How to make a Mini Jet Engine | 3D Printed | DIY with Max Thrust

[@rustie61]

Since you have no combustion occurring, the rear axial turbine wheel then becomes a restriction to pure ambient airflow (no hot gasses to drive the axial wheel). If you remove the rear axial wheel, you will gain thrust from lack of restriction.

[@MechNinja]

My upcoming video is on what you asked for...So subscribe to the channel for more videos....😊😊

[@simplerocketscience6222]

this is obviously just a model and not a engine that is supposed to produce any useful thrust.

[@MechNinja]

It's just a detailed model with all its necessary parts. But I am working on an actual product.

[@MechNinja]

So thanks for watching and don't forget to subscribe 😊😊😊😊

[@atbbengoli6492]

Xv

[@austinsmith9413]

I think it's sort of funny that you went through all this effort to build a "mini jet engines" with all the complete internals of a real one just to power to off an electric motor.

[@maddmavic]

And plastic so would melt if really worked

[@antoninperbosc1532]

yes and no he could print it with filament charged withe metalic powder or send file in order to print it on laser + sintering machine or tig robot ... lot of option Mech ninja do you share stl or catpart / catproduct ? (i am a cat v5 user since a long time ;) )

[@captainheat2314]

@@antoninperbosc1532 3d printed metal cant handle the 100K to 200K RPM these jet engines make

[@ilovemyindia9053]

Please you are contact number

[@ilovemyindia9053]

You are Instagram ID

[@noididntkell6818]

Awesome , perfect teaching tool for simple education, all the combustion chambers are so cool the idea should be shared . This type education has been taken from our youth , TIME FOR CHANGE? Time for accountability in world POLITICS ..... Father in Heaven loves you and so do I !

[@MechNinja]

Thanks for the complements brother....Subscribe the channel for more upcoming videos like this...and also share it. Thank you ....:-)

[@joshhayl7459]

🔵 There are no "Combustion Chambers" in this 'Ducted fan' device.

[@MechNinja]

@@joshhayl7459 yes it's a model... I am working on the combustion one....😊

[@theoneandonlybennett]

Have you measured the thrust that the fan generates? It would be interesting to see what numbers your model outputs!

[@MechNinja]

Bro it's just a model.....but my next video is on a electric ducted fan...So subscribe the channel for more videos.....

[@0623kaboom]

@@MechNinja even a model will have compression ... and knowing what that is will also allow you to check the thermal needs of the turbine blades against pressure heating ... and it will allow you to refine the compressor section to give a better result when you actually desing and build a jet engine and not just assemble a printed copy of an off the shelf engine

[@fabregatalbert6235]

thank you for adding the STL compressor folder

[@Xfelix-ke1yw]

Damn I love your videos!

[@MechNinja]

Thankyou so much... don't forget to subscribe 😊😊😊

[@casper3882]

Wow you are so smart and I love the disine

[@MechNinja]

Thanks....😊😊...And don't forget to subscribe my channel for more videos. And also press the bell icon so that you don't miss any video....😊

[@casper3882]

@@MechNinja I all ready have because I love this stuff

[@yaseenmallick7278]

WOW Jet Engine without fuel pipes, also plastic turbine and combustion chamber, Soo?? basically its a expensive and inefficient fan. isn't it ?

[@MechNinja]

Yeah It's an electric jet engine or we can say a turbo ban. But no, it isn't inefficient.... it's just a one of the beginning prototype of my upcoming projects...😊

[@happygilmore2100]

Fan jet, looks really good though, well done.

[@ferce889]

@@MechNinja It is not a jet engine (aka turbine) because there is no combustion happening with your design. Your design is a Duct fan motor. There is no such thing as an electric jet engine

[@daystocomeofficial2658]

@@ferce889 unless you count the recent studies on using plasma as a propulsion but nothing large scale has been able to have been made yet so we’ll see, I’m sure he has something in mind that would better fit the description of jet engine but right now he’s just testing geometries so of course he’s not gonna waste metal making prototypes and combusting them, and just because it has an electric motor doesn’t mean it can’t be a combustion turbine, all turbine engines have an electric drive motor to pull air through the intake when it starts and once the jet starts producing thrust, it will take over the job of spinning the turbine via the second turbine on the back, so in all ways is this a model for a jet engine, I’m sure he’s just testing geometries before he makes a legit one

[@ferce889]

@@daystocomeofficial2658 That seems to change nothing. I'm being nitpicky but unless there is combustion its just a duct fan right?. That piece of plastic cannot be a combustion motor...at least not for long because it will become destroyed from the heat.....If he had put "Jet engine model" or something then that would be accurate to me

[@antoninperbosc1532]

Congratulation Mech Ninja your mini jet engine is a beautifull work ! (PS i am a Catia V5 user since many years)

[@MechNinja]

Thanks....And make sure to subscribe....as all my previous and upcoming projects will be designed on CATIA too.... 😊😊

[@somyagupta4779]

Great job! Keep up the good work♥️

[@MechNinja]

Thankyou....😊

[@timber1159]

Its a model people. Good job.

[@MechNinja]

Thanks bro..... Checkout the website for more models...themechninja.com/ And don't forget to subscribe the channel...😊

[@RangoliDesigns-jg8mw]

total thrust how how much giving?? 20kg?

[@MechNinja]

No sir it's a model....and 20 kg is too much thrust. We can generate it without internal combustion method...

[@MechNinja]

Thankyou for watching the video and don't forget to subscribe 😊😊😊😊

[@pubgmurali8530]

Brother much thrust you noticed

[@joserolandsancheromero4440]

This is the best job I've seen so far!!, ❤️👌👏👏

[@MechNinja]

Thanks for the complements bro....Subscribe for more videos....Thank you....:-)

[@joserolandsancheromero4440]

@@MechNinja ya me suscribí!! ❤️Cuando vas a poner a prueba esta fabulosa turbina!! 😍👏

[@trillyfan2578]

so how much thrust ? thanks (sorry I don't listen to English well, if it mentioned in the video)

[@MechNinja]

I have not calculated it....😅 Coz the motor I was using was of high kV and there was too much vibrations at 30% throttle. Btw it was a model of an mini turbine engine..... But for thrust generation you can check out my ducted fan videos.....and also subscribe to the channel so that you don't miss out my upcoming videos...😊

[@pavanchandankar7061]

Its really good stuff, Please tell me how much thrust is generated, because i am planning to use it in aircraft.

[@MechNinja]

I have not calculated it....😅 Coz the motor I was using was of high kV and there was too much vibrations at 30% throttle. Btw it was a model of an mini turbine engine, we can't use it in aircraft.......but I am developing one which can be used in aircraft... But for thrust generation you can check out my ducted fan videos.....and also subscribe to the channel so that you don't miss out my upcoming videos...😊

[@pavanchandankar7061]

@@MechNinja thank you for you reply, if possible please share me the turbine which can be used in aircraft, because i am doing my major project on aerodynamics.

[@RandoniumTJ]

Can you please give a link a link for that brushless motor... I can't find that online...

[@MechNinja]

Actually that motor doesn't sold seperately......It is an EDF motor and is generally sold along with EDF.

[@franciscoe.9989]

RESPECT FOR GREAT JOB

[@MechNinja]

Thankyou so much... don't forget to subscribe

[@saikrishnasuresh6261]

This is very interesting, if you calibrate the main rod and add some better bearing for a smooth rotation you will get more efficiency. I suggest you make a video where you 3d print a 12 blade edf and add a afterburner with it. It will have so many practical applications. Anyway this is a amazing video, keep going

[@MechNinja]

Thanks....☺️

[@franciscoe.9989]

Questions Will the brushless motor consume more energy when placed in the turbine than it would if you just use it without the turbine??

[@MechNinja]

Yes definitely the brushless motor will consume more energy in turbine...because in turbine it will have to rotate a big load thus increasing the current consumption... But using a propeller...it will consume less current because of less load

[@franciscoe.9989]

@Mech Ninja great Thanks The propeller with motor (1) produces less energy consumption compared to the same motor connected to the shaft of a turbine (2). I get it The question is as follows, case scenario (2) will consume more amps but will Travel faster and a longer range distance than case Scenario (1) that has propeller and a motor????

[@MechNinja]

@@franciscoe.9989 Actually in mini jet turbine engine, the brushless motor is only used to start the turbine and the energy is produced by fuel combustion. And in propeller configuration, the thrust is produced by propeller itself.... Thus we can't compare both of them.

[@muhammadhafizollandra7976]

Hallo, how much does the engine weigh and how much thrust does it produce?

[@runguy1098]

Yes please how much?

[@strexttp]

Interesting video 👍

[@MechNinja]

Thankyou... Subscribe for more videos...😊

[@Vishantshirwalia6160]

Aapne metal ka compressor wheel kahan se kharida🙏🙏🙏 please tell me

[@MechNinja]

Bhai china se mangwaya tha

[@JabranImran]

Couldn’t you heat the air internally with a coil, like in a hair dryer? (Obviously not so hot that it melts)

[@MechNinja]

Yes I can but that works in actual working prototype but not here. Because preheating the air increase the efficiency as it helps in easily mixing of air with fuel and thus results in stable combustion. Hope you understand.... Thankyou And subscribe the channel for more videos....😊

[@JabranImran]

@@MechNinja oh i see, thank you for responding

[@MechNinja]

Subscribe the channel for more videos....Thank you

[@tobins6800]

Compressing the air as it moves through other stages would also heat the air too. However, that adds rotating mass and complexity. With enough stages, the heat generated could possibly get PLA in the glass temperatures. Basically the point where it loses shape and structural integrity.

[@MechNinja]

Yes you are right. That multi stage compression increase the air temperature...

[@il.pianuzz2937]

Hi, nice project, I would like to do it too but I don't know where can i find the metal compressor?

[@MechNinja]

Though it can be found online. But If you won't then I can design one for you ( dm me ). And rest other files you can download it from the website www.themechninja.com Thankyou have a nice day and pls subscribe the channel for more videos...😊

[@vaibhavgajbhe4287]

Tell me from where you're u purchase the compressor wheel?????? ?plzzzzzzzzzzzz

[@MechNinja]

I have purchased it from banggood.....As soon as the product is back in stock...I will update the link. Till then you can check the website to view and download various models. website - themechninja.com/

[@joshhayl7459]

🔵 This is OBVIOUSLY NOT a "JET"-engine! ..... It is a 'Ducted-fan'.

[@sebastianh216]

no. eso no genera ningun empuje.

[@joshhayl7459]

@@pokopiko1439, 🔵 Definition of a 'Jet' engine: "Any of a class of internal-combustion engines that propel aircraft by means of the rearward discharge of a jet of fluid, usually hot exhaust gases generated by burning fuel with air drawn in from the atmosphere". Therefore, by definition, it is NOT a "Jet" engine. My previous statement stands.

[@sebastianh216]

@@pokopiko1439 y yo soy iroman

[@veeretsy7528]

Hey I was trying to make a jet engine for my rc plane will this work with proper airflow here on the US these are quite expensive

[@MechNinja]

Hii there...i would like to tell you that this jet engine is a model of the actual mini RC jet engine. This has a thrust but it will not be suitable for your requirements. You can watch my other EDF videos which has a high thrust

[@veeretsy7528]

@@MechNinja hmm do you have any actual jet engine videos where fuel is used

[@MechNinja]

No sir not now....But i will make one in my upcoming videos

[@NavysSeaman]

Which type of flight controller can I use for a jet fighter drone

[@MechNinja]

If you don't want to use hover... Then you can use pixhawk flight controller

[@jamessheridan88]

Where can you find the model for the impeller? Or a link to the part be found?

[@MechNinja]

You can get it in mini jet engine file

[@jamessheridan88]

@@MechNinja I bought that and there was no impeller file in there. On the other page it says that the impeller and the rod are not included in the files, but I don't know where to find the exact impeller you used

[@Vishantshirwalia6160]

Sir please tell me where you purchase the metal compressor wheel 🙏🙏🙏 please tell me

[@MechNinja]

I have purchased it from Ali express, but now they are not shipping to India....😐...But i have given the file of compressor for 3D printing in the description....

[@Vishantshirwalia6160]

@@MechNinjabut sir I😌 don't have any 3d printer😩

[@MechNinja]

If you want then we can ship the full body or compressor to you ?

[@thibautsola2167]

Hi man, nice job!! Did you to do not put on purpose the peripherical blade who is fitting with the impeller on the STL files? because this one is missing, the one at 1:33 minutes

[@MechNinja]

Hii there...I have checked the file and found the compressor file is missing. It will be updated within 2 hours. But don't you worry just mail me at [e-mail] I will send you the .stl of that part. :-) Sorry for the trouble...

[@justinmacdonald6079]

Did you test the strength?

[@MrMcMuffinJr1999]

Without combustion that’s just a super inefficient EDF with more steps

[@zaynewest1644]

What is the best printer for this and what filament do I need to use for projects like these

[@MechNinja]

You can use any printer to print it. I have used Ender 3 Pro for it. And I have used PLA Material for it.

[@PrinceDasilboy]

Amazing work bro

[@MechNinja]

Thank you so much 😀

[@gabrieleferraro4782]

Vacuum cleaner level 1000

[@ariyaghosh6400]

How really have a great content

[@MechNinja]

Thanks for the compliment..... There is more interesting and knowledgeable content coming on the way.....So thanks for watching and don't forget to subscribe 😊😊😊

[@JacobTJ1]

what good is this? add some see through windows to see this internals rotate

[@noovang2295]

Hi, what kind of software you use to draw?

[@MechNinja]

Catia

[@ekoreds]

Why would you need a separate compressor section if this is an electric ducted fan? Did you print a kerosene turbine by mistake?

[@MechNinja]

I have made that compressor section so that everyone can understand it's working. Though it was not mandatory but from the design point of view, we have to work on detailing. 😊... Thanks for watching it and pls like, share and subscribe for more videos like this....,😊

[@sohelpatan1075]

You are Amezing bro

[@MechNinja]

Thanks for the complements brother .... You can checkout the website for more models...themechninja.com/ And don't forget to subscribe the channel....😊

[@tubewatcher77]

How much more thrust can it produce compared with a normal propeller?

[@elxero2189]

not enough to move anything, its just a model

[@aayush_789]

Did you calculate the thrust? Also 3D printed propellers are very weak. Maybe use ABS. And using Feviqwik to hold bearing on metal shaft is bad idea.

[@MechNinja]

Yes next time I will try to use ABS but these blades are also stronger with PLA as I have used a denser infill. And yes feviqwik is not suitable but it does it jobs perfectly and there is no heat involvement in the shaft.

[@MrBlincster]

But whats the point? A propeller on the motor would have produced more thrust.

[@MechNinja]

It's Just a model. I am working on a prototype of it. Till then you can watch my ducted fan videos. And don't forget to subscribe....😊😊

[@somu9204]

Very nice bro.are you Indian

[@MechNinja]

Thanks bro....and yes....🇮🇳😍

[@lukepotosky7710]

Hello, I was going to post this on your website, but every time I try, it says error, please try again later. SO here I am. I bought the g code files of the jet engine, and when I went to print them, they all worked fine except parts 9, 10, 11, 12, and 7. Whenever I tried to print these files, my printer would start, and then about 5-10 minutes into the print job, would stop, give me an alarm, and give me a kill reason. "Thermal runaway. Restart required." It isn't doing this with any of the other prints that my printer is working on, is it a translation error maybe?

[@MechNinja]

If there is a thermal runway...that means there is a fault in printer not in the file. But no need to worry. Just check the thermistor connection and check for any loose wire of thermistor or heating cartridge. Then it will work fine. And you can just mail us your problems at [e-mail] And also keep me updated about this problem.

[@JudahCrowe-ej9yl]

It make for some good castings For a working engine.

[@MechNinja]

Thankyou for watching and don't forget to subscribe 😊😊😊😊

[@reeceengineering]

The breakdown of math in how the blades are shaped, thats what I wanted to see when I clicked

[@mercuryforlife969]

is it possible to make these smaller? and put them ona rc jet plane?

[@MechNinja]

Yes I will work on the smaller one too. Subscribe for more videos....

[@LofilabLofiHipHop]

First your english ia easy tô undertand and ia Very good. Second congratulathion for your project and for share with us. And Thanks for leading the way keep going. Just and advise use this bearing sistem is dangerous Couse more soon or more late they Will broke, can you bring to us a assrmbly whithout bearing?? THANKS I'm your New sub

[@MechNinja]

Thanks for the complement bro...Next time I will be more professional....😊😊

[@petrokemikal]

I think your brushless motor is undersized for such a big impeller. But very nice model ;]

[@MechNinja]

Thanks for the complement brother. In future I will upgrade this and would make an exact model. Till the you can visit the website for more models themechninja.com/ And also don't forget to subscribe the channel....

[@CodeLeeCarter]

Great project,... but, its very hard to understand you, you talk too fast at times. more projects soon, i hope!

[@MechNinja]

Yes sure bro..... next time I will be slow...😅😅

[@ferce889]

@@MechNinja What he really wants is for you to work on articulation of words; then he will understand you at any speed lol

[@run12252]

Sir I have got this engine plz reply. Please brother

[@mithran8023]

What is the value of thrust and power usage?

[@MechNinja]

It's a model bro I have not calculated it. But you can check my EDF video. Yheay have a great thrust

[@chemicalvamp]

Where is the link for the impeller? Thats aluminum right?

[@alexmilitary95]

hello bell project but may I know if you have done some tests and thrust measurement?

[@MechNinja]

No bro i have not done any thrust test.....

[@wingnutzster]

What specific engine did you replicate here? It seems to be a high bypass design - really impressive - only in the 3D print world would your starter motor cost more than all the components combined of a jet engine.

[@MechNinja]

kzbin.info/www/bejne/kKWUfWeOjcuCeJI I have replicated the above mentioned design. Yes bro its just a model that's why i have used a costly motor for high torque and rpm coz all the power is generated by the motor. But if I have any alternate power source like combustion than I would had used a cheap motor only to start the engine. Hope you understand what i said...And also subscribe for more videos. Thank you.

[@wingnutzster]

@@MechNinja I fully understood and wasn't criticizing you at all, it was a comment about this new amazing technology of 3D printing that allows you to make a 'jet' engine for less than the cost of the motor used to start it. BTW there is a guy on YT who built a working 3D printed jet engine using ceramics but it only ran briefly and was not even close to being as good looking as yours. Keep innovating

[@MechNinja]

Thanks for the complements brother....😊

[@piotrszalczynski83]

,, It seems to be a high bypass design - really impressive '' - There is no bypass in this model. If it would really work, it would be pure tubojet engine with 0 BPR (Bypass ratio).

[@MechNinja]

Thankyou for your suggestion bro .. I am working on a miniature version of it. So thanks for watching and don't forget to subscribe 😊😊😊😊

[@kiranspear7185]

Dam your editing is nice and decent will done again

[@samprutha6757]

how much this 3D print would costs

[@MechNinja]

Dm me at [e-mail]

[@mohammadgulzaib9748]

Which 3d printer you have been using in this project

[@MechNinja]

Ender 3

[@mohammadgulzaib9748]

Thnks

[@JOOLZNED]

Great model, but if it was printed with metal sintering instead of plastic you could have a fully operational jet engine

[@MechNinja]

Yes bro....But Direct Metal Laser Sintering (DMLS) is a costly process.....:-)

[@MikeNugget]

Is this guy from the "How to pronounce programming languages" meme?

[@MechNinja]

🤣🤣🤣🤣 nope.... Phsssssppp......

[@jondrew55]

Interesting stuff. You should print out a mounting rail and put a scale on it to measure the thrust.

[@MechNinja]

Bro my upcoming video will be uploaded in 3 days....It will have exactly what you asked for......So subscribe to the channel bro....😉

[@keitakader3334]

@@MechNinja Which app do you use to watch your 3D project at the start of the video

[@ZainKhan-xx6np]

It would be great if we can apply CFD analysis on this. It would be fun.

[@MechNinja]

Great too see people like you taking interest...😊😊 I can do a CFD analysis but that will consume a lot of time and skills and will increase video length..... And also it would not be efficient to perform a CFD analysis of a plastic model. When I will replicate the actual model..then I will perform it....😊😊 Thanks for watching it. Like , share and subscribe for more videos like this ...😊😊😊

[@ZainKhan-xx6np]

@@MechNinja but we will learn a lot, people like you are a great blessing who share there skills. However i am very interested in CFD and want to improve my skill but i am not financially strong to learn such skills on self finance so i refer KZbin to learn such skills.

[@antoninperbosc1532]

@@MechNinja you have a CFD fo fluids directly in your catia ? or you use aa other software as openfoam and co ? because catia is good for fem or static analyse but require dificult to find plugin to have a good result ... exemple i was never ba able to find speos to calculate real lens / optical ray tracing to simulate optics.

[@shrimpbynightbythomas8212]

How difficult would it be to make a brushless motor jet with a circuit that interface with a car electronic gas petal?

[@onffworld6357]

Very nice ❗❗❗👏

[@MrAP-zd4iz]

which 3d printer will be good for DIY projects at minimum cost in INDIA. I ALSO WANT TO KNOW WHICH 3D PRINTER YOU ARE USING WITH ALL OF IS NECESSARY DETAILS.

[@krillnyetheshrimpguy6152]

Wouldn't a propeller do a better job in terms of thrust to weight...? I mean, cool model though.

[@MechNinja]

Yes ofcourse bro...It's just a model...So everything here acts as a dead weight for the motor. My upcoming videos will be on turbo fan and increasing its efficieny.....So subscribe for more.....:-)

[@earlyhemibill]

What are the specs on the motor, esc, and battery? How big is the aluminum compressor wheel? What RPMs?

[@MechNinja]

The motor is of 3000 kV and esc i am using is 40 Amps and Compressor wheel is 60 mm in diameter

[@earlyhemibill]

@@MechNinja Looks interesting. The compressor wheel looks a lot bigger than 60mm.

[@MechNinja]

Sorry it's 80 mm in diameter

[@earlyhemibill]

@@MechNinja 3s battery?

[@MechNinja]

Yes a 3S battery.

[@LifeofLatimer]

How much thrust in kg does it have?

[@MechNinja]

Not done the thrust test...but you can check my video of electric ducted fan as I have done the thrust test for it

[@rccross4803]

Mech Ninja, How to use Android app And software rc plan make part for example wing.plan body please inform me I don't have ide which one best app for Android any best software please, thank you

[@MechNinja]

Hii there. For Rc plane software...watch this video kzbin.info/www/bejne/fYWUq4qflrN5mtE In the above video perform all the process. The only change you need to do is while choosing the Quadcopter mode, select the RC plane mode. Than the firmware in your pixhawk will be of RC plane. And there is so many apps like Q ground controll, mission planner etc. Download both the app and then select according to its user interface. Hope you get it and comment if you need any help Thankyou and have a nice day....and don't forget to subscribe 😊😊😊

[@rccross4803]

Mech ninja I'm looking videos but I'm saying RC airplane example for boing 787 and boing747 jet how to use best software is best

[@MechNinja]

If you are asking for designing software for RC plane....then you can ho with solid works and CATIA. But prefer CATIA as the surface modelling feature is really great in CATIA. If you are asking of any other software then let me know...😊😊

[@KiranSharma64414]

Isn't that gonna melt down if you use actual fuel

[@robsonpereira3001]

Good night..My name is Robson Pereira ....I from in Rio de Janeiro in BRAZIL. ...How Many turbine ....?

[@atulsinha7637]

model is completed, looking forward to seeing a working mini jet engine.

[@MechNinja]

Bro its a model and it produces a descent amount of thrust. But in my upcoming videos I am designing an electric turbo fan ...So subscribe the channel for more videos...:-)

[@zodyking4595]

would love to modify & scale your design to fit a high powered motor inside of the build. If im correct you would be able to place the motor where the combustion chamber would normally sit

[@mistohope]

how much thrust it generates?.,

[@MechNinja]

It doesn't generate much thrust....check my new videos of EDF...they generate thrust...and thankyou for watching and don't forget to subscribe 😊😊😊😊😊

[@rcplanetech8095]

Where to find the motor you used in the video?

[@MechNinja]

Its a 2400 kv brushless motor used in RC cars and boats. You can easily find it on amazon.

[@AClark-gs5gl]

What is the largest diameter you can print? Thanks!

[@MechNinja]

200 mm

[@AClark-gs5gl]

@@MechNinja awesome. Thank you!!

[@jakubsedlacek4278]

Nice video! I’m rlly interested in what would happen if you somehow put real fuel in there. Maybe it would run for a few seconds🤷‍♂️👍

[@MechNinja]

😅😅😅 yes it would run for a few seconds before melting down.......😅😅😅...But I will make it run one day....😅😅

[@jakubsedlacek4278]

@@MechNinja You could maybe print a smaller one and melt it 😂

[@MechNinja]

@@jakubsedlacek4278 ok I will....😅😅

[@jakubsedlacek4278]

@@MechNinja hahah I’m looking forward to that bro👍

[@wingnutzster]

Negative - it would not run at all. It would turn on motor power but other than that it would just get wet and sticky perhaps the fuel would ignite but not under pressure and certainly not produce any thrust

[@socheat443]

Such a motor would be really nice, I want to create a built-in utility but can not get it

[@dilbert0815]

Buy a ducted fan. Much sinpler and much more effective to drive any plane. This is just a mechanical model of a jet engine and is serving only as a pretty ineffective and poor ducted fan.

[@A1invites]

Is it able to produce 5kg thrust ?

[@MechNinja]

No its just a model. But the real model can....But it is costly.

[@efreniiibravante4373]

What if Flitetest/PeterStripol use this mini jet engine

[@MechNinja]

Yes they can...but it's a model and not an working prototype. Though it has all the necessary parts to work but the problem is its power generation process. Generally these engines are started from the electric motor and then the further process is carried out by internal combustion. But in this model the power is generated by electric motor and hence all other parts acts as a dead weight. You can check my other videos of EDF. Hope you get my point, and thanks for watching and don't forget to subscribe 😊😊😊

[@d0cktor523]

This is just a desk fan with a ton of extra steps

[@fabregatalbert6235]

Hello There is a piece missing that of the video at 1.33 minutes and a half of could you please could you make the part available because otherwise i will have to throw everything i printed out

[@MechNinja]

Hii there...I have checked the file and found the compressor file is missing. It will be updated within 2 hours. But don't you worry just mail me at [e-mail] I will send you the .stl of that part. :-) Sorry for the trouble...

[@fabregatalbert6235]

@@MechNinja ok it's very kind of you i will send you an email

[@mintysugarcube]

one complaint. I'm overly tired of the same music being used repeatedly on almost all videos😑 Apart from that, video is informative and awsome. dropped a like

[@MechNinja]

Next time new songs for you....😉

[@mintysugarcube]

@Mech Ninja Sure bro 😍

[@haroonrashidraja9735]

Is this a jet engine ?

[@MechNinja]

It's a model of a jet engine. But in future, I am working on a actual model. Don't forget to subscribe for more videos like this. Thankyou 😊

[@gustaisa1850]

this isn't a jet engine its simply a over complicated fan

[@MechNinja]

This is a mini jet engine model 😊

[@annoorkhan4219]

Nice ...do you any miniture jet engine?

[@MechNinja]

No bro not now, but will purchase soon....

[@crewneckdeath6801]

Can you inject petrol and test it out

[@MechNinja]

Not in this one....But I am working on one. Make sure to subscribe to the channel so that you don't miss out. And also you can check my other videos .....It's great... thankyou and have a nice day...😊

[@joecalobeer6396]

So, what was the thrust rating? And did you have a plan for it’s use? I’d love to see what that engine could do!

[@MechNinja]

I haven't calculated the thrust because it's a model and has the motor as its main power source. Yes I have a plan to make an actual model with internal combustion power source. You can check out my ducted fan videos too.... Thanks for watching and subscribe for more videos like this...😊

[@DL-kc8fc]

@@MechNinja It is assumed that when you connect an AC motor to the model, the thrust will be expressed in Newtons at the end of the video compared to, for example, a suitable aircraft propeller. :) It follows from the logic of things. It's my fault that I didn't immediately jump to the end of the video to verify my assumption. :) Not to be critical, I praise 3D printing. I work professionally at Catia, so I also evaluate this page positively. :)

[@HaznieModelAviator]

Hi there.. Where can I download this turbine stl file?

[@MechNinja]

There's a link in the video description....... themechninja.com/design-files/

[@HaznieModelAviator]

@@MechNinja waw..thanks mayn👍👍👍👍👍

[@gerard0_133]

Which 3d printer do you use?

[@MechNinja]

I have two DIY Printers and a Creality Ender 3

[@ariyaghosh6400]

Whats its maximum output thrust

[@MechNinja]

Bro its a mini jet engine model. Its not a working prototype because it is fully 3D printed and I can't use the internal combustion. Here the power source is electric motor and thus some parts are just acting like dead weight. But I am in the process of developing an actual prototype. So thanks for watching and don't forget to subscribe

[@kevil123oo7]

Is it possible to scale down the engine?

[@MechNinja]

Yes it is possible....But it will act more like a model...

[@ayansunil2294]

What is the thrust of this jet engine?

[@MechNinja]

Not calculated bro....but I have done a thrust test of Electric Ducted Fan...you can check the video kzbin.info/www/bejne/bmnGfmeLfd-Fbc0 And also you can visit the website for more models themechninja.com/shop-2/ And don't forget to subscribe the channel...😊

[@ghostgamer0038]

Can you send the model of mini jet engine .

[@MechNinja]

Yes i can send you sir..mail me at [e-mail]

[@DMXHindiGaming]

Is are you from India?

[@MechNinja]

Yes bro....

[@DMXHindiGaming]

@@MechNinja ohh me to

[@krishnananda.s1394]

Good, can you make a micro version with dimensions 5cm×5cm×5cm(lbh).

[@MechNinja]

Currently I am working on reverse thrust 3D Printed jet engine. If you personally want a micro version then you can mail me at [e-mail]

[@commiezombie2477]

No fuel system??🤔

[@MechNinja]

It's just a model..so no fuel system....but my next video is of an electric ducted fan ....so subscribe for more videos...😊