloth connector that goes to the screen, simply unplug the motherboard put contact spray and it works immediately!

[@itsmekhantaj]

My Samsung led smart TV is showing solid black and thin multi coloured lines that disappeared using this method but came back after 6 hours. Now this method is not working on my tv. Please help.

[@massoudmakes]

This is a DIY method that worked for me. Not all TV are the same and different reason might be causing this problem. As I am not an expert I cannot help you, sorry.

[@JacobLRusso]

Thank you! This worked for my Samsung. For my TV, the connection was faulty in the bottom right corner.

[@massoudmakes]

You are welcome, I am glad it worked for you.

[@williamheckman4597]

So hows it working now ? 6 months out ? Any troubles ?

[@massoudmakes]

William Heckman A few weeks ago I started getting green patches only in black area of the picture.I took it off the wall and then the picture was perfect so it seems that the stress on the mounting frame is moving the board slightly and causing this. The green patches do go away after a while but it is annoying so I think I might have to go back and put on it's stand.

[@MustafaMamajiwala585]

Sir, I need your help. I am from India. I am having Samsung f5500 plasma 51". I am having a vertical line for years, now suddenly there are horizon (light black dotted) lines. How to solve. Can't trust a local repair person

[@massoudmakes]

I found this solution by trial, as I am not an expert in TV repair I cannot help you, sorry.

[@MustafaMamajiwala585]

@@massoudmakes okay

[@ralamothe318]

Does anyone know what this board is called technically? I'm having the same issue on my Samsung UN46D6000SF and wanted to buy the part online. Thanks!

[@massoudmakes]

I tried to find it online but no luck.

[@OrderOfTheRedstone]

its called the t-con board (timing and control board)

[@Highphi420]

i have bought 3 tcon boards brand new ALL have the same issue. this fix is temporary as the fault will come back after used for a few months. use the time to save for a new TV. NOT a Samsung this problem is across the board of models and sizes. (no pun intended) Since this usually does not happen until after 2 year warranty is expired Samsung has no plans to change the process.

[@pilikiosuafoa1727]

I have the same kind of tv with the same problem, going to try it out. DId you ever solve the issue?

[@ViteshSingh]

@@Highphi420 You had three as in went through 3 boards?

[@sargeghost151]

idk if you know how to help me but when I play a video for example nba 2k16 on my 2012 vizio it seems to have lines but it's almost like they are blending in with the game it's wierd but I can see them still

[@massoudmakes]

I am not an expert on this, I just did this on my TV and it worked so I cannot help you sorry.

[@jethalal40]

have samsung Model # LN52A850S1F has few vertical lines in the middle any suggestion

[@massoudmakes]

I am not an expert, sorry I cannot advise you.I just tried this on my tv and it worked.

[@rajeshkalkal5896]

Raoji Patel

[@sahibhussein5107]

Thanks for the video. How fix whire vertical lines on samsung un55ju650df? Thanks

[@Cashmoney1902]

I have horizontal black lines at the top of screen. Will this also work? I realized one night the top corner of tv got pretty hot.

[@massoudmakes]

+Nikesh Patel Sorry I don't know about your TV.

[@whale82]

Thanks alot for this video - I have the UE55C6000 and will try this solution :) Have you been issued with the stripes since the fix? My TV has the stripes for about 10 minutes but often dissapear when it's "warm".

[@massoudmakes]

You are welcome. The stripes have come back but the fix lasted for two years which is not bad for free. I have bought a new samsung Tv and I will try to fix the old one when I have time.

[@Ktrvrn]

Same issue here...

[@modarfandy5450]

My QLED samsung TV is the same. It shows moving colored vertical bars all over the first 10 minutes. I can’t control the tv in this time but then they all go away when it warms up and doesn’t happen again until next day when I wake up. How long did you tv last with that happening @duc Minh Ly

[@aliusman-sq1eh]

hay bro i have the same problem i just bought led 29um57 lg after 15 days a single vertical line appeared on my led when i push that border right down of that line its gone for a while but after some time its appear again so my question is that if i follow your video can i fix like it ?

[@massoudmakes]

+ali usman It all depends on what is causing it. I am no expert I only found the solution to mine after I opened it and a bit of trial and error.

[@aliusman-sq1eh]

maybe but its looking we both have the same prob

[@ΛευτέρηςΠαπαγεωργιου-ω4χ]

Is this technic workable for samsung le40a656 ?

[@massoudmakes]

I am not an expert so I cannot advice you, sorry. I just tried this method on my tv and it worked.

[@Desibiker81]

Hi i am having 40c7000 getting vertical lines but after 2/3 min then if i turn off tv for 5-6 hours and turn on it work perfect for 2/3 min any solution

[@massoudmakes]

In my case it was other way round, TV had lines when turned on but after a while the lines disappeared. After a few months the lines became permanent so I had to a DIY job. In your case I don't know what could be causing as I am not an expert, sorry.

[@Desibiker81]

What u have done

[@massoudmakes]

All the DIY work that I have done on my TV is shown in the video.

[@stimfalc]

Thanks for this! I just did it on my Samsung, same board. I did some further troubleshooting and I think I narrowed it down to that chip with a heatsink which is at 10 o'clock from the big one. It gets very hot and I think that the soldering (BGA) is loose to it. Not much to do unfortunately, I think your trick is the best. Question is, how long it will stay OK.

[@massoudmakes]

After the repair it worked perfectly for about two years then it started to happen again but only for a minute or so, then the lines would disappear as soon as the TV warmed up. Occasionally it needs a little tap on the back to get the picture perfect.

[@johnkarapanos1166]

Exactly the same as mine TV. Thank you for your advice. I gently tapped on the chip with the heatsink and the vertical lines disappeared!!! Thank you and Massoud for your valuable advices!!!

[@stimfalc]

@@massoudmakes Just an update.The HDMI connection also suffers because of this I think. Mine got so bad, that I decided to trash it, got a newer, 4K TV instead.

[@massoudmakes]

@@johnkarapanos1166 You are welcome.

[@MuckoMan]

That is a great fix! I haven't tried it yet because I haven't bought the TV on craigslist yet. Going to take a risk and buy it. I have done this trick on desktop computer motherboards before to get them running. Thanks for the vid.

[@massoudmakes]

You are welcome, thanks for watching.

[@MuckoMan]

I bought the Samsung LN55C630 for $150.00. off of craigslist. The guy who sold it to me said he just didnt want to bother to try to repair it. Its been 2 days and I havent had the lines come up. But soon as it happens I will try your fix. Thank you again. I probably wouldnt have taken the chance on this buy.

[@massoudmakes]

Good luck with the tv and thanks for watching.

[@lucywojcik33]

Okay I have a Samsung 43 inch model *LN46A540P2FXZA it turns on and off will display a good view just that it starts going crazy turning on n off and then when I connected my ps4 to it the display was horrible colored lines with a horrible sound. What is my next move! Help pls

[@massoudmakes]

Sorry as I am not an expert I cannot help you.

[@ifeanyiuche7837]

Thank you so much for the video. Have the same issue with my Samsung smart led tv UA55D7000LM. Will try it out and get back to you.

[@tajdarahmad9349]

Does it solve ur tv problem by doing so?

[@quarantinegirl4746]

I tried it yesterday my Samsung led smart tv was showing vertical lines but after using this method vertical lines were gone but only for 10 hours then came back again. So I think I will try it again.

[@JefryAnsElt]

Good job,nice tools open screw..

[@massoudmakes]

Thank you.

[@khurramkiani7235]

i have a same problem in samsung es7500 model can u fix it

[@massoudmakes]

I am not a TV repair engineer, I tried this DIY method on my TV and it worked yours might be different.

[@yuriyk4937]

You may not even need to replace the motherboard. Read online that these boards deform and one fix would be to put it in the oven at 200°C for 10 mins.

[@MrAnhell]

Opened my tv to try this and got everything opened and all just to get a noise now like its not getting enough juice to turn on...any suggestions?

[@massoudmakes]

I am not an expert so I would't know what could be causing this, sorry.

[@derandymills]

Hi Massoud, i was so frustrtated i really wanted to throw the thing out . I saw your idea, great , but i can not achive a permanent fix. Even though it worked. I have to slightly tap the TV after switching it on (2 Times) and then the pic stays. Until i switch it off and it starts from teh beginning again. Is there anybody who soldered anything since the Board with components is so tiny ?!? Obviously it has to be some sort of joint that is broken or cold through thermal expansion during previous operation. Thanks for the awesome idea though still keeps my TV working for a few more month.

[@massoudmakes]

+Andy Mills Hi Andy, the only work that's been done is the one I've shown in the video. My TV is still going a year on, only on very rare occasions when it is turned on it shows very faint lines but then as soon as it warms up (a few seconds) the lines disappear. As I mentioned in the comments before the only time I experienced lots of line on screen was when the TV was wall mounted which I no longer do. Thanks for your comment and thanks for watching.

[@ThestrivingSomali]

Hi, I have the same problem but mine is smart tv what should I do? Is this will work on smart too ? Please reply Thanks

[@massoudmakes]

Not all tv's are the same and as I am not an expert I cannot help you, sorry. I just did a DIY job on my tv and it worked.

[@tzelkelkan]

Merci beaucoup j'avais le même problème sur une tv samsung ue46c6710 ça fait 2 semaines et pour l'instant plus de lignes verticales encore un grand merci pour votre vidéo

[@obportus7177]

eu também. Aqui no Brasil é só reclamação da samsung.

[@stephencroft1612]

mine has horizontal lines, does this trick still work?

[@massoudmakes]

I am no expert so I don't know, sorry. It depends on what is causing it, in my case this method worked.

[@ItisLegit]

I have the same problem. Did you eventually replace the T-Con Board or the Main Board? I want to get the right one the first time.

[@massoudmakes]

I could not find the replacement board that had the fault so eventually I bought a new TV. I don't know what the board is called.

[@ItisLegit]

I found the main board online for my Samsung TV. If it happens again, I'm going unplug all the connectors inside and reconnect to see if it fixes permanently. But thanks anyway.

[@massoudmakes]

You are welcome.

[@vikasbathija9096]

Hi my tv model is samsung ua55d8000 My tv recently started showing vertical lines and they keep on increasing..does this will solve this problem

[@massoudmakes]

Not all tv's are the same and as I am not an expert I cannot help you, sorry. I just did a DIY job on my tv and it worked.

[@vikasbathija9096]

@@massoudmakes thanks a lot..but do you think even 1% that this is the same problem and you resolution is worth a shot..bcoz m also not an expert just trying to avoid opening up the whole console..

[@massoudmakes]

With my tv I noticed that by pressing on the top right side on the back I could get the picture perfect again, so I knew that is was some sort of loose connection and the rest you can see on the video.

[@mazenbira1776]

I have LG 55LA9650 WHICH I ONLY USED FOR 90 HOURS AND THIS ISSUE START APPEARING AND INCREASING MORE COLOR V.LINES LG TOLD ME IT'S FAULTY PANEL BUT THEY DON'T TRY THE SAME ISSUE AM AFRAID TO TRY THIS AND DAMAGE SOMETHING ELSE WHAT DO U SUGGEST

[@massoudmakes]

I am not an expert, sorry I cannot advise you.I just tried this on my tv and it worked.

[@ehometutors]

hi, nice video, i have Samsung UA32EH6030 3D tv, is shows the double pic an the downward of the original picture and then many vertical lines, would u plz suggest me any Good ideas to fix it... Regards

[@massoudmakes]

I don't know, I am not an expert, sorry.

[@laadipumi7515]

Plz I have 50inch Samsung tv which I just bought a new power board from Samsung and I just mount it on, the light is on and it makes normal Samsung sound but the pic won't show.

[@massoudmakes]

+Laadi Pumi As I am not an expert I don't know what could be causing this, sorry. I tried this on my TV and it worked.

[@xorxy459]

My Samsung Smart TV is displaying a coloured vertical lines. There is sound but no picture all I see is a vertical coloured lines. How do I fix this issue. My TV Model is: Samsung Smart LED 3D 46 inches. Model number is: UE46ES6300U. I would be very grateful if I could get help to fix this issue. Thanks

[@massoudmakes]

+Ayodeji Shofu I am not an expert and I'm not sure if all samsung TV's are the same, this method worked for me.

[@krottiz374]

thank you very much for your video tutorial, I could repair my 100-inch monitor but just served me

[@massoudmakes]

You are welcome and thanks for watching.

[@ahmadfauzy1001]

hai.my led 60"samsung tv appeared white vertical bar in the center of the lcd screen.i do need and advice how to solve the issue.tq

[@ggalfredson]

At minimum it shows how fragile the board grounding can be...nice work...

[@themanthemyththelegend1392]

Its not grounding its a faulty connection at the BGA and now the board is not fully seated on the thermal pad so it will accelerate the problem much faster that TV is dead now....... Proper repair would be to reflow and replace pad and reseat all connectors.

[@joeycarr1398]

My tv's image and sound begins to brake until it is gone and the screen turns dark gray . Any suggestions?

[@massoudmakes]

Sorry, I don't know what could be causing it.

[@proto718]

I know what I'll be doing this weekend. I'll let you guys know if this resolved the same problem on my Samsung UN40D6000sfxza.

[@TheOnlySpareBox]

My TV is dim on the right side will this fix?

[@massoudmakes]

I don't know, sorry.

[@trippyness]

I want to do this but I am worried about being electrocuted when I am testing where to raise the T-Con board? Should I wear rubber sandals or something like that?

[@massoudmakes]

TV was unplugged during repair until the adjustment and then an insulated electrician's screw driver was used.

[@UGotHookah]

ya_boy_NOTE that's okay man Cinema 6 Theaters

[@niceguy1183]

How long will this continue to work?

[@massoudmakes]

+Nice Guy! It is still working on my TV.

[@mohammedataurrahaman9247]

LED 24inch no dispaly and vertical line problem 28LA452A.TA so the salution

[@massoudmakes]

I don't know, I am not an expert, sorry.

[@winandabakker7032]

I have dark vertical lines at my samsung ue46d8000 Can i fix this?

[@massoudmakes]

I am not an expert so I cannot advice you, sorry. I just tried this method on my tv and it worked.

[@struong57]

Will this work on a Samsung LCD TV?

[@massoudmakes]

It all depends on what is causing the problem, I found the problem point on my TV and managed to find a solution for it. As I am not an expert I cannot be of any more help, sorry.

[@struong57]

+massoud147 my Samsung LCD has the same problem as yours, vertical lines. I found that slightly jiggling the HDMI ports would make the lines go away. But it's gotten to the point now that jiggling those vertical lines no longer resolve the issue.

[@massoudmakes]

Sorry I don't know what is causing this problem on your TV.

[@struong57]

massoud147, I followed your instructional video to remove the back cover off my TV and discovered that I had a broken HDMI port. My TV is working flawlessly after removing that broken port from the board. Thanks for your video! 👍🏼

[@massoudmakes]

You are welcome. I am glad you managed to fix it.

[@joebeequan]

hello please can you help me to get the main board (model SK10BN9403405B) 2010

[@massoudmakes]

Sorry I cannot help.

[@lijoxavi]

Thank you so much bro It did work for me Many thanks again, God bless you

[@massoudmakes]

You are welcome, I'm glad it worked for you.

[@RockLee140391]

you're simply the best! fixed and work like a charm!

[@massoudmakes]

+Tiziano Cavalli Glad it helped.

[@CasualGamer2K24]

What did you exactly do? Open it up and then what?

[@cezary8222]

what about the connectors next to that screw? Have you tried to unplug/replug them? Also is safe to work on the tv with tv plugged in? Touching something on the board would probably damage the pcb...

[@massoudmakes]

Yes I did try that it made no difference. As you can see in the video TV was plugged in after the assembly and only to adjust the screw to get the clear picture on screen. PCB is already damaged so I thought it was worth a try but that's what I did on my TV and I am not suggesting that everyone should do the same.

[@shauryapratapsingh8376]

Bro How to discover Panel Problem in Samsung SA300 Monitor

[@massoudmakes]

I don't know, I am not an expert, sorry.

[@tommysueadams9510]

Looks like a ground issue. Use star washers with the screws.

[@hemantrao7058]

My samsung LED 2 lines blue and yellow how can you do this problem

[@massoudmakes]

I am not an expert so I cannot help you , sorry.

[@bryanshackelford7141]

can I do this on a Samsung plasma

[@massoudmakes]

I don't know if this works on all TV's. I tried this on my TV and it worked.

[@Ishita2367]

Led tv screen per vertical four line show problem

[@aulamatematicosh5417]

tengo un problema con mi televisor samsung al lado izquierdo de la pantalla me sale como un efecto de lupa una franja lo demas esta correcto

[@massoudmakes]

Sorry, I don't know.

[@ManishVerma-wi4og]

How to no that this model tikon voltages

[@massoudmakes]

I don't know, sorry.

[@arminivs_war_metal]

I walked to the TV-screen and pressed on the back somewhere I guessed your video told me to mount the screw and... voila.. Thanks!

[@massoudmakes]

+Willem van Balen You are welcome, glad it helped you.

[@theplanetofgames]

How about horizontal lines?

[@massoudmakes]

I don't know why lines appear, horizontal or vertical. I only got vertical lines and the DIY job worked.

[@oscarlobaton979]

Horizontal for the knowledge of any reader is a different problem so avoid doing this.

[@arthurmckenna2578]

Thanks, I will give it a go, with a second set of eyes to help me remember every step: mine is a UN40D6000SF smart tv maybe 6 years old

[@massoudmakes]

Good luck and thanks for watching.