I Finally Got A Scan Tool!! | Ancel FX9000 Review | Mechanic Mindset

[@TRKGL1800]

I just received my fx9000 today. turned it on and went thru all the updates. tested on a chevrolet equinox with all kinds of issues and it picked up a lot of fault codes I was surprised at how easy it was to use. I even sent myself a report via email which allowed me to see all the codes and then research what they were from my home computer. I am using the Chevrolet Equinox as a learning tool. Thanks for your video. And I hope to see more about the FX9000 soon

[@MechanicMindset]

This is great to hear! It really is a good tool for the money 👍. For sure, we will be including this tool in future videos! Thanks

[@edmekaniko5334]

hello sir, i also have ancel fx9000, but i cant be updated, do i have to register the serial # ? and how?

[@MechanicMindset]

Check our latest ThinkTool Mini Bi-Directional Scanner Review! kzbin.info/www/bejne/m3yuhGpmo79-pKc

[@taspats2608]

Hi. What tool yuo could advise for BMW F10 scan, reset and coding. Many thanks

[@MechanicMindset]

For cheap, check out the ThinkTool Mini review video. I was impressed with the premium software for BMW. Although, if paying your bills relies on this feature, just go for AOS from BMW 👍

[@gregorypotter]

I like your videos I purchased the same tool and tried using it for my 2016 Rangerover sport L494 .. I tried to calibrate the ride height suspension and wasn’t able to do it . If you can make a video it will be much appreciated thanks

[@Byzmax]

good video. Please do an in depth review of the reset functions and ant bi directional functions.

[@keatonperry6912]

Hi love your video relly does help me with my level 3 qualification. Could u maybe look at doing more diagnostic videos cheers and keep up the good work

[@MechanicMindset]

Glad it has helped you! Sure, I will be doing more diagnostic videos in the future. What brand do you work for?

[@edmekaniko5334]

hi sir, is this scan tool can use without enternet

[@MechanicMindset]

Yes you can, you need internet for updates 👍

[@MsCarService1986]

I've had one of this scanner type, Launch CRP909, is the same with this one. From my experience I can say that is a basic obd scanner, no coding, no active test components, only few special functions but is ok for entry level.

[@MechanicMindset]

I can see some traces of ‘Launch’ in this software too. I think they may be affiliated. For sure, the coding and component activation are great features but seem to come at an extra price! What are you using now?

[@MsCarService1986]

@@MechanicMindset Now I have the Launch x431 pro mini S since November last year and I can say that this tool is to another level compared to crp909 model.

[@MechanicMindset]

@@MsCarService1986 Nice! Just had a look. Good features. What’s the annual update cost?

[@MsCarService1986]

@@MechanicMindset I have 2 years of free updates and after that I think it cost 499 USD per year, as I remember. The advantage is that you can still use your device without paying another annual update after these 2 years.

[@MechanicMindset]

@@MsCarService1986 ah ok, quite expensive but if you use it a lot then it’s worth it! Same for this one, you can use it without updates or subscription 👍

[@grahambrown3718]

Great review Darren ☺️ it looks like a really easy to use tool that gives you results with minimum user inputs.

[@MechanicMindset]

Cheers Graham! Yeah I was pretty impressed how quickly and easily I could get codes and read parameters. The graphing function is good to. What tool are you using?👍

[@grahambrown3718]

@@MechanicMindset I have a couple of handheld diagnostic tools that I use. Neither are as comprehensive as the one you have reviewed. For very quick engine diagnostics I use the Ancel AD310 (£35 from Amazon). It connects with the vehicle in 10 seconds, reads codes, gives I/M readiness, and allows you to read a variety of Parameter Identifiers. Quick and easy to use. For ABS and RCM faults I use a Foxwell 650 elite. It’s okay, a bit of a hit or a miss what vehicles it works with. That said you get regular notifications from Foxwell on updates and it’s pretty easy to do.

[@MechanicMindset]

@@grahambrown3718 Cool, got to go with what works for you. I have an ELM327 $10 dongle that reads all the OBD codes; not a bad tool if you know how to read codes etc! I just keep it in my car and get it out whenever I need it. I would recommend it for dealer techs who have to wait in the queue for diagnostics but just want to clear codes after a repair! 👍

[@richardmartini9784]

Can it tell actual miles from PMC....? A lot of people are clocking the cluster...

[@MechanicMindset]

I would have to check - it may be possible too read the mileage from other control units too. I know a lot of the better mileage correction tools change it in all modules. Otherwise a conflict will be recorded and a fault code stored.

[@jackp8363]

good review, the problem about these product is the operating system like this one using android 7.1 which is at the end of is supported life the tool may work great until you try hooking to the internet just like a computer with windows XP, found this out the hard way.

[@MechanicMindset]

Ah ok, thanks for the information. I will see how it performs. Hopefully it’s good enough to just Google fault codes etc. The software update download was no problem. Do you have the same tool? Thanks for the comment 👍

[@jackp8363]

@@MechanicMindset no i bought a foxwell i 70 it wouldn't connect to the internet giving an error message after several try I decided to power it off but when I tried to power on again it would be on a cycle on for a sec then off couldn't do nothing with it after that I know this was a defective unit that happen but when i lookup up the os was at the end of it service life that don't help either the tool in itself probably work fine with this old os but trying to go online may give serious problems, thanks for your good work

[@عدنانحمدوني-ط2ض]

Does this device work for Korean and Japanese cars

[@عدنانحمدوني-ط2ض]

Please does this device work diesel cars

[@MechanicMindset]

Hi, yes. Check out my latest video for the ThinkTool Mini. Only $20 more and much more functions. Use my link and discount 👍

[@billytremoloband7456]

Hi Darren, that looks like a handy bit of kit, harmless money too! If you get a chance at some stage try have a play with on of the autel scanners, I’d like to hear your opinion on them compared to the oem systems!

[@MechanicMindset]

I see a lot of people using the Autel gear. Few different levels too at different price points (suppose they are all doing similar things). What are you using?

[@billytremoloband7456]

Mechanic Mindset I spent years using either some form or another of snap on scanner or launch , I got one of the autel 908mk’s a few months ago and as predicted by my friend (another mechanic buddy) with the whole Murphy’s law that once I got the scanner I probably end up slinging engines around the place....!😜 He was dead right haven’t used it a hand full of times but it seems to be decent enough! Having great fun on a daily basis with Sdd and pathfinder though!

[@alfredosuarezalonso9461]

Hi, Thank you for your videos, can you tell me what scanner you think is better? Launch x431V or Ancel DS700,? Thankyou..

[@MechanicMindset]

Sorry, not sure. I’ve not tried either.

[@Lambros_Stefaneas]

Thanks for the video. This product, you can see it all around the internet world, but so far, at least for me, I saw it for the first time someone using and how looks like the menu and etc. I have seen the Autel 'live ' on my hand, but never this one , always wanted to know more about it.

[@MechanicMindset]

I am quite impressed for the basic functions. I will use it more in the future too and see how it performs for real jobs. I think it will do good for diagnostics 👍. Do you own Autel?

[@Lambros_Stefaneas]

@@MechanicMindset No.Two of my work mates own. 1 has the MK 808 cost him 900$,and the other one has the next level of the mk 808(I can't remember now the model)cost him around 1300$.they're not the hi level scanner from Autel, but we 'test ' them around with different cars, all good until know, very impressed .we have not diagnose very difficult jobs until now,some misifires, brake bleed on the abs unit ,pads on electric parking calipers ,some service resset, live data etc,has a lot thinks, for that money, it's very good. I think that the hi level, will be very very good. I was thinking to buy Autel or the ancel, but the ancel I haven't seen it at all how it's 'working ' ,I own a multidiag pro(very good, but Autel I think is much better),needs laptop to 'run it',and every time I hate it... need something with screen!!!

[@MechanicMindset]

@@Lambros_Stefaneas Ah ok cool. It’s difficult when there is so much to choose from! 👍

[@melkild1134]

where do you get a new sub for the scanner somebody that know where ? please help

[@MechanicMindset]

Any options on the tool? What did they say when emailed them?

[@arthurfricchione8119]

Darren thanks for sharing. Are there bi-directional controls? Guess I should go and read up on it. But all your info and videos have been spot on. Is it still usable if the subscription expires or do you have to up date the unit? Just a couple of questions I’m sure I’ll have a few more. Stay well and safe Artie 😊

[@MechanicMindset]

Hi, I think the bi directional capability is limited and doesn’t have the full features like power window actuation. It did say there were some component activations for OBD feature but not tried yet. When the subscription expires, this unit will continue to operate on the software it has installed; not restricted. Cheers Artie!

[@pauldarby1815]

Will this tool do air suspension calibration on Range Rover L322 2002-2005 & 2006 onwards

[@MechanicMindset]

Sorry, I’m not sure. It might be best to contact Ancel directly 👍

[@jonathanevans2677]

Yes I'm usesing the launch/c reader Pro 909x just would like to see if you can do more in depth videos on the tool, it works well for me dose all the family cars from jag x type and jag xf to vauxhalls many thanks.

[@MechanicMindset]

Ah ok cool. I will do more videos with this tool in the future 👍

[@JarosawTomczak]

Great material😉 Thanks.

[@MechanicMindset]

Gals you enjoyed the video. What scan tool do you have?

[@JarosawTomczak]

@@MechanicMindset Texa Nano. am looking for equipment to support tpms - can you recommend something?

[@sebczajna700]

How it looks compared to Autel or Launch?

[@MechanicMindset]

Hi, I think this tool is very similar to the Launch X431 CRP909. I’ve not used the Autel tools

[@myflorin25]

I use Launch everyday and it looks similar but is cheaper than Launch

[@MechanicMindset]

@@myflorin25 How do you find the launch tool? I think the software might be similar. I saw an example diagnostic report on this tool and it had the Launch watermark 👍

[@myflorin25]

@@MechanicMindset It is similar easy to use with loads of option for service reset ADAS DPF but it has some issues sometimes I just restart the tablet and it works fine and is better than Autel .

[@MechanicMindset]

@@myflorin25 Great to know thanks!

[@MiracleMAX]

Hey Darren, Looks pretty good for the price. Generic scan tools are getting cheaper and cheaper. The appearance seems a little similar to some of the Snap-On tools & others. Must admit, I am a little spoiled using a GScan 3, but it's great that some cheaper versions are providing a good range of features. Thanks for the review & look forward to you putting it though it's paces in the future! 😉

[@MechanicMindset]

Cheers! It’s a good basic scanner, but if we want to get in to more advanced features, we will have to reach a little further in to the pocket like you 😁👍

[@alexmessina3383]

It looks like this tool has OBD2 side diagnostics of course, but it's not clear how much Enhanced Manufacturer Data is also available, and whether it can print wirelessly, and whether the tool itself is wired or wireless ... In my case, many of these tools don't cover Australian built Fords and GM (Holdens) ... haven't been able to determine yet whether this tool will do that.

[@mohamadsweed4987]

Hello. What concerns me about this device is whether it detects hybrid system problems and damaged hybrid batteries. Thank you

[@MechanicMindset]

Good question! What brand and model are you working on most?

[@mohamadsweed4987]

@@MechanicMindset Toyota Prius and all Toyota Hybrid Honda Civic Thanks

[@MechanicMindset]

@@mohamadsweed4987 I would think the tool will diagnose these vehicles; they have been out for many years and this tool has Asian software. I will see if I can find out for sure! 👍

[@mohamadsweed4987]

@@MechanicMindset I thank you very much because you are interested in the topic. I will wait for your response. Thank you🌷🌷

[@dionisioincognito4469]

Is that scan tool advised to use all Asian car like in the Philippines

[@MechanicMindset]

I think it covers a lot of Asian cars; did you check the website? 👍

[@edmekaniko5334]

good day to you sir, what could be the problem of my ancel fx9000, its says on screen, the divece serial number is abnormal, in everytime i tried to update it, pls and tnks

[@MechanicMindset]

Hi, it is best to contact Ancel and they can help

[@edmekaniko5334]

@@MechanicMindset tnks for susgestioñ sir

[@alrifainidal]

great video my friend . thanks for sharing this tool with us . does it has Functional Tests to activate and deactivate for example fuel pump, VVT ?

[@MechanicMindset]

Cheers! It’s not full bi directional, but the description said it could do some component activations in the OBD section of the tool. Not tried yet 👍

[@alrifainidal]

cheers Mate

[@wdtony6242]

@@MechanicMindset If you haven’t, I would advise actuating the fuel pump or any other actuators. It would be helpful to know the exact parameters of bidirectional capability. Thank you for the video.

[@MechanicMindset]

@@wdtony6242 I’ll check it put when I get a minute 👍

[@wdtony6242]

@@MechanicMindset I appreciate that. Thank you. I haven’t found any information about these specific functions anywhere yet.

[@yakhunt9424]

You need to update the Amazon links for the Pico and the Hantek lead, both say 'Currently Unavailable'. I'd rather purchase where you make something from it

[@MechanicMindset]

Thanks for updating me! I will check them out. Was that for UK or USA links? So hard to keep on top of them. Cheers 👍

[@MechanicMindset]

Also, if you click a link, we get a commission for anything you buy after that. So if it’s out of stock and there is another similar recommended, we still get a bit of commission. Thanks so much for the support!

[@yakhunt9424]

@@MechanicMindset It was the UK links, but now I know that clicking though from there works I can go ahead

[@MechanicMindset]

@@yakhunt9424 Cheers!

[@yakhunt9424]

@@MechanicMindset The PICO looks to be out of stock everywhere now :-( Annoying, just need to check the output from an MX5 gauge cluster to the cruise control to see if it's a conditioned output from a VR VSS input and suitable to feed into an aftermarket ECU. Reckon I should wait or would a cheap handheld suffice for now?

[@iankelly2110]

Handy little unit very keenly priced Darren

[@MechanicMindset]

I was surprised how responsive it was. I’ll be honest; I’m new to the world of aftermarket scanners!

[@iankelly2110]

@@MechanicMindset the fact it has Bi directional control is good for the price.

[@MechanicMindset]

@@iankelly2110 I am not sure it’s full bi directional (like component activation etc), but all the basic calibration features are there 👍

[@stephanevaucelles6378]

thank you for the video, very interesting tool

[@MechanicMindset]

Cheers Stepane, I was pleased with the results. What do you use for the big trucks?

[@stephanevaucelles6378]

@@MechanicMindset We are renault trucks concessionaire and for other brand we use delphi 2014 without subscription

[@jasonjerusalem7000]

Is this scanner has tps relearn sir?

[@MechanicMindset]

Hi, yes in the reset menu it has TPMS option 👍

[@ludhianvi1]

good day everyone... is this the same as launch x431 creader909 ??? looks identical except for the colour. I just ordered my launch from obdzon

[@MechanicMindset]

I asked OBDzone this question and they said that it was different. The FX9000 is newer and the software seems to be different. All quite similar though 👍

[@ludhianvi1]

@@MechanicMindset from price to features to updating price and looks are exact to me. After watching your video I went with launch knowing the brand. I had launch in the past.

[@timothymohammed919]

is it bi directional >???? if so It will me very handy at times

[@MechanicMindset]

Hi, so we have the reset functions, some of which are no directional (like brake pad reset and DPF regen). The website says it can activate components but I haven’t found where to do that yet. Need more time to play! 👍

[@MechanicMindset]

What bi directional features are you interested in?

[@Yotataco04]

@@MechanicMindset I have the autel mx808, I am curious if it does more than that. It can do all the oil resets and brake maintenance modes ect. but it does not do active tests like activating solenoids like purge valve, vent valve, egr ect. I would be interested if it did true bidirectional controls through pids like the higher end scanners.

[@MechanicMindset]

@@Yotataco04 I will have a play and see what I can find. Other people are also interested in full bi directional tools 👍

[@jonathanevans2677]

Hi like your videos keep up the good work there, it's the same machine as the launch /cread Pro 909x I would like to see more video on this tool pls many thanks.

[@the_retired_mechanic]

Priced about the same as a non UK official imported autel (ebay direct from china with no support or updates) which means its a good price machine as has customer support thrown in.👍

[@MechanicMindset]

Ah ok, that’s good to know. They were quite vocal about the after sales support that comes with this purchase. What’s your current weapon of choice?!

[@the_retired_mechanic]

@@MechanicMindset autel 908 official imported. Good all round machine that does more than I need for general use. Can be a bit slow when graphing live data but it was best value at the time. All things are getting cheaper I guess

[@MechanicMindset]

@@the_retired_mechanic Ah ok, Autel are really popular. All technology moves on quite quickly. There will always be something newer, faster and more expensive for us to buy 🤣

[@edmekaniko5334]

hi, can i update ancelfx9000 even with out registration?

[@MechanicMindset]

Sorry, I’m not sure. I think you might have to register

[@edmekaniko5334]

@@MechanicMindset can you teach me how,

[@zafhyre478]

How to order pls?

[@MechanicMindset]

Hi, Link to BUY Ancel FX9000: bit.ly/3oNBi5s Use Code MIND10 for an extra $12.99 discount Mention MINDSET in the notes when ordering for free express delivery!

[@hendersonjp]

Wish you had got X7 due to its big screen . Some say X7 very slow to read , this one seams very fast on the BMW

[@MechanicMindset]

It would be good to give it a try, maybe in a future video! What tool are you using? I was very happy with the speed. Maybe the speed also helped by the hard wire connection. The screen size on this is ok to be fair 👍

[@hendersonjp]

@@MechanicMindset Autel MP8080 , I was looking at the X7 due to the large screen size. But could not find many reviews.

[@Cavalier_Steve]

Dam Darren your spending my money again 😂, Seriously though this looks brilliant and at a very good price, what bi-directional capabilities does this have this is what I’m really looking for in a scan tool. Cheers.

[@MechanicMindset]

Haha, fortunately this tool was on OBDZON! It doesn’t have full bi directional (like power window actuation). It has the basics like service calibrations and procedures. It did say there was component activation in the OBD or I/M menu but I haven’t tried it yet. What tools have you considered?

[@pleple7388]

Ml 250 w166 year 2014 AdBlue

[@d.d4184]

Nice review. Cheap tool and updates. I prefer wireless. I use Launch as my everyday tool. Love it 2 years free updates. Unfortunately the update period is just up, and to renew is nearly the price of a new unit. I would like to try autel but unfortunately they only seem to give one year of updates.

[@MechanicMindset]

Cheers! This is the problem; there is too much choice and can be difficult to fine what works for you best 👍

[@Pmeyer1226]

It’s worth noting to your viewers that this “New” tool uses a Six YEAR OLD version of Android (v7.1), and is not supported by Android security updates. It seems to be common place with a lot of the DIY level devices. I would question the longevity of the device as more money is spent on updates down the road.

[@MechanicMindset]

Good to know thanks. The tech works is moving fast for the automotive OBD tool world at the minute. there seems to be a lots of brands with similar tools and growing capabilities coming in at lower prices. At the time of testing, I was impressed with this tools basic scan/data/service function features for the money 👍

[@dionisioincognito4469]

Some scan tool is not working to the Philippines like asian cars made

[@MechanicMindset]

Sorry I am not sure of all the models it supports. Maybe you can contact OBDZON.com directly and they can advise. They also have a KZbin channel 👍

[@wdtony6242]

This may be a good scanner but it’s disingenuous for Ancel to claim bidirectional status when it clearly does not support that function. This was the only reason I considered purchasing this model.

[@MechanicMindset]

Yes, it's not 'full' bi directional. It does have all the calibration features and there is a feature in the I/M OBD section for component activation but doesn't work on my car.

[@ADDAUTOMOBILESERVICES]

👍

[@UtahDarkHorse]

Although I really like most of the videos put out by this channel, I feel the tool reviews are really just infomercials. I'm guessing because they are sponsored. that's too bad.

[@MechanicMindset]

Hi Mark, yes these are definitely honest reviews of the tools I have been sent. Not ashamed to say that they bring in a tiny bit of revenue for new filming and scope equipment for the channel. Plus they rank well in searches and bring in new viewers. I do turn a lot of offers to review products down as I’m conscious not to do too many and some of it is just not up to standard. Thanks for the feedback 👍

[@qrs3658]

Ancel is b.s with their yearly subscription. There are much better scan tool out there that you don't have to pay subscription fee.

[@MechanicMindset]

Hi, the good thing with this tool is that you dont have to pay and the tool still works. It’s not an expense you want if you dont use it that often, but if you do it’s nice to have the latest vehicles loaded. I dont think it’s that expensive either, most reputable tools have a charge and supports the development required to keep tools that last up to date 👍

[@thecordero8008]

Email?

[@MechanicMindset]

Hi, for me? [e-mail]

[@thecordero8008]

@@MechanicMindset I have sent an email to the address you indicated