Megasquirt Swap - Part 2

It's been a long time coming, since I've been busy lately. New headers are installed, and the intake manifold is nearly ready for permanent installation. Following that, I can hook up things like the fuel system and wideband controller.
Follow me on Facebook and Instagram:
/ about
invitescon...
Hit up Patreon or PayPal if you're feeling generous:
/ turboranger208
paypal.me/motorhead1991
#Megasquirt #Chevy350 #TBIconversion #C10chevy

[@davebar2017]

Didn't read the #1 FAQS on megasquirts site

[@208Concepts]

What is a Megasquirt? www.megamanual.com/MSFAQ.htm#whatis

[@jarriouscoleman1465]

But what about making the fuel injectors work

[@208Concepts]

What do you mean? They're controlled by a Megasquirt 2

[@jacobjarvis2545]

They make a tbi adapter so u could of used the dual plane

[@208Concepts]

I was concerned about fuel distribution. I may try it later though.

[@heavydutyroadsidellc920]

vortech head swap, they will flow better and that manifold would have bolted up

[@208Concepts]

I didn't want to change the valve covers. Initially, I planned on putting the swirl port heads on but those aren't that great.

[@heavydutyroadsidellc920]

@@208Concepts you might as well pull the heads, you are already that deep into it. might as well go the extra mile. if you can find vortec heads you will have a pretty good increase in power because they flow so much better. and for a few 200 more you can get a cam and springs to toss in it. well worth the throttle response and drivability. its a mild cam that still makes great manifold vacuum. www.summitracing.com/parts/hrs-98214-k11?seid=srese1&gclid=EAIaIQobChMI5ty21dPW8AIVURmtBh0xNgyHEAQYAyABEgKoiPD_BwE www.summitracing.com/parts/sum-1103?seid=srese1&gclid=EAIaIQobChMIn9-z3tDW8AIVtSitBh2wmA-GEAQYAyABEgJURfD_BwE

[@jessicaripley5654]

Dude what happened to this swap?

[@208Concepts]

I'm still working on it. The last 10% always takes 90% of the time. And it got pushed outside the shop, which doesn't help, but the other vehicle was kind of an emergency case. It'll be back soon, probably before "the mistress" is up and running.

[@skyfual]

So you never finished this?

[@208Concepts]

It's in limbo over winter. I got tired of laying on the cold concrete to do the exhaust and didn't want to tie the lift up in the shop. It'll make a comeback very soon.

[@sparkie5571]

@@208Concepts could always start it up without the rest of the exhaust system on ;)

[@208Concepts]

@@sparkie5571 I very well could... The Mistress is taking up the space currently though. I might finish the stuff on the top end between other projects.

[@suttonkellan3475]

i guess I'm kinda off topic but does anyone know a good site to watch new tv shows online ?

[@everettkarter5716]

@Sutton Kellan Flixportal :)

[@TheFreeBeard]

This isn't very Megasquirt focused.

[@208Concepts]

This particular one needed other stuff too, as shown in the video. Since it was related, I just rolled the title over.