Mercedes-Benz S123 300TD | Beating A Dead Horse?

Yes I know... I gave up on this once before...
I might do that again today!
#mercedesbenz #s123 #rust
Seaside Garage is sponsored by SKIL
www.skileurope.com
If you want to support me and the projects head to my Patreon here:
Patreon: / seasidegarage
If you want to contact me then head to my Instagram here:
Instagram: / seasidegarageyt

[@jasperdemann5936]

It's just time, money, metal, gas and welding wire. No problem! 😄

[@user-fz5mb9mv6d]

Hmm, I would strip it for its salvageable components and sell them and then dispose of everything else. There is too much structural rust to take the risk!

[@Anders_HeymSR30]

Brave, very brave! This one is pretty far gone, and in the Flintstone category but nothing money, time, blood, sweat & tears can't fix!

[@user-hp4zw3pv3c]

That is a massive job to rebuild that shell

[@Morzsaszar]

It isnt

[@Parknest]

Don't give up on it. Just do what you said you were going to do (do it bit, get bored and come back and do a bit more and so on) and put out a monthly video on this car. Before long you will have a solid car. Spreading the cost of the panels will soften the financial blow.

[@jochenstacker7448]

He will have a solid car. It will basically be a new chassis welded together using the old one as scaffolding. Seriously not worth it.

[@skjalgiversen8709]

Know where to stop, part it out!

[@johnwaga3702]

Despite its age the S123 was a lovely design of an estate. When you took that front wing off (which didn’t look too bad) what was underneath was truly horrendous.

[@OldCarsNewVan]

I admire your skill and enthusiasm for saving this car - but honestly I think this is too far gone given the 'botches' that have been done by previous owners. Sad though it is, I'd get your money back by parting it out.

[@DSperation]

That's a nightmare. Those inner wings and firewall are doomed. I'm amazed it hasn't gone banana shaped already. Swap the good bits into your brother in laws 240D!

[@neilfoster814]

Good grief Seppo! I don't think that Odin himself could resurrect this old bus! I truly admire your enthusiasm and skill, but I believe you may as well throw your money into the sea! Best option would be to part it out and recover some of your money, as well as helping other owners restore their Mercs.

[@enricio]

At 14 min. the vehicle makes me think about a Fred flintstone vehicle. Joyful to watch though. In Morocco they're dying for these cars. 😎

[@franco992]

The front areas you exposed by taking the wings off look really bad with limited reference points left. I would start here because if it’s too far gone, you’ll find out quickly. Don’t be tempted to waste time and energy doing the easier bits first! Yes I am very dull and very sensible. You’ll need to be super committed to see this one through and I’m just not sure if it’s your kind of project. But if you go for it, we’d all love to see it

[@totalrecone]

'Do something, get bored - do more things, get bored' EXACTLY how I tackle jobs like this.

[@petersullivan3133]

Good morning, love these oldie but goodies, that will be good for another 700k once done

[@glynnbaldwin5543]

You heard the man - get to Patreon!

[@SeasideGarage]

so far I¨ve got 0 out of 1000! :P

[@tiitsaul9036]

Dude! Think how many slightly rusty cars you could save by not wasting time with this one. 😮

[@crossercuss1]

sometimes you just need to walk away.. this is one of them times...

[@narendravara5134]

Just in time, it is a lot of welding but when it is done you will want to keep it it will be good project.

[@jochenstacker7448]

When you have finally replaced every rotten panel, you will have replaced all of them. It will just be a new body welded together from various spare parts using the old body as scaffolding. As much as I love and adore W123s, this is not worth it. It's too far gone. You know that rust is like an iceberg, for every bit of rust you can see, there's ten more you can't. This car needs to go to Old Merc Heaven.

[@stanelder9995]

That is indeed a tough call!

[@kevinw8258]

Sad to say that it is just too far gone. It’s tough but I would break it and sell the good parts.

[@Kaisan-vc8fw]

Anthing is fixable ... it just depends on how much one wants to bring it back. Myself I've reshelled several cars to 'save' them. I personally think your "Do a bit, leave it, do a bit more" is the way to go. All good fortune to you & yours as always ☺

[@bborkzilla]

We have an electric mower and a string trimmer. They are very nice to work with and I like how non-fussy they are to use. I still keep the old petrol (gasoline) powered ones around because there are times when I need to run them for several hours at a time and the (multiple) batteries just don't last that long.

[@SeasideGarage]

Yea I even went electric on my chainsaw now... Not having to struggle with old petrol in carbs everytime I need to cut something is pretty great..

[@davide30541]

the only rust my mitsubishi L300 had on the floor was from asphalt sound insularion sheets not thoroughly glued to the floor but merely laying on top. trapping moisture and digging rust holes...

[@enricio]

At 0.10 min. I had my Joy moment. 😁

[@Edvinas_channel]

if you can get most panels, then it seems doable...

[@user-cn6re9jr1t]

Its not worthwhile to fix, reorganise your cars and money and buy a fine example and keep it properly😂

[@grayfool]

It looks similar to my old 280E. It was far too big a project for me so I had to get rid of it. I would love another one though.

[@harryharker9564]

You've just got to love these old Mercs.

[@KirksAudioSanctum]

12:30 That is not rust, that is all new air conditioning for your feet! I am happy you are fixing this up. You will be very happy when it is finished. If anyone can sort this out, you can. You are very good at this.

[@Haps_q]

This is a also one of my dream cars. I envy you for even considering saving it, but its just so far gone.. The most profitable is probably parting it out and selling spare parts individually, 'parts cars' rarely make a profit :S If you decide to keep it and chip away at the rust then I genuinely hope its gonna be as pleasant as can be..

[@fhwolthuis]

I'm sure you can do it if you're really committed. Maybe talk to Furious Driving, he has done a lot of welding on the front of his W123. Matt will surely want to share his expertise.

[@gutsngorrrr]

If you're going to keep and fix, I'd keep an eye out for a rear end crash damaged one and use that for parts

[@twocvbloke]

It's certainly had a lot of self-lightening going on, as to whether it's a long-term repair project or a parts donor, well, that's all down to whether you're looking for monetary value out of it, or gain some form of personal value with it, like sentimental reasons or a project to prove you can do it or something, myself I'd be going for parting it out, that rust looks like it's probably gotten into places yet to be revealled... :\

[@chrisbury4635]

Think I'd be assessing the structural areas up front first before going any further 😊

[@grumpy2.0]

I'd enjoy a series of videos on the Drain repairs.

[@kevinnye5132]

I am still rust dramatised from the first video on this car Seppo , please please don’t ask me to watch it again 😂. Yes it’s BAD 😁 understatement ! watching your vids is like rust archeology, it’s a frightening story.

[@andyarmstrong1493]

Wow! Rusty. Try "furious driving." he has done a lot of metal replacement on a 123.

[@kd23se4]

Mat from Furiosdriving YT chanel had the same rust spots under the arches.

[@guillaumeromain6694]

Such a fine car!

[@morganmcdonagh2663]

I also have a w123 estate, I am not surprised how rusty it is. These w123s hide the rust very well. Once those drains in the bonnet hinge pockets get blocked things escalate quickly. It's pretty far gone, it's repairable of coarse but it needs a lot. Maybe you can repair one side of the floor and footwear and see how long it takes? It will make a good video if nothing else

[@SeasideGarage]

Yea its not the first time I saw w123 that looked decent and ended up being close to collapsing... They hide inner problems like a true redneck.. its quite impressive...

[@dungbetel]

Ahhh, yes... Quite a bit of weight reduction there. But a classic Merc and well worth saving!

[@marcellorava6149]

I would love to see this rising from the graveyard...but I suspect it too far gone... But if there is one person in the world that can save this car...it's you :-)

[@TV-rm8ug]

Do it! Do it! 😊

[@elgorka5103]

What if,,,,considering fact that 123's are already pricy,,,in estate form, take 124 estate instead...those are still affordable, and to my opinion made to the peak of MB quality of all times. Actually they are also easy to work on, and parts still available at reasonable prices. But one needs to act quickly they're not going to be cheaper ;) I used one of those for years ....and I regret selling it to try some other ....french hydro...dramatic ...scary and pricy in repairs xantia break.

[@jefferysmith3930]

If…you want to take on repairing the cowl/firewall/scuttle area, check out Soup Classic Motoring. He did similar repairs to his W123 on a fascinating to watch stop motion style. No idea how he does it, but great to watch. Your poor car is pretty far gone though. Quite a task. Good luck

[@SeasideGarage]

Yea watched a lot of Soups... his videos are art...

[@timbre7999]

Perhaps strange to say but I hope it can be saved, it is just a heck of a lot of work, as you say.

[@PSNeko]

Holy 123 Hell🫠

[@chilternman]

I would look into any guides or videos showing repairs to inner wings. If this can be done in a satisfactory way then the rest is not terrible. I would start at worst area and judge what you think. If satisfied then do rest when you feel like it. Matt from Furious Driving has repaired similar so check out his videos

[@idrisddraig2]

Start with the scary parts - Look to Yorkshire car resturations and Soup automotive for inspiration

[@SeasideGarage]

Good idea!

[@krtgiroto]

Salvage the good parts and scrap it, save your time and energy for a better example.

[@JeremiasGarage]

Trevlig/dejlig video ☺️🔧🫵 hoppas du kan rädda den men förstår om det blir så att du säljer den i delar. Man ska inte vara för hård mot sig själv 😅

[@lesklower7281]

The best part of this Mercedes-Benz W123 is the engine abpnd there is another you tuber slowly restoring one of these and the rust he is replacing making repair panels he has the petrol one and been right hand drive and it has rusted in similar places yours has and the acceleratir pedal is not the best because of the rust he had all sorts of problems with the petrol system but it now starts and l also have an electric mower but it needs a long cord to run but l like it

[@thomasspilcker8382]

Hvis der kommer vand ind gennem luftindtaget foran , så skal instrumentpanelet ud plus plus . 4 nye hjulophæng .

[@thomasspilcker8382]

Under døre er der nok også rust . Tag dem af .

[@KirksAudioSanctum]

0:10 Could you please come to my home and cut my grass for me? 😂😂🤣🤣😂😂

[@markpirateuk]

I have scrapped less rusty cars, it really is too far gone to be viable, the deeper you dig, the more rust you will find!

[@rustino666]

Woah, she's got a hefty dose of tin worm. That's an awful lot of work there. A difficult decision for sure.

[@ShaunMurray63]

It is in poor shape , a re-shell would be a good idea but with time and patience it is do able to repair . But I guess patience could run out before the rust.

[@jesper1406]

W120'erne bliver meget mere værd i de kommende år, og pladedele er nemme at få fat i. Den skal selvfølgelig bare laves i stand! 😊

[@SeasideGarage]

De er steget ret kraftigt ja...

[@bborkzilla]

That's the problem with W124 Diesels. The engine and transmission last far longer than the body shell.

[@SeasideGarage]

750.000km on this.... Gearbox is dead but still drives... :P

[@KirksAudioSanctum]

16:40 No, stop right there!! That is your baby you are talking about... I vote you get the repair panels and sort it out... It looks worse than it is.

[@SeasideGarage]

I thought it was yours! :P

[@KirksAudioSanctum]

@@SeasideGarage it is! You are keeping it warm for me. 😘

[@janikoivunen1148]

Rent or borrow a truck and come to visit Finland. I’m up to sell my property within a year and I have two sedan shells (and ton of other stuff for w/s123) for you wich have solid stuff at the firewall area. Approx 80 km from Turku. And yes, really cheaply.

[@SeasideGarage]

Yea could be fun!

[@worldofrandometry6912]

It's rough, ouch! Who did the MOT, Stevie Wonder?

[@christianchristiansen99]

I bet - all while singing “Don’t you worry ‘bout a thing”..

[@huwdavies6650]

Maybe you should swap notes with Matt Furious Driving on his W123 efforts.

[@SeasideGarage]

I wonder if I abandoned the project? Have not seen anymore 123 videos from him in a long time

[@huwdavies6650]

@@SeasideGarage he hasn't been able to get it out of his garage to work on it as his rusty Crown Vic has been in the way.

[@SeasideGarage]

@@huwdavies6650 ah!

[@Mad_Skill_Garage]

Yikes! Some off time at the storage, apperently didnt fix the rust! 😮😅

[@dDoOyYoOuUtTuUbBeE]

But there are less and less of them.

[@kosir1234]

i thought it would be more bad :D It is savable, and you would learn alot of metal working if you would complete this. But it will take shitload of time and motivation :D

[@SeasideGarage]

Come by and help out a bit! :P

[@kosir1234]

@@SeasideGarage who knows, maybe :D

[@janosnagyj.9540]

12:36 I think this is what would be quite literally a _bottomless_ money pit if you ever had the terrible idea to try to save it. Here you don't need to look for repair panels... no my friend, even if every single one was available, you still didn't needed them. What you need here is a replacement body, as a whole...

[@janosnagyj.9540]

I forgot to mention, I still don't understand, how it could have a valid MOT in a country which is not in Africa or somewhere in the US where there is no MOT at all...

[@andrewmooreandrewrmoore7615]

Those inner front wings are grim. The whole project depends on whether you really think you can repair them well. If you don't then it's not viable.

[@martinwillemoes7234]

Walk away...Or start with the most difficult repairs. Doing the easy ones now with obtainable panels will, as you say, be wasted if you decide to stop. In this way it will also be easier and easier :)

[@SeasideGarage]

I think I will try with the hard places with no panel available... that way its free... only time..

[@ianwheeler7903]

Unfortunately, the car is passed its sell by date. Best to sell it off for spares.

[@LesterLovesWatches]

How could the Danish inspectorate know whether the shell that you swapped came from Denmark or not?

[@SeasideGarage]

Because I make videos online! :P

[@LesterLovesWatches]

@@SeasideGarage Haha. Point taken.

[@sepek6944]

Thats my dream car🥰 i would do everything i could to save it. please don't part it out.

[@LS430VIP]

Just my thoughts, I don't think this one is worth touching. You'll sink lots of time over many years hopping on and off this job, and it still won't be done. Better to sell the nice parts like the rear bench and engine, and look for another to scratch your S123 itch. It's painful to scrap a car I know, but you can only work on and drive so many cars in your lifetime, and by getting rid of this one you may open up time and money to experience several other cars.

[@johnjob8872]

If you get an extra thousand patreons you will have to speed up your credits! Save it, don't weld it up to look pretty where no one can see it, just weld it solid, isn't sheet metal cheaper than factory panels?

[@chrisbowditch6684]

I think you should fix it, you have the skills, it would make good content, and you said you dont have the cash to buy a good one. You can't scrap it! They're not making any more!

[@rustyrover3808]

I’m afraid that’s too far gone, plough your skills into saving another 4 cars in the time it takes to fix that, which will only ever be satisfactory

[@netzwerk-werkstatt332]

Please do Not waste time and money in saving this. You will find another one that is worth to repair and save.

[@topspoke]

How the F does that car have an MOT?😮

[@SeasideGarage]

Last MOT was 7 years ago... (8 years between) And its been soaked since then... and the rust had been hidden well back then... (I knew the car back then also)

[@topspoke]

@@SeasideGarage ah I see. We have annual MOTs here in the UK so rust buckets and death traps are much less likely on our roads.

[@SeasideGarage]

here its every 2 years intil 35 years old... then its 8 year... :)

[@topspoke]

@@SeasideGarage over 40 years old there is no MOT required at all here. It's then at the driver's discretion.

[@gabrielep9938]

Save it, start the restoration on it! I think is salvageable. But start from the areas where there aren't repair panels available, so you doesn't put more money on it...

[@DumpoDeluxe]

Lad den gamle mercer få fred! skrotpris!

[@Morzsaszar]

Not a big deal

[@sietse9920]

Be wise and find another car which is better salvagable. You’ll have your fun, no worries. But this one will make you broke ánd sad. Very sad

[@puttitat2851]

I'm usually all for fun jobs, but this seems too far gone to make any sense unfortunately. Would keep you from showing a lot of interesting and fun progress on your channel I'm afraid. :/