Mazdaspeed 6 kelford 247-C cams idle

[@cameronrobinson6047]

@bigshoms3 I ’ve watched this video so many times, I’m beyond geeked to hear my build! I got the 247-C2 Kelford cams with dual valve springs/supertech valve components for my fully built MZR DISI build! For the bottom end it’s got the Manley Platinum Series Extreme Duty Pistons with Manley Turbo Tuff Pro Series I-Beam Rods! Plus keyed crank and others goodies!🤙 🏎💨

[@DONUTSKIE]

Do you have an instagram or facebook that I can see your build? Was looking at the D or C and was curious about the c2.

[@adrianhayden7430]

Mmmmmmmmmmmmmm. Congratulations Sho - it's perfect

[@Kelford-Cams]

Nice, sounds like a perfect install!

[@catlady8324]

My grandma’s sewing machine sounds just like that.

[@brotherhood_ofstreetracers4268]

Real quite at idle probably making north of 600 though

[@eleoitkumar]

Did you get the cams pinned or relying on the friction washers?

[@DONUTSKIE]

Do you think the Kelford 247-X from SP63 will be the same as this?

[@zsleepywarsz]

2.3?

[@lukasjohansson64]

where did u get the rear lights they look amazing

[@sohankghosh]

M6customs

[@isaacw8195]

Sounded throaty. No revvs and all tease though huh? Maybe a go pro exhaust video of some driving? Yes please and thank you lol

[@sohankghosh]

Once not at idle, it sounds like every other mazdaspeed with an equal length manifold haha. This was just to show the idle with the cams

[@isaacw8195]

@@sohankghosh How is drivability? Pretty normal I'm assuming?

[@sohankghosh]

@@isaacw8195 pretty normal,yes. The shift in the power band is quite noticeable though with my large turbo. It got pushed further right than when on stock cams, but the flow gains up top are worth it

[@MarcGismondi]

Does this cam suck to daily? im thinking about this or the -B, Im planning on around 650whp

[@sohankghosh]

@MarcGismondi the B is definitely more streetable. The C cams are fine, you just have to adjust your driving to be a gear lower and keep rpm a bit higher. Not a big deal, as you should be doing that anyway if you have a properly large turbo

[@MarcGismondi]

@@sohankghosh i have a cst6, does the car jerk in first gear with those?

[@sohankghosh]

@@MarcGismondi mine always has with the Corksport throttle body. But the cams didn't change anything.

[@sully4607]

You still have this thing??

[@AlecBurnsRed]

Yeeeeeeeeeess. Now 40psi.

[@sohankghosh]

Once I have a working ebcs, we'll start turning it up!

[@sainig1996]

Full exhaust??!!

[@sohankghosh]

Yes.