How Producing a Car Exhaust Mufler From the Sheet of Metal | Manufactring of Car Slincer

[@FirstnameLastname-pe5ib]

It's like they're living in the 1930's. This is absolutely amazing. This country will be far less likely to be impacted by economic problems. They are already at the "bottom" so to speak. I say that with the utmost respect. What can the u.n. and world economic forum try to take from them? They are fully independent craftsmen and have earned EVERYTHING they have. Much respect. This is real manhood on display.

[@bigbill2664]

People wer not hand pounding mufflers in 1930 lol they wer far ahead already

[@monad_tcp]

@userhome771 highly doubt it, URSS was more corrupt than anything else.

[@dennisneo1608]

All Islamic countries are in the 1930s.

[@sultanAli-lb4cf]

Xvm😢

[@lifeonthefarm6001]

It’s probably some US corporation that owns those people.

[@ВладимирВладимирович-ы8ч]

Это просто одуреть можно от таких работ. Они как в карты проиграли все кому то и работают как киборги какие. Браво спасибо за фильм. И что интересное работать с металлом без рукавиц с голыми ногами в шлёпках это просто (БЕЗ СЛОВ) Какая то планета у которой девиз . "нам не нужно вкусно нам нужно много"

[@ЖитьХорошо-в9к]

Такие же мысли пришли😁

[@Ericksonvel]

Suzuki было написано на штампе

[@СергейС-ж5б]

ну это залупа, а не выхлоп....

[@steveham2622]

My Dad was a helluva welder in his time. He used to make all his mufflers for his trucks and cars... and one motorhome. He put baffles in them and packed 'em with steel wool instead of fiberglass. They really sounded good but they were just like cherry bombs after the wool rusted away.

[@markstarmer3677]

Got to admire these workers. Using basic tools and machines, yet still doing a job. Working with hazardous materials and steel etc wearing flip-flops !

[@joeblogs5163]

It's why they can make things a lot cheaper H&S, what H&S 😂😂😂😂😂

[@kennylavay8492]

No one there on wel fare everyone has a job.

[@ovalwingnut]

ALL these guys must be good. When I do a cursory "finger count".. they seem to all be there. Good job! And I LOVE those OLD machines. 3 things that will never change: Death, Taxes and THOSE MACHINES. Thank you gentlemen. Cheers!

[@martinharris5017]

Amazing to watch. this place would be shut down in an instant in New Zealand as a Health and Safety nightmare, but it's reminiscent of how I make things at home!

[@АлександрИгнатьев-ю5д]

It's called a small private business .

[@martinharris5017]

@@АлександрИгнатьев-ю5д Indeed it is, but in NZ it would be called "unsafe" and they would shut it down!

[@brianbond7754]

Love seeing people work hard .they all are hard working. Safety is not a thing but give them up most respect.

[@willysnowman]

Trump wants this for America! You just need to buy his made in China MAGA hats.

[@jerryj5606]

That means alot coming from a country that sanctions the poorest poor, shame.

[@peterlloyd1434]

Your comment reminds me of that joke. “I love hard work, I could watch it all day “ 😂

[@erod6214]

Dang. And all this time I thought they were produced in a professional environment. Kudos to those craftsmen

[@buellb0y]

“Craftsmen” 🙄

[@troncat8490]

@@buellb0y they are doing what they can to work, thats enough

[@hitman9198]

@Buildin' Whatever what else are they? Gardener's

[@ev6558]

​@@troncat8490 Lmao selling fake parts isn't an honest living. Something I'm guessing you don't know much about anyway.

[@troncat8490]

@@ev6558 bro I don't care

[@Sana_aga]

вот где производят оригинал выхлоп сузуки))))

[@ivasatosato6085]

COM CERTEZA,ORIGINAL DE FÁBRICA.

[@НурикСыдыков-к5ж]

падаригоннал😀

[@CEPXOH]

Таким способом весь Сузуки так собирают

[@user_who_user]

И походу ещё фобос, bosal, febest)))

[@Shagnasty]

I have always wondered how they were made. Thank you so much for sharing this video.

[@patrickvanden8322]

1:25 They used the nicest steel plate they could find for these "Suzuki" mufflers 😀 Shame nobody told them that welding zinc plated steel gives of even more harmful fumes.

[@ln8312]

Your doctors are telling you so much.

[@squidreuel]

Welding that crap isn't good, used to make me sick, a glass of milk would help relieve the symptoms.

[@patverum9051]

We had to come back on saturday on triple time to weld galvanised grates, the white smoke would upset your lungs even with a good mask. Health and safety unknown in the sixties...

[@turboconqueringmegaeagle9006]

It's hot dip galv ie. The heavier stuff that'll mess you up, pretty common to get sheet specifically for body repair with a thin flash plating.

[@117lyka]

Молодцы кустарщина, я работал на такой работе, я из 🇷🇺

[@117lyka]

@Напалеон Бонапарт это они скорее из СССР 😁наши пацаны живущие иллюзиями Индии

[@ОлегШиршиков-ж2м]

Полуавтомат!! Офигеть .. думал что у них инверторов то и нет , только олдовые трансформаторные сварочники .. ну так и то tig сварки дойдут !

[@STARYI_MARAZMATIK]

судя по тому как он прожигает насквозь метал 13.30 !до tig ему ой как далеко !

[@k26MaxPayne_]

Настоящее японское качество зато :) suzuki

[@ЕвгенийСердюков-т9э]

Насколько я знаю с этих бочек и авто китайские делают

[@onryboy2264]

Next time you go to "trash talk aftermarket parts" just remember this video and the working environment that they are in. Have a wonderful week Mr. Ivan.

[@juliozunigamora2329]

Que admiración por estos obreros, insignes peritos y maestros en su oficio. Qué respeto por la fecunda ardua labor. Motivante e inspirador. Saludo cordial y respetuoso desde Costa Rica. Viva la vida y amar lo que uno hace con mucha pasión. ☕🤝

[@aquillesanhaw3388]

Pakistan's are great and excellent in manual manufacturing👍👍 I'm 🇵🇭

[@Shah_zek]

Appreciate ur comment dear... it's what they r producing in limited resources... mostly jobs r done manually, n no doubt as they r very well trained n expert in their job... but safety n health, both r serious concerns (IMO) I have had many Filipino friends here in Kuala lumpur Actually peoples r not that rich n developed to obtain such High Tech fo the things which still thy can produce manually n thy r doing g so haha

[@luisramos2014]

Soldar a fio solda -se de de tŕas para a frente para o gaze limpar

[@ОлегШиршиков-ж2м]

Надо у них вазовские глушители заказать.. то что продают у нас вообще на ваз не подходит , особенно штаны ..

[@old_falc]

А есть уверенность, что эти подойдут? Глушитель из ржавой бочки.

[@pacotankista1603]

В Болгарии делали и за ВАЗ и Москвич

[@ПроПропро-ж8м]

Глушитель как и прочие предметы, делятся на три категории дорого, среднее и дешман. Дорого, это основном на заказ, частично бренд, среднее - частично бренд и оригинал и дешман это все остальное.

[@joaobatistadarosa7357]

Meu Deus do céu ! Quanta precariedade de mão de obra dessa empresa metalúrgica , colocando em risco de acidente essas pessoas . Cadê a segurança do trabalho desse povo , cadê os EPIs : luvas , calçados protetor auricular, óculos de segurança ? Trabalhar nessas condições causa um stress emocional muito grande , por causa do barulho constante e excessivo . Estamos na era da tecnologia , com automação industrial , robótica, etc etc. Apesar do vídeo ser muito interessante, mostra muitos riscos de acidentes

[@joseantoniocavallieri272]

Só falou verdades amigo eu sou metalúrgico aposentado eu sempre trabalhei como ferramenteiro em grandes montadoras de veículos com todos recursos de seguranças e nesmo assim vês em quando a gente via um acidente imaginem só essa situação aí meu Deus fiquei horrorizado só de assistir esse vídeo condições bem precária.

[@SidorovPetr]

A friend, a real milling cutter knows the safety rules of working on a milling machine like all his three fingers.

[@chestermakgomery]

@@SidorovPetr nu chto zalupa putincka, prisol posmotret k kakim usloviam raboti tebe privikat? 🤣🤣🤣

[@osvaldo9323]

Suzuki ahí tenés la a repuesta

[@tonymazz9912]

This was the way we made things in America 100 years ago. In time, We lost that craftsmanship by technology and ours cars fell apart. Henry Ford car manufacturing was similar to this, hands on with pride. "Our quality is job #1". Those cars were built like tanks and lasted, unlike the cars today. I want to sincerely thank all the workers, that make parts with that same pride..Quality not quantity. All Blessings, respect to them and there families 🙏.

[@bykvskijjevgenijj]

Где ваши технологии ?.теперь технологии это когда автомобиль 150 000 км проедет ?

[@KosmoGoat]

Yea right, they were surely much better than today's cars. A fire hazard without seat belts, windshields made of regular glass, no crumple zone, terrible fuel efficiency, no power steering and with a top speed of what, 40 mph?

[@FACE-PROFILERZ]

Here in US we have similar products we do as above. As US standard for safety regulations from head to toes: ● Safety glasses ● Face mask/respirators ● Gloves ● Arm sleeves ● Apron ● Safety shoes Above videos was an inspiration to would-be who demands more salary increase, think about them!

[@snoopy5736]

Thats why nothing is made here anymore, too expensive

[@memyselfandi3925]

@@snoopy5736 you pay for better quality not ppe! 🤦

[@willysnowman]

CNC u f'ing trumptard

[@sswcustomsewing4276]

@@snoopy5736 Getting someone who will actually show up on time, work a full 8 or 10 hour shift, leave on time, and be a good reliable employee is almost impossible in the USA sadly. Too many spoiled people who ask their phones or attorneys for everything its an embarrassment.

[@snoopy5736]

@@sswcustomsewing4276 Only a few of us left

[@greateusr3971]

कार के सैलेंसर की ढोलकी आज पहली बार मशीन के जरिए बनते देखी बहुत अच्छा लगा बहुत मैहनत है भाई 🤙👍👌🤟👏👏👏

[@ricardodelimaporto741]

Fantástico, muito bom o trabalho de vocês, estão de parabéns todos vocês. Que trabalho muito bem feito 👏👏👏

[@silviosilva1137]

Muito bem e sem nenhuma segurança, verdadeira pirataria que estão inundando os países que cobram segurança das empresas de seus países mas deixam importar essas peças piratas talvez eu e vc estejamos consumindo isto sem saber aqui no Brasil.

[@shvejkjosef6141]

Высокие японские технологии и современная техника безопасности на производстве. Ну и прибыль автопроизводителя при нищенских зарплатах рабочих.

[@popermen694]

I think it’s a knock off.

[@sobreescritura7816]

Es obvio que no son repuestos originales, así trabajan en la India. Cualquiera nota la falta de seguridad para los trabajadores ( también hay niños) pero ellos asumen sin lamentos. Espero que pronto tengan las medidas de seguridad adecuadas y también un salario digno de su trabajo.

[@СлаваНагаев-ю4й]

Жаловаться, скулить долой, работа в перед. Молодцы, супер.

[@ismailhotel4038]

زبردست جناب 💪♥️🇵🇰🇵🇰🇵🇰

[@search2learn776]

lords of recycling. greetings 💪👏

[@n1rbd]

Did anyone else notice the Hazmat Class 6 sticker at 8:55? Class 6 is Toxic and infectious substances. Got to wonder where they get their materials from.

[@Shah_zek]

It leave me a Huge Question Mark I wonder how they get this Class 6 material fo Exhaust products 😳🧐🧐

[@patrickvanden8322]

@@Shah_zek It is not that difficult, as seen in the begining of this video they are recycling steel drums of all kinds and colours seemingly also that had Class 6 material in it. I do hope they are empty when they arrive, but also paints on these steel drums is harmful.

[@Shah_zek]

@@patrickvanden8322 yeah, I hope so if the things arrived empty n no harmful substances stick to them... for me, the word, "Low Cost/Cut Cost" can absorb so many possible Negative impacts

[@shakilahmad4075]

So what is being exhausted thru it is not hazardous at all like co, co2 and solid carbons plus long list of toxic gases and fumes. Industry means pollution and their is no escape how much u try to label it with so called EPA, EHS, OSHA or UL label. These accreditation agencies are meant to make money not to control real pollution. These workers r not responsible for global warming, ozone layer destruction and pollution BUT all those industries who have achieved the QA certificate of "Enviornment Friendly" accreditation. Go back some 15yrs ago where VW was penalized for going against envr'ment pollution ans safety instead of fact that company got certification.

[@ALSomthin]

These guys are doing this with everything they have in conditions that are not the best. I'm certain they are proud of what they do I hope they get paid properly.

[@gurudevelpr]

Yea, and with equipment that has no safety guards. They need OSHA?

[@krishanlalmehta6964]

CffffCffffZzzzlxxlzpzpf#%zfffzzzdz*draw aqaA

[@San-881]

Их используют как рабов , нет защиты рук,тела,лица.

[@redsable6119]

@@gurudevelpr No safety gear weeds out the stupid ones early.

[@alexandermineros1112]

The only problem is they are using the suzuki brand so the will be punished for it

[@fernandogtz.776]

impresionado de la labor de obreros que con lo mas elemental mantienen una producción en serie eficiente y rentable gracias

[@kombikaramujaninja5426]

Parabéns aos profissionais envolvidos! 👏👏👏👏👏

[@mikem5043]

These guys will be the ones getting everything going again after the apocalypse.

[@jonathankaufold7503]

I agree with you a hundred percent.

[@edmundoboyd9852]

😂

[@horstmuller7512]

Yes, they don't need the great reset. They never left stoneage.

[@fredsomrenato2216]

@@edmundoboyd9852

[@iraso10]

Eles serão os caras que irão reinventar a nasa

[@BrunoSantos-qy3wu]

Too much work , very good job 👍👍

[@jugojanggu1269]

great and skillfully, congrats for your job man👍👍👍 from🇲🇾

[@techtry1]

Silencer bante dekha 🤗 Waah Waah kya baat hai ji

[@ДмитрийМарципанов]

Красавцы все от резчика до упаковщика, колоритные, уверенные. На тапочки среди железяк, только больно смотреть !

[@ЮрийПопов-д8ъ]

Работайте пока за нас ,ребята 🤞😜👍🖐️🙏🌿

[@ВасяЧапаев-й4ч]

В соседнем цехе катализаторы клепают из старых мочалок.🤐

[@les2599]

Дружище,я тоже так же подумал👍🤝🏻

[@les2599]

Неее,из волсни кокосовых орехов🤦‍♂️🤣🤣🤣

[@edwinllanos8976]

Felicitaciones hacen un muy buen trabajo esos mofles son eternos. Saludos desde Cartagena Colombia

[@이승재-t4f]

ㅡㅡㅡㅡㄷ ㄷ ㄷ.

[@jorjeperez3728]

Mi admiración hacia su trabajo. 👌.

[@zhalberd]

If Adam Smith had a smartphone, he would be watching this channel all day.

[@walterwright7896]

We hadn't worked like that for years . They recycle 55 gallon steel drums to make mufflers.

[@FirstnameLastname-pe5ib]

I wanna buy one for my car, just to pay respect. These are real men.

[@guilhermevaz4389]

@@FirstnameLastname-pe5ib Somente por trabalhar.Pelo geito não existe legislação que regulamente riscos de acidente.Tanto quina quanto a EPIs.

[@RollingRoadEFI]

@@FirstnameLastname-pe5ib LOL

[@akhtarhussain3263]

Hard worker with hard work

[@frankbiz]

Very nice especially the inside metal already started to rust. Other than that, very impressive. 👍🏻

[@appasahebparamane4810]

Very skillfully made I. am. proud of team work.

[@nicnic1434]

Спасибо за видеоролик

[@alatberat233]

Saya hadir meyaksikan.cara membuat besi sobat ku.salam sukses selalu sobat.salam dari Aceh Indonesia

[@richardluce775]

Now we know where knock off Suzuki mufflers come from👍

[@azumi-osaki]

that hurts my heart and my genetic soul )' :

[@rasitochannel1855]

Terimakasih ini luar biasa😍👍👍👍

[@Shah_zek]

Sama' mas 🙏🏼😊

[@frankgaletzka8477]

Absolut großartig. Sie sind stolz auf ihre Arbeit und ihr Produkt. Was will man mehr .

[@horstmuller7512]

Warum sollte jemand darauf stolz sein, den ganzen Tag Schrott-Bleche zu biegen und zu schweißen? Eine absolut stupide Arbeit, die keinerlei Geistesleistung erfordert.

[@frankgaletzka8477]

@@horstmuller7512 Herr Müller offensichtlich haben Sie in Ihrem Leben einige Defizite was die händische Arbeit angeht . Gleichzeitig sind sie nicht in der Lage die Situation und Lage der Menschen dort zu erfassen. Sie sitzen auf einem sehr hohen Ross. Aber denken Sie daran wer hoch sitzt fällt tief. Ich wünsche Ihnen ein erfolgreichen Tag und eine glückliche Zeit Frank Galetzka

[@horstmuller7512]

@@frankgaletzka8477 Alles relativ. Ich gehe jede Wette ein, dass diese pakistanischen Handwerksbetriebe jährlich eine Kleinstadt entvölkern und ebenfalls jedes Jahr ein Heer an hand- und fußlosen, dafür aber blinden Bettlern produzieren.

[@24VBMWPower]

They welded some holes through the hull - good work 😄

[@donsurlylyte]

i noticed that

[@HokageRorr555]

Semangat para pekerja keras salam dari Indonesia URAAAAAAA

[@gerardomata6461]

muy buen trabajo . maestros.soy de México.un trabajo artesanal.

[@СерыйВолк-й6и]

Молодцы индийцы! Приспособились и никто их не тераризирует!

[@НиколайКравцов-ж9ю]

Сделано в Японии 🤣🤣а то что прожëг , и так пройдет👍

[@TKI.TaIWAN.82.]

Pembuatanya mantap,👍👍👍👍

[@johnj4130]

Am I mistaken, they are using old oil drums to make exhaust mufflers.

[@tomlongmore8029]

Saves money helps the environment 😂

[@kbschulze]

Using anything they can get their hands on.

[@user-psk]

Вот за что вы платите, покупая не оригинальные запчасти) Важный нюанс! Если подобрать хороший материал, то можно сделать вполне конкурентную продукцию. А так этот глушитель на два года, не больше.

[@УасяПупкин-х3к]

Это точно.

[@gjgjd5920]

Я себе сам с нержавейки сварил, он теперь у меня практически вечный. А то до этого три года и он уже в дырках.

[@user-psk]

@@gjgjd5920 хороший знакомый ставил какой-то с добавлением алюминия. Внутри все сгнило - прямоток, а сам глушитель как новый. Я вот тоже поставил, года три назад. Штаны - дешёвка с рынка. Резонатор - типа оригинал, который не фига не встал, чуть залез. И этот чудо глушитель. Пока полет нормальный)) Видел мужики на классику ставили, обернутый в тракторный.... Я кнч хз, хорошо ли это. Прибавка к весу.... Внутренности то остались родные.... Очень интересно сколько проходит глушитель из нержавейки....

[@gjgjd5920]

@@user-psk У меня то ещё родной с японии стоял, потом он раз прогорел, поставил заплатку, через три года прогорел с торца, стал прямоток. ))) Пришлось его разрезать, взять родные потроха и сварить новый из колбы от титана, теперь он снаружи с нержавейки и прибавил весе раза в два. Для грузовика это не критично, единственное что я старые подвесы из транспортерки не поменял на усиленные, они потом оборвались и глушитель оборвал гофру под своим весом.

[@user-psk]

@@gjgjd5920 что за грузовик?

[@АлексНэш-р5г]

Конечно не Сузуки, :) но все равно молодцы. У нас так не умеют, мы только пьем и обсираем других, а работать не умеем

[@ax4878]

да к сожалению насодили вам эту гадость под названием водка прямо с детства, а сколько у вас умных и толковых людей сколько станков да жаль что так

[@favoritforever]

Я долго искал слесаря без пальцев на руке, или ноге... Но не нашёл. А сварщики в это вообще нечто... Короче большой привет Сузуки! Мля

[@babaikaizxisgini1146]

/без перчаток и в шлёпанцах/ респект

[@cheddarcarr720]

i love the way there doing it old-school

[@robertmcspadden1791]

Excellent fabrication!!👍👍

[@wandersonmartins9675]

Muito bom trabalho. Mas falta E.P.I PARA OS TRABALHADORES

[@mohammadmursalin6817]

I have seen the exact same manufacturing method for exhausts, metal buckets and containers In Bangladesh. In fact condensed milk tinned cans used to be manufactured like this. But here is the issue; after you sprinkle rain water in these metals a couple of times, they rust like pure iron sprayed with bleach and brine.

[@dennisneo1608]

Then it's a good thing it doesn't rain under cars.

[@KostadinDelizhanski]

​@@dennisneo1608 condensation in the exhaust system gets care of rust forming, you can bet on that

[@mohammadmursalin6817]

@@dennisneo1608 No, but water from the road after a rain does get in there.

[@edwardarruda7215]

Ya see that little kid? Hard working people.

[@robinbanks610]

Hard workers, great skills❤️

[@275TOYOTA]

This is very nice very great job great video👍👏🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹

[@thepubliceye]

Notice that all the mufflers in production are made of scrap metal, only the two mufflers made for this video were at least galvanized, my guess is most they make are painted scrap metal.

[@Knight_of_NI]

Great video, as always! FYI: I believe you misspelled "silencer" in the video's title.

[@re-fix9678]

Good video🇰🇭

[@paulopires7265]

Métodos muito arcaicos. Devem ganhar muito pouco pra trabalhar. Sem contar a falta de segurança.

[@armusc757]

An OSHA nightmare. Good on the men for being industrious and hardworking.

[@MHDkids]

Woww....ini sungguh luar biasa sekali... keren sekali.. menambah pengetahuan

[@ajititanium]

Good looking at out side but full corrosion inside parts

[@hasanhabib9948]

Using substandard materials and charging full price. The owners make nice profits while paying very little to workers. Also look at inhuman working conditions.

[@robbytrebor8939]

in what country is this? very resourceful! and hard working.

[@Shah_zek]

Actually it's in Pakistan 🇵🇰 Sir

[@stevengegar9709]

GREAT JOB ON THE PRODUCT AND ESPECIALLY THE WHOLE PROCESS , OF MAKING THE PRODUCT STEP BY STEP ! ! ! ! ! MORE PLEASE

[@wonderingskills1]

Hamza and Mehboob Sahib kindly is video ki location mil sakti hai?

[@pradith1]

Me gusta ver videos donde se muestran lis procesos de fabricación pero me doy cuenta las precarias condiciones en las que trabajan, sin elementos de seguridad ni protección, con maquinarias en dudosas condición técnicas y me pregunto sobre las horas de trabajo que cumplen y sus salarios

[@pedrofernandez8893]

Muchas felicidades por su trabajo y muy trabajadores 👍

[@miguelgonzalez9966]

Felicidad ? Por las condiciones en que trabajan, el único feliz es el o los dueños. Porque? No veo zapatos de seguridad , no veo guantes, no veo ropa adecuada, no veo protectores faciales. Esto va a pasar en Argentina , si gana el neoliberalismo. Pinza pueblo.

[@gustavostellardi1170]

@@miguelgonzalez9966 Lo que sería muy bueno para la Argentina es que los dirigentes sindicales argentinos trabajaran una temporadita en esta fábrica. Así éstos trabajadores verían cómo otros de su misma clase social pueden llegar en autos de alta gama y acompañados por guardaespaldas, veranear en Miami o Punta del Este, usar relojes caros, vestir las mejores pilchas, y ser dueños de empresas. Entonces éstos pobres asiáticos dirían..."¡Qué país maravilloso el de ustedes. Cómo se ve que no es neoliberal...!!!!!!

[@geraldolara3695]

Pessoal fiquei impressionado com o trabalho de vcs,, é quase tudo feito a mão!! Vcs usam as máquinas só pra cortar as peças é genial,.meus parabéns 👏👏👏👍👍👍🇧🇷🇧🇷

[@ozmalo]

Why most works are gone on the ground work benches would be a big help

[@PyrosPelagics]

Give these hard working men some actual workspace with separate storage warehousing.

[@williegillie5712]

Nice Suzuki Stamp Suzuki is one of my favorite ATVs

[@Myledailuon79]

Chào bạn mình cũng làm về máy CNC bạn chia sẻ rất là hay

[@WW-by2cs]

Фактически из такого металла на пару месяцев

[@gjgjd5920]

У них ходить будет намного дольше, климаты разные.

[@amilcardeleont.4825]

Sorprendente, que de maquinaria vieja y descuidada, métodos de trabajo arcaicos, inseguridad al máximo, sin planeacion adecuada en los procesos y materia prima de desechos, fabriquen esta parte automotriz. Claro que la calidad del producto no es para equipo original si no para el mercado libre de refacciones, donde las especificaciones de ingeniería no importan con tal de que coincidan los puntos de su montaje y que salga el humo de la combustión del motor.

[@WBT714]

Great job guys 👏👏👏👏

[@Visualinoxcanal]

Mais um inscrito aqui do Brasil.

[@JuanChavez-st5ox]

Los felicito, magnífico trabajó y un gran talento el qué todas estás, personas, poseen👏👏👏 son maestros en la materia 💯👌 y todos trabajan en buen ritmo y en cordinacion.. Saludos y bendiciones 🙏🙏🙏😇 Desde La Paz baja California Sur., México 🇲🇽🙋👍

[@litvinjeka]

Что то я пропустил как крашенное железо из бочки превратилось в оцинковку или нержавейку.

[@waseemgulshaikh1730]

Nice information ℹ️ 👍

[@divedeeperer]

Von Sicherheitsschutz haben die da noch nie was gehört 👀

[@Aldebaran2509]

Von Kinderarbeit haben die auch NOCH NIE etwas gehört. Schaust du mal bei 01:00 genau hin.

[@zulnoon78]

Ma Sha Allah, great job !

[@bonpacatang6009]

These are hard workers and they are entitled for better pay and better conditions. There are plenty improvements needed for this factory and too many tripping hazards, have a safe working environment. You need health and safety officials. Good luck.

[@anilarora4868]

Very impresive prodn.✌️👌👏

[@huule4103]

Fantastic! Where are you?

[@joeblogs5163]

Here's me trying to find some 5/8" galvanised steel tube in the UK, not a chance 😂😂😂😂😂

[@claytonsimplot9554]

At least 12 people ,sheet metal ,pipe ,all the machinery ,building and electricity to make the mufflers . How much do you think they are sold at ?

[@yamahajapan5351]

Highly skilled Pakistani workers only male about $2,000 usd per year. These folks probably earn much less

[@KATEKNIK001]

visit my channel too friends, there are interesting things too

[@Shah_zek]

@@yamahajapan5351 well, kinda agree wit ur statement but now a days its more o less $3.0k per annum, that's fo the guys who r doing some simple works But if v gonna ask experienced peoples, their salaries vary from $4.0-5.0K Like u saw a old man there, more likely he was some manager o senior supervisor status guy, he earn more

[@Shah_zek]

Still very cheap if v gonna compare wit genuine company assembled parts hehe Lab is cheap than Mostly jobs been done manually n no high tech expensive bending cutting welding machines acquired to let this job done Yeah, most expensive thing is, Electricity in that part o land...

[@HokageRorr555]

@@yamahajapan5351 sama seperti di Indonesia 🇲🇨

[@Eminencebr]

Legal, porém imagino que deve ter um alto índice de acidentes, pois ninguém usa nenhum EPI de proteção,nem ao menos luvas de proteção.

[@turboconqueringmegaeagle9006]

Is that lap joint even gas tight? Or is the heat shield there to hide the leaks?

[@fredmcalister7345]

-Перчатки? -Неэ, не слышал.