No video

Mazdaspeed3 She's ALIVE!!! First engine startup | Engine Swap Series Part 7

  Рет қаралды 996

MisterET

MisterET

Күн бұрын

In today's vlog I finish buttoning up the engine and start the Mazdaspeed3!
Song:
Ikson - Harmony
/ ikson

Пікірлер: 14
@franklinquintanilla2912
@franklinquintanilla2912 4 жыл бұрын
Heck yeah finally got it done. I enjoyed the whole process. Helps me out if I ever need to change my motor out of my speed 3. Keep up the good work.
@brizzlefizzle
@brizzlefizzle 4 жыл бұрын
Where’d you get the engine?
@misteret5441
@misteret5441 4 жыл бұрын
From someone who bought a rolled car at auction. The engine was low miles and in great shape. Can’t say the same for the rest of the car though.
@hellbun7777
@hellbun7777 3 жыл бұрын
Hey i need help eith my mazda engine i just replaced
@laurasmith2456
@laurasmith2456 2 жыл бұрын
The wiring harness that goes across the front, there's a gray plug on the right side of the front near where the front sensors are on the harness. I can't find where it plugs into! HELP! The piece of harness that this plug is on is about 5 inches long and clips to the front support so I'm not sure what is supposed to go there.
@misteret5441
@misteret5441 2 жыл бұрын
An injector maybe, cps what side of the engine passenger or driver ?
@laurasmith2456
@laurasmith2456 2 жыл бұрын
@@misteret5441 it's just to the right of the hood latch when facing the car, on the harness that runs behind the front core support. The plug is gray and it is on a short line coming out of the harness. There is nothing around I can see to plug it. Maybe a crash sensor that was removed before I got the car?
@davidlegrange2688
@davidlegrange2688 Жыл бұрын
​@laurasmith2456 did you manage to find where that plug hooked, too, as I also can't find where it hooks to
@laurasmith2456
@laurasmith2456 11 ай бұрын
@@davidlegrange2688 I never did but the car runs great anyway!
@davidlegrange2688
@davidlegrange2688 11 ай бұрын
@laurasmith2456 thanks for the reply, I found out my timing was off so finally got the car running properly and have also just forgot about it now ahahaha
@salomongomez8499
@salomongomez8499 3 жыл бұрын
Hey I might need to swap am engine in my MazdaSpeed3? I haven’t done a replaced a engine but you think a novice diyer can do it?
@misteret5441
@misteret5441 3 жыл бұрын
If you have good experience working on cars and are meticulous at identifying what goes where then likely yes but I would strongly recommend doing it with someone who has experience as a sidekick and having a service manual with you to refer to as you can get lost pretty easily. I’ve done about 70 swaps over the years but the first one was quite something !
@chiclaalvarez5107
@chiclaalvarez5107 3 жыл бұрын
Hey quick question do you think you could sell me the orginal engine ???
@misteret5441
@misteret5441 3 жыл бұрын
It’s all apart, the head is sold, I’ve thrown away much of the rotating assembly and pretty much have the crank and vented block left.
Will a barrel of engine flush clean a sludgy engine?
12:54
Garage 54
Рет қаралды 970 М.
Секрет фокусника! #shorts
00:15
Роман Magic
Рет қаралды 61 МЛН
Or is Harriet Quinn good? #cosplay#joker #Harriet Quinn
00:20
佐助与鸣人
Рет қаралды 46 МЛН
Why you should NEVER brake while hitting a pothole
22:33
Garage 54
Рет қаралды 1,1 МЛН
We Drove The Beast // A 27-Liter V12 Spitfire-Powered Monster
22:27
Throttle House
Рет қаралды 2,1 МЛН
This TINY Nissan Engine is More Powerful Than Your Car!
15:46
DRIVETRIBE
Рет қаралды 678 М.
Is it Bad to Redline your Engine? Can it be Good?
27:52
Conquer Driving
Рет қаралды 1,2 МЛН
4 Signs Your Engine Has a Serious Problem
25:05
Scotty Kilmer
Рет қаралды 2,6 МЛН
The Best Spark Plugs in the World and Why
8:38
Scotty Kilmer
Рет қаралды 4,6 МЛН
Rotary Valves Make Normal Valves Look Silly - Why Aren't We Using Them?
17:14
driving 4 answers
Рет қаралды 2,1 МЛН
We make a fully custom ball bearing crankshaft
21:53
Garage 54
Рет қаралды 658 М.
500 subscribers!!!! A huge thank you to all of you!
5:48