Max Torque Clutch Assembly Video

How To Video
www.maxtorque.com

[@stevespanos75]

Such a clear demonstration and explanation of what you are doing with this clutch assembly. Well done. A good teacher. I know more now, thank you.

[@ericrollins4363]

perfect example of a correct demonstration. well done! Thanks

[@dontommaso4420]

Thanks Jim! Excellent Instructions

[@johnkoehler4034]

Thank you. I've been struggling with reassembly for 60 minutes

[@gdlove9135]

My eyes went what,,,, very quick installation for clutch...especially the 1 inch pvc.. 👍 great video..

[@NATHAN_SIMPSON]

Do you know where he got the spring for the clutch?

[@Tacomaracing]

Best tip I've seen in a long time!!!!

[@wm973]

10 thumbs up!I just watched a vid where the guy struggled... with a helper to get that spring in properly. You made it soooooo simple. ThanksWM

[@sgtjasonshrout]

Great presentation and info! Thanks!

[@cjlooklin1914]

Thank you I finally understand how clutches work

[@captin628]

Excellent video

[@libbysmith1282]

This will be very helpful when I replace the cemtrifungal clutch on my gokart. Thanks!!!!!!

[@RadiantFreeEnergyResearch]

Great video! I’m considering using one of these high quality clutches as part of an electric start for My Ryobi 900 Propane Generator. We add an electric start system to the 1.5HP 40cc (60-70psi of compression) and the one way bearing assembly we use is making a lot of noise. We are now considering the use of a clutch, which may be a quiet solution once the engine is running. The clutch itself would only engage when the starter motor is spun. Mounting the centrifugal clutch to the starter motor, and the clutch housing which engages upon higher rpm, to the engine flywheel assembly. It’s the opposite of how a centrifugal clutch is often applied, however may work well for our application.

[@mauerjax]

Thanks! Worked great!

[@SilentOne0990o]

Thanks this video helped a lot

[@232Stangpwr]

Wow perfect! Thanks!

[@JoseMauricioTeixeiraPereira]

Thank you for the video

[@fencer39]

excellent video !

[@minorpyro69]

We thank you too.

[@01Can]

great video

[@RUDIE98]

'thanks so much for your clutch spring installing tips. it was a great help..........Joel

[@pyrog.c.c89]

Thanks 4 the info 🇺🇲

[@robhawkins6018]

nice job //////// Gotta luv old school

[@greggory448]

Like a BOSS 😊

[@nickstone7506]

I’ve been working on getting the spring in the shoes for 4 hours

[@KevinMillard68]

its sure will make it lighter with all thoes holes but it will comprimise the intergraity ,, the rest of the video was great and good information for sure

[@johnswanson7887]

Thank you so much I took mine apart it flew apart I was wondering how the hell I was going to get that spring back in awesome video

[@TheAlhblue]

Thanks now I know my clutch inside and outside

[@NATHAN_SIMPSON]

Do you know where he got the spring for the clutch?

[@Yundsy]

@@NATHAN_SIMPSON same

[@heavystarch100]

Masterfull!!👌👌👌

[@ahumad13]

I have a question, on bicycles between the gear teeth are more pedal reaches more speed. Now if I change the gear to cluch by the star that leads the spoiler bar tires and I put Star cluch to the bar this would reach more serious speed or slower. but I am new at this I just finished my courses in welding and cnc machines and have many things that come to mind and before to spoil the best parts wonder.

[@motoristchamblizi8463]

I have an extra clutch can it be modded by dropping out the teeth and welding on a v belt pulley?

[@ELVISRN1]

SO WHERE IS THE BEST PLACE TO BUY A YELLOW SPRING? I NEED ONE

[@HOARedneck]

In the sprocket part is the brass bushing suppose to be sticking out of the back some? Or is it flush with the front part? I took mine apart and it kinda got messed up and I think the brass bushing has moved some.

[@bibbastard]

Can you please explain to me the purpose of altering that clutch and what that particular application will do for the minibike , or what ever that clutch is for. I'm really not mechanically inclined and I would be much appreciative if you can explain that to me.

[@ruturajpatil2582]

where do i get the maxtorque spring please reply

[@jaysaw8151]

very helpful

[@minimadness40]

where do I get the heavier black spring? thank you..

[@leeisenberg]

My clutch is belt driven, but looks interchangeable w/ this chain driven type, correct?? They go for $60 at TSC, wish I'd gone ahead & got it. Thanks for sharing this, take care from Tn.

[@MRT2249121]

great!!!!wow!!!

[@knifecollector54]

i have a max torque clutch and the bike has sat without running for around 6 years when you pull the throttle it doesnt want to grab at all it has been oiled but still nothing happens , please help

[@angellainez785]

donde lo puedo comprar

[@blackhalo1223]

I took that first ring off and in won't come off?? I need help

[@Catz0125]

A different spring will change what rpm the clutch engages at. For example, if you feel your clutch is engaging at too low an rpm, you might want a stronger spring to keep the shoes from engaging too early.

[@ruturajpatil2582]

i have a heat damaged. clutch who's spring has lost a bit of its tension i need a new clutch. or a new spring. can anyone suggest me a idea my go kart is engaging when i start it..

[@ompetalheadshow]

Can you guys make a video of cutting the shoes so there are 9 then install?

[@julioyperla]

how do i remove a clutch like this from the drive shaft ?

[@TomTCincyO]

I have to ask how many takes there was during filming? Lol thanks for the good info, you make it look so easy!

[@NATHAN_SIMPSON]

I know I’m extremely late but where did he get that spring for the clutch?

[@abhishekganesh9256]

hello sir.., I am planing to use this clutch in my fuel efficient car...do you have any idea about its efficiency....weight reduction idea is best...i will definitely implement that.

[@Catz0125]

There should be a set screw on the clutch that you need an allen wrench to loosen up. Loosen that up, and it should pop right off.

[@joshs.5623]

Colonel Potter? From MASH 4077?

[@leeisenberg]

Do you know how to take the pulley off of a drum?? Looks like just a press fit.

[@egizaidan3682]

How long is the spring in cm?

[@emilelaah4119]

hello please I need that clush

[@Tomtom31089]

Do you guys sell 7/8" bore Centrifugal clutches? i have a go kart that needs a clutch

[@brockmorgan75]

Kool

[@yennoriegaesquivel8217]

Señor muy buenas noches muy bonito su video mi nombre es Yen Noriega, estoy construyendo un Drift Trike quisiera me ayude para moder construir un embrague que materiales necesito y mas medidas o donde lo podria conseguir gracias de antemano saludos desde Peru.

[@josequiroga9715]

POR QUE NO ESTAN TRADUCIDOS AL ESPAÑOL LOS VIDEOS PARA ENTENDERLOS?

[@riki269]

I thank you sir for such a nice video,,,now I can fix the thing w/o going nuts....=+)

[@hugochavez4150]

very nice.my clutch is a #35 with 12t.from amazon.does that mean i need a # 35 chain?

[@user-neo71665]

yes

[@hugochavez4150]

Thanks

[@giffy5775]

I don't see why you need to screw the drum to the board. Seems like it will stay in place just fine.

[@cachidril]

so, a harder spring is much better ???

[@Deucealive75]

A firmer spring will make the clutch engage at a higher RPM which may be better from a performance perspective.

[@lazzlonewolf]

where do ya get that spring??

[@fastlifelou6124]

Bmi karts

[@gosuck1999]

I mean this video for 6 years old very clear

[@fastlifelou6124]

Trying this once i get 62 gram shoes and yellow spring in the mail

[@giffy5775]

If the hole in the board was bigger you wouldn't have to take the gear off the drum.

[@bradcarpenter2396]

Black spring does not go in that easy for the layman after they've done half a million like you maybe it's easy that someone who's done it like three or four times and failed and cussed you out to no end it doesn't work that way old man

[@Muthafukah12345]

yer tip of the week you only have 1 vid and i can make my cluch way eser and it works better than that

[@FrustratedBaboon]

Excellent video