WALL MOUNTED CUSTOM (BUDGET) PRESSURE WASHER SETUP FOR A CAR DETAILING

Рет қаралды 22,578

Matty's Garage

Күн бұрын

Пікірлер: 65

@Matty.Garage Жыл бұрын

Let me know what you guys think! Also, all the links are in the description below! 👍🏻

@26-CJ 7 ай бұрын

Hello. Thanks for sharing your install. Question. Do you have a link for the spigot. I assume it’s a quarter turn valve. What length is your stainless steel bucket filler hose and your stainless steel hose that connects to your pressure washer.

@Zionfarm 6 ай бұрын

Loved your setup and the use Lowe’s parts. Major price decrease by sourcing your own parts.

@lennypalumbo7739 14 күн бұрын

Setup looks nice, you did a great job 👍

@chadgardnerdds3197 10 ай бұрын

Looks nice. A suggestion would be to use buffer tanks of pre-filtered water to feed your DI system so it will last longer if you have room. I got a couple smaller IBC totes from Facebook marketplace for $150. Clean them REALLY well with multiple cleaners and finally IPA. Bought 6 cheap ceramic filters from Amazon. The regular water goes into the first 50 gallon tank with a float valve shut off to keep it full. The water gravity filters very slowly through the ceramic filters into a 350 gallon holding tank when I’m not washing anything. Whan it’s full, another float valve shuts off all water coming into the system. The 350 gallon tank has a 9 GPM pump pushing the water through the DI filters, into pressure washer, etc. Also used 3/4” PEX. TDS after the ceramic filters dropped from 300-400ppm to about 40-80ppm. My current DI filters are now giving me 0ppm water after 14 months and hundreds of washes. Plus I’m washing with near-DI water which seems to help a little. It takes a good bit of space and a battery to power the 9 GPM pump, but it cost $400 max to build. I want to add a tankless water heater but don’t have room in my breaker box for the big breaker

@isaacrobles846 5 ай бұрын

Nice man, super informative. Thanks for sharing!

@redsoxz1259 Жыл бұрын

Man that is a clean well thought out setup. I will have to save this video for when I do mine for inspiration 👍

@Matty.Garage Жыл бұрын

Go for it! Thank you for the support!

@garymay3072 Жыл бұрын

I LIKE THE RED ONE!!!! LOL/ Great Vid as always Bro!

@hmmmmmmmmmmod Ай бұрын

Thanks for sharing ur set up and all information u shared. If i will add something to ur awesome set up i will use retractable reels instead of normal reels

@CUTS67 Жыл бұрын

Great job man thanks for video

@Matty.Garage 5 ай бұрын

Thank tou

@ant1374 Жыл бұрын

First of all, love the jersey bro, my wife is Polish. Very clean install, love it 👍

@Matty.Garage Жыл бұрын

Thank you sir! I did live in Poland for 7 months!

@vtxdaryl 2 ай бұрын

You did a great job, well thought out. Great job and video.

@santirockford4530 Жыл бұрын

Great job amigo! Good layout.

@Matty.Garage Жыл бұрын

Glad you like it!

@dannytaino9116 Жыл бұрын

Nice job Matt 👏

@Matty.Garage Жыл бұрын

Thank you sir!

@ProtectiveDadPranks Жыл бұрын

Pure ENVY ❤

@Matty.Garage Жыл бұрын

Let’s do it in your garage!! ☺️

@VADER_C5 Жыл бұрын

I might have to come and test it out!

@Matty.Garage Жыл бұрын

Appointments available

@PLLuxuryReviews 9 ай бұрын

Great video

@jjuarez274 2 ай бұрын

Great job 👏

@tiagoricardotolentino Жыл бұрын

Great job dude!!!! 🔥

@Matty.Garage Жыл бұрын

Thanks 🔥

@davidbundesen5867 5 ай бұрын

Well done. Very clean installation. Kudos.

@Matty.Garage 5 ай бұрын

Thank you so much!!

@dustind9242 Ай бұрын

Very nice. Both sidewalls in my garage are concrete block as well, which was making me consider putting up a sheet of plywood to mount everything to, but yours turned our very nice without adding that extra step.

@blck04gt 5 ай бұрын

Awesome video! What 3/4" NPT elbow did you use coming off the in and out of the 2 stage canisters?

@MRUISBIG Жыл бұрын

You should be proud of yourself, considering what others be selling their systems, for which is outrageous. Especially in these times.

@Matty.Garage Жыл бұрын

Thank you so much for the nice comment! I really appreciate it

@knottssonasty3603 Ай бұрын

Very nice work dude. I love it. We just bought a house and I’m looking to do this very same setup w the same active 2.0. I still need to run the water the electric is already there. Looked very cool. Had to drop a sub!

@Matty.Garage Ай бұрын

Thank you sir! I will do a new update video so you guys can see how it is going so far!

@randyk2904 6 ай бұрын

Excellent job and video work too . Thanks

@Matty.Garage 5 ай бұрын

Thank you so much

@stephen6157 Жыл бұрын

Nice job🔥🔥

@Matty.Garage Жыл бұрын

Thanks 🔥

@gjoniny 5 ай бұрын

I have a similar setup up but use spotFree canisters, but now im thinking placing some filters to lower tds into spotfree because my tds is high and makes the spotfree work harder and have to replace resin more often

@Matty.Garage 5 ай бұрын

I agree… you should do that

@asymptomatic84 Жыл бұрын

nice. what bolts did you use to mount to the wall. i had my contractor set up mine but it wasn't as clean as yours

@kencanada4492 10 ай бұрын

Running 1/2 inch pex, do you notice any water starvation to the active 2.0 ? I was going to run 3/4, but a lot better selection of shutoff values in 1/2 inch

@adipierwszy1730 4 ай бұрын

Piękna koszulka. Biało Czerwoni do Boju🇵🇱🇵🇱🇵🇱🇵🇱💪

@davidbram Жыл бұрын

Clean!

@Matty.Garage Жыл бұрын

Thanks!

@josevenegas214 Жыл бұрын

Hey bro I noticed you play the filter supply backwards is that still OK?

@Matty.Garage Жыл бұрын

It is no backwards… i did swap the way the came, you can just do it! Actually the instructions will tell you thet

@Mr_D555 7 күн бұрын

What size Pezeshkian did you use

@93V 11 ай бұрын

have you measured the gpm flowrate through the filter? on the description, it says it has a 0.75gpm restrictor and i understand that you want 1.5-2.0gpm for foam cannons. obviously it looks like it's working well from your video. also, any idea how many washes you will get out of the filters before you change the resin? your tester said 430, their product page says it will remove 1800-2000. TIA