Always coming through for the community. I have so much respect for this man. I won't start making more income to be able to mod my car like I want for another 3 years but I will always be coming back to these videos
@NoHairRedBeard9 ай бұрын
3 years is here. Any luck?
@alexr90993 жыл бұрын
Glad I found ur channel, I just got a 06 mazdaspeed 6 and love all the knowledge you have on these cars. Thanks for sharing. Keep it up man!
@Sloazz63 жыл бұрын
Thank you
@underrated76383 жыл бұрын
Thanks again for the install brotha! I’ll be uploading my side of the video soon haha 💪🏻
@sergiomondesir88633 жыл бұрын
You do GREAT work....You dot the I 's & cross the t's..! I wanted to replace my final gear on my speed3. I was looking at going with a longer gear SETUP.... also installing the brass bushings, for BETTER shifting... I live in n.y.
@Sloazz63 жыл бұрын
I wouldn’t recommend it if you don’t have the power. Stretching the gear ratio requires 650hp or more to fully utilize it. If not, it’ll make your car a lot slower than it currently is.
@austinriley73563 жыл бұрын
i always have a terrible time replacing or changing the turbo. Definitely gonna start taking the alternator/ manifold off
@gman123ava3 жыл бұрын
I love Colorado cars that’s a clean ass motor
@HarryQ883 жыл бұрын
Love the videos on the speed 6, gonna start modifying mine. From the UK time to get some more power 💪🏽💪🏽
@mitchp853 жыл бұрын
Just about to pull the pin on a CST4 and Tial - thx for this video, nicely done.
@IceCold13 жыл бұрын
*Videos Looking cleaner and cleaner bro!! Nice Turbo install as well!*
@Sloazz63 жыл бұрын
Than you bro
@IceCold13 жыл бұрын
@@Sloazz6 no doubt bro! Keep up the amazing work! I may need some work done as well. Lol
@Sloazz63 жыл бұрын
Sure thing bro
@GEE-sv3lk3 жыл бұрын
I really enjoy your videos, very informative and helpful. I'm about to install the cst4 on my ms6 and am not replacing the exhaust manifold but am going to remove it to make replacing the turbo much easier. Was there any special tools necessary to remove all the bolts in the exhaust manifold?
@Sloazz63 жыл бұрын
No special tools
@kooua8118 Жыл бұрын
What size is the hose from the grimmspeed to the tial?
@Frank-zl7rn Жыл бұрын
Oh how I wish you would have had time for more detail on the actual turbo removal
@raquielcross57573 жыл бұрын
Thanks for the video, lots of helpful info..
@BIGH05S3 жыл бұрын
Just did this last night and messed up the oil feed line 😠 then tried to unbolt it and stripped it out so I had to cut it off with the angle grinder.
@TheDamoncoy923 жыл бұрын
I’m new to your channel and love what you’ve done with your car. I just got a 2013 Mazda 3 that I’m building and been looking around and can’t find a lot of stuff like a turbo and dump pipe etc a lot of websites don’t carry it for my engine any suggestions?
@MS3ZACK3 жыл бұрын
Where did you route the screamer pipe ? I want to go external on my daily but worried with going hood exit with weather
@Sloazz63 жыл бұрын
It’s under the car
@dennardtaylor80943 жыл бұрын
Great videos & content. Do you have to upgrade oil line for turbo? Planning on getting a CST5 turbo. Thx
@Sloazz63 жыл бұрын
Nope. Stock works
@haydenk.87199 ай бұрын
How were you able to prime the engine to get oil in the turbo? Did you just unplug the coils or was it something to do with the accessport?
@BrandonRKD6 ай бұрын
Hold gas pedal down while cranking will prevent it from starting.
@erikabelair89763 жыл бұрын
do you have to put a front mount for an external turbo wastegates
@radgealkins Жыл бұрын
Can I do this to my 09 Mazda 6
@flakomzr21133 жыл бұрын
U need a tune to run this turbo?
@Sloazz63 жыл бұрын
Yes
@Timfield.423 жыл бұрын
How much do you charge for work done? Might ask for some help, apartment living isn't easy 😂😂😂
@Sloazz63 жыл бұрын
Depends on the work
@mariodantas19753 жыл бұрын
Hi fellow, I have a question, how did you do to make the engine turn without starting (to feed oil into turbo) ? dis you do something with the accessport device ?
@Sloazz63 жыл бұрын
Hold the gas pedal wide open while you crank the engine
@z2xtra783 Жыл бұрын
How did you prime the engine…?
@BrandonRKD6 ай бұрын
Have gas pedal pressed down while cranking and it won't start.
@robertmestas772 жыл бұрын
From stock topmount did u feel a difference after u installed an upgraded topmount?
@dannyjr7997 Жыл бұрын
Better off just doing the front mount intercooler, it gets way cooler air into engine.
@mortysmith55563 жыл бұрын
Imagine a 2nd gen speed6
@eddiesantana85663 жыл бұрын
Your videos are a huge help, sad to say I'm having a throttle response issue. I max out a 3k rpms and traction control light comes on checked spark plugs, changed o2 sensor for bank 1, checked maf sensor but still having the issue any idea what it could be?? It's frustrating cuz it's my daily driver and I can't get anywhere with out it
@Sloazz63 жыл бұрын
Probably bad coils
@eddiesantana85663 жыл бұрын
@@Sloazz6 thanks again for the feedback. Highly appreciate you taking your time and responding back. I'll deff look into that and see. Any preference on coils?
@Sloazz63 жыл бұрын
Oem
@eddiesantana85663 жыл бұрын
@@Sloazz6 gotcha thank you for your feed back I'll give that a try n see what happens
@eddiesantana85663 жыл бұрын
@@Sloazz6 changed coils and still getting same issue. Think it's in limp mode or something. Any other ideas
@benalski0093 жыл бұрын
I had a lot of work done on my speed six but a year ago I was on the highway car turned off was never able to get to run again don't really know what happened, car sort of starts with a battery charger attached, I'm assuming I just blew the engine. Would like some advice
@Sloazz63 жыл бұрын
Start with compression test.
@benalski0093 жыл бұрын
@@Sloazz6 will do
@carlosmontoya82713 жыл бұрын
Hey man with an iwg cst4 will you need that boost controller?
@TheMetalNut19963 жыл бұрын
Your best bet would be to use a boost controller still
@HoUsEoFcAtS783 жыл бұрын
Anybody you would recommend I can send in my injectors in for servicing? I am having trouble finding a local place here in Michigan.