How to Replace a Headlight on a 2007 Toyota Yaris

[@recycleman2900]

A very illuminating job, Batman. You keep lighting up the way. 😂

[@LadumaNguyuza]

to the point and very informative. THANK YOU!

[@nathanbennett1711]

I wish all informative videos were this good ! Thanks for doing this.👍

[@MechanicSecrets]

Happy to help. Thanks for the kind words!!!

[@DeFinisLand]

Great video Thank you

[@plan7channel9darned]

Driver side is easy. Passenger side is a nightmare.

[@dr.susanchaudoir8576]

I could not have done this without you! Thank you for making and posting this demonstration. Perfect! 😊🎉

[@MechanicSecrets]

Glad it helped and thanks for letting me know!!!

[@trispycee]

Great! I managed to do this with a little difficulty, but not too difficult!

[@DeFinisLand]

Nice 😊😊😊😊😊

[@CouchMan88]

Its also very easy to remove the front bumper to access the other bulbs in the headlight assembly or more easily replace the headlight bulb. About 10-15 mins max to unbolt he top portion of the bumper, 3 bolts for the headlight assembly. 9003 headlight, 7443 turn signal, 2825 corner marker bulb numbers.

[@robertnagy2456]

Unfortunately, it's not always the bulb that's at fault. As you can see in the picture, the plastic socket cannot withstand the heat load in the long term and melts on the bulb connectors. It's a shame that the manufacturer didn't use a ceramic socket for the halogen bulbs.

[@ceef8688]

I'm about to attempt this on the right side but the mounting seems insanely harder over there. Nowhere to reach!

[@vergotta777Official]

Did you pulled up the bulb?? I’m tryin to remove the clip that supports the bulb on the right passenger side and it’s impossible to me, idk why it is so hard to remove the clip 🤦🏻‍♂️any advice ??

[@ceef8688]

@@vergotta777Official as others said, you'll have to bleed for it. I did, banging my fingers around trying to feel for a clip through a tiny circular hole and a rubber nozzle of some kind. It was months ago, so I don't remember, but it takes some random squeeze and then you'll be set.

[@vergotta777Official]

@@ceef8688 alright at least you did it so it’s not impossible lol appreciate your response man !

[@ceef8688]

@@vergotta777Official right on. For what it is worth, The right side was so ridiculous that I got the new bulb on and in past the rubber seal, but at the end of the day I never felt it click solid the way it was when I started. I worried it would fill with water, or the headlight would fall backward into the engine if I hit a bump... but it has been months, and seems fine just chilling unclicked in the headlight casing.

[@arkadiuszwuttrich1076]

Hm yaris 3 in 2007 interesting :]