Рет қаралды 7,908
This is a very cool plastic 5-tier shelf unit. It can be 5 tiers high or 3 and 2 tiers next to each other. Each shelf holds 200lbs and is very sturdy. Assembling the unit is easy. The only tool I needed was scissors to cut the smaller parts off from the mold. The instructions are lacking for how to assemble the feet, so I had to figure out if they were 2 or 3 pieces. The feet are only 2 pieces: the threaded foot screws into the foot collar. The cap is not used with the feet but to cover the holes on the top shelves. The unit is 20 inches deep and 4 foot wide. If all 5 shelves are tiered atop of each other it is 6 foot tall. There is 14.5 inches of room between shelves. It comes with brackets to secure to a stud in the wall if going 5 shelves high so it won’t fall forward. It can be assembled into a 2-tier unit and a 3-tier unit that attaches with brackets side by side or front to front with clips. This is a very versatile and sturdy unit- it had no problem holding me on a shelf. It being plastic means I don’t have to worry about it rusting. I am excited to use it in my basement for heavier boxes and totes. It would also work great in my garage in a 2 and 3 tier next to each other.