How to change brake pads and rotors on a Mazda MX5 Miata ND ND2- installing Carbotech XP10/XP8

How to change brake pads and rotors on a Mazda MX5 Miata ND ND2- installing Carbotech XP10/XP8
I did not mention it the video but it is recommended to clean the rotors with a brake cleaner prior to the installation. Many times the rotors have a thin layer of oil to protect them from rusting prior to being installed. However the rotors I had where coated instead hence I did not see any need for that.
Video chapters:
Intro 00:00-02:05
Tools needed 02:05-04:34
Front brake pads removal 04:34-07:14
Front caliper removal 07:14-08:28
Front rotor replacement 08:28-09:09
Front caliper assembly 09:09-10:01
Front brake pads assembly 10:01-13:22
Rear caliper removal 13:22-15:21
Rear brake pads removal 15:21-15:53
Rear caliper bracket removal 15:53-17:11
Rear rotor replacement: 17:11-17:40
Rear slider pin removal, grease and assembly 17:40-19:25
Rear caliper bracket assembly 19:25-19:47
Rear brake pads assembly 19:47-21:01
Rear caliper assembly 21:01-23:21
Outro 23:21-24:32
In todays video I will be showing how to install new brake pads and rotors on my 2019 MX5 30th Anniversary.
The car has 4 piston Brembo calipers up front and standar done piston calipers that is shared amongst all 2015-2021 MX5 ND and ND2 models.
I will be installing Carbotech XP10 on the fronts and Carbotech XP8 on the rears. I will also be installing OEM brembo brake rotors.
WIth regards to the brake fluid I will be running Motul RBF600 however I will do the fluid change once the we are close to the season start
Link to shop manual for referencing torque specifications:
www.hexorcism....
Front rotors: 09.C391.21
Rear rotors: 08.D224.11
Pads front: CT1379-XP10
Pads rear: CT1180-XP8
Motive power bleeder
amzn.to/3vUSgsa
Pin punch set:
amzn.to/47jmeV9
Tool to retract rear pistons:
amzn.to/4dQR61G
Clampss for front pistons:
amzn.to/3XyRdcj
Ceramic paste:
amzn.to/3XyGfUl
amzn.to/4gfKgUU
Silicone grease
amzn.to/4gj5vFA
amzn.to/4ed6Lbj