Metal siding, roof, doors, windows and ceiling done.

[@g-man7938]

One of the things that sets the great channels apart is the variety of skills an individual has, you have many and your not afraid to learn new ones.👍🏻

[@garageworker]

Dude! I still remember your small ass garage you had. What an amazing upgrade, happy for you!

[@The-Mighty-Orange]

My friday just got better, thanks Jesse 👍🏻

[@jrehtil1494]

Jesse and guys, you have done a fantastic job, hats off to you and all.

[@michelem1446]

Love the two-tone siding. It breaks up the large expanse.

[@brotherbruce]

That garage door installing is a whole other specialty. Even the trained pros can screw it up. It takes courage to step into the unknown. I had 3 brother in laws that ran garage door businesses. If you did it without losing a finger you did OK. I like the drip edge under the ice shield but have seen it both ways. You are an accomplished builder.

[@donnal.oglesby4806]

LOVE the colors on the new garage shop., great video as well, and thank you for sharing Jesse.

[@sorsim28]

Nice of you to shout out RR Building. Great channel, full of useful information, just la like your channel. The garage looks like dream come true 🎉

[@DeirdreHickey-nx8nt]

You are just incredible Jessie. Well,done team. 👏🏼👏🏼👏🏼👏🏼👏🏼❤️❤️❤️

[@MrPhotodoc]

So glad to see the metal going up on the shop. I almost think it's my place at this point. It can't be easy to work and film at the same time but it's quite valuable to your audience.

[@t.w.3]

Alwways nice to end off a busy week with a nice video. 7PM here, and I just love these kind of videos. No one is born with all the knowledge. Learning by doing is usually how life progress and we learn from it.

[@AW-Services]

A truly remarkable build project from start to finish. Really enjoyed watching this workshop progress from groundwork to finish. It's a brilliant showcase of your skills and adaptability with a faultless finish. Thanks for sharing your work Next stop, Adirondacks

[@georgefitisemanu6281]

I love everything about this build. I think the colour scheme is great! Great work Jesse & helpers. You’re such a talented man.

[@ChuckNorriz1122]

Watched you for a long time. Very happy for you finally getting the shop you deserve. Well done!

[@rkins100]

Came out great Jesse. I agree about the feature strip where the panels join unless there is a sharp edge where you, your crew or your family can get cut.

[@MySynthDungeon]

Hanging out with Jesse This afternoon! Here we go! Learning time! Cheers!

[@TyBradley-x8n]

AWESOME VIDEO great start to a Awesome Shop. Glad you were able to get it weathered in before winter. Keep up the good work. Your videos make my day. Thanks

[@SoupyOatmeal]

Mr Jesse Muller is creating an empire in New York State , lol . I remember your first videos , How far you have come with a little help from YT . Congrats to you sir.

[@oldodger]

What a great looking shop building. I'm jealous !!!

[@ozhoo]

Awesome choice going with the white roof 👍

[@Box545x39]

An absolute class act hard worker and family man. The shop turned out great, that's a lot of effort and you did it so quickly too.

[@we02]

Very sleek and smart looking building. Awesome job!❤ I really like the way it all turned out. You all work so hard. All the best. 😊

[@CerebralAilment]

That looks beautiful man! Look forward to a tool room tour one day!

[@tomjohntig]

Looks fantastic Jess enjoyed the content of the video. Thanks Jess looking forward to the next one. Tom. UK

[@deannelson9301]

Love the color combination. You should be proud. Well deserved.

[@sylviaprudhomme5417]

YEAH. Been waiting for that. It’s outstanding. Love the colors and glad no transition strip that job team😊😊😊😊😊😊

[@onepup-pr3yl]

Your whole outfit is coming together nicely and, just shows the vision and ability you have to achieve it, I can see a big sign across that building ''J. Muller & Sons Corporation'' great job, and definitely an achievement to be proud of.

[@Rockport1911]

Came out great. Really exited for the big solar installation :)

[@anthonywilson2346]

Love the wainscoting and the peek contrast🇬🇧😊

[@letmelooktv]

Amazing team effort! and another great video.

[@KELLY-kq7fb]

Eyebrows above the garage doors would look awsome.

[@BobCaseyAerial]

#FullWatch. There is only a couple of channels I can stay with for two hrs. You are one of em. It looks #FanFrigginTastic. Nice edit too Jesse. If you hadn’t sped up spots it would’ve been 4hrs long. Nice work bro.

[@patrikpersson9446]

Dang!!! Such a nice workshop!!!

[@dmmaddex]

You really make things look easy, JM.

[@rickybobby9255]

Been waiting for this update! Let's go!!

[@garryblok8514]

You guys did a wonderfully job on this building, just looks so good.

[@jg6142]

Nice job Jesse looks great!

[@777cygnus]

Outstanding. 🏁Pro work 👍😎✨🎄great you insulated out!

[@3cl1]

What a great video, stay safe.

[@robmosher362]

Hooray you’re back with a video.

[@andrewpowell6457]

Jesse Great work by you al. It looks great.

[@martinkennard1669]

Great job Jesse! We just completed having our house covered. Dark green roof for Northern MT. You are a jack of all trades. I have to differ with you. Energy travels to a place lacking energy. Therefore, outside building heat travels inside (minus insulation value). Try choveling grain in a metal grain bin on any sunny day. You are right on the white in your location. Good Luck!

[@fredrikg120]

sweet video man, thanks! Greetings from Sweden!

[@tomdale1313]

making a tool to fix all the other tools, "GREAT SHOP"...thxs for sharing

[@cortcam664]

Double spot lights on the front of the bird boxes may look really good. But boy what a beautiful shop/garage/indoor party room/basket ball court/wedding dinner/dance venue. Big huge B B Q lunch inside for the "crew", paid for by the boss, coming soon? 😊

[@junkboxgarageOG]

Looks great buddy

[@ДмитрийЕрошенков-к6в]

Отличный гараж получился!👍👍👍

[@JerrellKull]

Looking good Bro. Y'all take care...

[@robmosher362]

Thanks Jesse, your videos are always pleasant to watch. Looking forward to many more. The more videos you put up, the more views you will get and the happier your subscribers will be. Right now,it’s a toss up with you in in the lead over Diesel Creek , who seems to be slacking off. Keep up the great work.

[@harveylong5878]

pumping out videos can be double edge sword. Quality over quantity. Creators have fine line to balance

[@robmosher362]

@ Agreed, happily Jesse is one of the best. We hope that he does well.

[@KMoran-cw2fd]

What a great building!

[@andyperrine9987]

Has to feel good getting that done!

[@Mike-s3x3x]

Good evening Jesse, from a UK subscriber. I have just got back from having a few beers and saw you had posted a new video. Due to the power of drink i got really excited, i thought the title was Metal sliding roof, doors windows and ceiling done. It's a great video though even without a sliding roof.

[@george1-nu5ey]

Happy for you. Great job.

[@jsc0]

Excited to see the solar project for this building.

[@MarkDurbin]

Looks great! Thanks for the video :)

[@edwardreeves6]

Finally back

[@kevinfisher1632]

Brilliant.....well done Jesse

[@jamesboris1233]

Great on the garage thank you for sharing

[@mini2gora337]

Chic. Elegant. Bravo.

[@Bo88y22]

Looking good👍👍

[@vomlande9112]

Congrats great job guys.

[@DovgalyukProductions]

Trump victory and a jesse movie in same week. good way to end the week

[@margaretwilkinson9140]

amazing!!!

[@johncosmic9028]

awesome job dude 😊😊

[@briany6989]

Looking good Jesse 👍👍

[@novaromer]

Awesome video! Thank you.

[@glenlongstreet7]

Somebody bought a nibbler. It is the ideal tool for cutting these panels. You can cut them with a high-speed grinder, but the nibbler just works better. If you are cutting down the seams, then the tool you should use is called Shears. They cut out a strip, but they are useless going over the ribs. Nibblers for cross cutting, Shears for cutting longitudinally. Like the difference between a rip saw and a crosscut saw.

[@rediband]

Hadn't been watching since way back when, but those two flatbed truck vids caught my interest. Daanng, the quality's way up there on this channel now. Maybe you're starting to pass up even 'him'.

[@RollingThunder808]

Nice job. When you paint the inside walls make it two tone like the outside.

[@stephenhammer7357]

love it great job

[@renebbenny-yc3jj]

loking wery nice good job an god team you have you work very god togehter nice

[@merlepatterson]

A lot of times I'll see guys run Z-flash at the break of the Waynes coat as an accent, but overlapping is just as good. The shop looks pretty damn good Jesse. Must be a nice sense of accomplishment. Now you just need a huge set of Texas Longhorns to hang on the outside gable end.

[@brotherbruce]

Was the overlap enough?

[@merlepatterson]

@@brotherbruce Looked like it was.

[@haroldhaugaard410]

Looks great, good job :)

[@anthonykutey1686]

Dang.. that looks nice!

[@jimwest986]

I ASK YOUR DAD IF YOU WAS ALRIGHT, IT HAS BEEN 3WEEKS OR SO GLAD YOUR BACK

[@tylerbarrett6652]

Nice job! And I know what you mean about using light colors... white is my choice for vehicle color for the same reason... but also it attracts much less attention from the PTB than, say - Arrest Me Red, you know? Thanks for sharing all of this with us. I was getting concerned because it had been a couple of weekends and we hadn't seen an upload... and NO WONDER - you did everything all together, it seems... the editing and uploading and stuff can come later. I get it.

[@andersjeppsson2456]

Have a nice weekend.

[@sydneymcconnaughhay5947]

Sorry Jessie couldn't watch the garage door spring application,,have bad memories about it,,,but the rest of the vid is mint.

[@mhkoo1]

Jesse, about cutting the J channel above the door: water creeps in seems so I think that you need to put silicone to prevent that water gets behind the J channel above the corners of the door. For the rest I think you did a good job!

[@1howieshel]

Nice work man, keep them coming:)

[@icepick1945]

Hi Jesse, don't think you need the transition strip, this looks crisp! White roof to reflect heat, and it will aid the solar panels as well.

[@TheNortonio]

I have one of those Ryobi brad nail guns. If it's the same model I have it was only like $99. Have had really good use out of it.

[@mikaelhg]

A nice looking garage. Have you considered a hot water tank and a solar vacuum tube direct water heating system, on top of your solar PV system?

[@kjterz]

Well Done...............................................................

[@Mostafa-vs8bd]

Hello Are you instal trasmission oil radiator for telehandler? You said maybe i will install one on front with fan, Good to have one in hot weather

[@uncle_moose]

This video needs waaaaaaay waaaaaaay waaaaaaay more trucking and sunglasses.

[@luckydog9809]

Been watching since video of sawmilling Andrew Camarata logs. Maybe I missed it but, has Jesse ever introduced the other two guys that help him?

[@youpattube1]

An excellent and interesting video. I agree with the two tone look. It does't look boring this way, and the bird boxes are right too. The garage turned out great. Good job. One thing I didn't understand - when you were putting up the ceiling you talked about 3 ft and what sounded like "proper" vents. What were you alluding to ?

[@jmuller86]

those are the baffles you install to keep the roof ventilated and still able to put insulation on the ends of the wall

[@youpattube1]

@@jmuller86 OK. thanks.

[@TomGuimond]

​@@jmuller86 Excellent video but I would have liked more details on the installation of the garage door including how we make it waterproof and that there is no water infiltration when the garage door is closed but apart from that the video is very interesting

[@Gitrdoneyo]

I have a decade of experience doing metal work. Free stall dairy barns , houses , shops , commercial buildings etc. one thing I didn’t like to see in the way you did your roof was just screwing into the osb. It works for a while, but with the expansion and contraction of the roof steel it will walk out the screws. Seen it many times. Once you find out it’s leaking like 95% of the screw holes in the osb are rotted and you can’t tighten the screws anymore. Another thing with the panels running off square, screw the overlap,just measure off of your face board then stretch or pick up in the center of the panel to shrink it.

[@jmuller86]

How else would I attach the screws to the roof? Thats 5/8 osb too. Would you have done purlins?

[@Gitrdoneyo]

@@jmuller86 yea, certainly would’ve done purlins. Even a 1x4 on the roof sheathing would’ve helped a lot. Usually minimum 1 1/2” of wood substrate to screw to. Wind resistance can also be a problem from screwing to just osb. There is a company that makes screws they claim are made for osb think they’re called zxl woodbinder or something. But those seem to back out as well.

[@jmuller86]

@Gitrdoneyo that is interesting. I have not heard of this. I will have to check into it

[@Gitrdoneyo]

@@jmuller86 yea. Aluminum roofing is very bad for doing that even if screwed to 2x4 purlins it will walk out the screws over time. Once the screws are loose its leaks like mad and once wind gets underneath I’ve seen whole buildings roof be completely stripped of the steel. Live and learn I guess, nice shop otherwise , keep it up 👍

[@glenlongstreet7]

@@Gitrdoneyo Could you use metal studs for the purlins?

[@kenactofkindness4017]

started full watch as usuall, go go 😂

[@joedoakes8307]

I was getting nervous and jerky needing to feed my 'Content' monitor !

[@jurgenh3671]

👍👍👍

[@merlepatterson]

You thinking of installing a waste oil heater?

[@jmuller86]

I would love to but I would want a waste oil boiler for the radiant

[@merlepatterson]

@@jmuller86 Yeah, that's kind of what I thought.

[@1.5acrefarmer42]

Class is started (finishing your huge shop).

[@TimBasl]

Hey Jess, would you be able to tell me the brand of the overhead doors? I like those and will be in need of some for my shop.

[@jmuller86]

pretty sure they were clopay

[@grahamg6212]

Just need a custom weather vane on the top 😀

[@peterkramer6798]

A big good Job. Fantastic. Greats from Germany

[@damstr8345]

That looks nice. Keep up the good work. But you may regret better insulation. But I'm more off grid status

[@CraftBeerTastic]

Are you going to insulate the ceiling? Cheers!

[@robmosher362]

Get the gutters on or at least some stone along the sides in the meantime, to keep the splash down and the sides clean please.