Building the RX-7 a NEW Engine! (GEN V 5.3 LT)

[@OGbqze]

You need to post more often. Also your shop is so damn clean.

[@steve-o6060]

I'll watch whatever you put out. Keep up content 👍

[@adamlambert3892]

Fr

[@Shadow0fd3ath24]

You gotta post more man, this is a huge oppurtunity to have 100k and a decent base of watchers, plus your skills are insane of fab. Could grow to be huge!

[@baby-sharkgto4902]

💯

[@joshs199]

I can't wait to see the Rx7 with it's new setup. I think it's going to be ripping even harder.

[@imalec]

Excited for the end result. Hopefully it can make a trip to visit the boiz once it’s tested.

[@CCDzine]

Cool, you are still alive.

[@Ribbityibzki]

Man the last time I saw a video you were in was when you were building turbo manifolds for Kyle. I was at Wyoming Street wars today and saw you make it to the final. The car looked killer!

[@vintagespeed]

more content man, love your vids! she's gonna rip! 👍

[@alraybaca6235]

I wish you would do more videos you are really good at what you do and really enjoy your work/videos

[@trevorsmith9251]

Great to see you powering on and at 100k 🎉💪

[@goldgitter3548]

You ran into a "shit happens " situation and handled it like a pro.

[@robertmcmillen8600]

I have been watching you since the turbo geo. You have grown so much and it's truly awesome to see ❤

[@jd2181]

Know I'm late to the comments. But keep up the awesome work Hayden. Your craftsmanship is second to none

[@SirVic42]

Really excited to see the sparkling new Metigulous turbo kit you whip up for this!

[@v4yt126]

glad to see you back

[@Mopar_logic]

Good luck at the race!

[@okobojian1860]

Hey you put this out as I was flying home. Odie boat picked us up long hard day. About 21 hours of air ports and air planes. Looking good, plan on tuning next week. If I can I’ll try to make Wyoming.

[@bnmperformancefab]

“To much more fancier” love it

[@MohdHairien_9]

Nice and clean shop Hayden.

[@Brandon-Moore]

Jimmehh sent meehhh 🤙🏻

[@gkelvin521]

Please do a video covering the dry decked block

[@dustinfrye9500]

Glad to see a video man

[@n20cpri]

Gonna be a beast. 1300 is lofty! lol Good luck as always!

[@Gokartsandstuff82]

Can’t wait to see you go fast

[@samleisch1388]

Every video is a banger man, keep em coming!!!

[@Phillyracingsource]

Content is awesome brotha, love watching the racing videos and seeing how well the rx7 works on bare roads and all

[@cbdreamer1709]

Going to be so sick

[@kzarnold3678]

Nicely done 👍

[@wadebonhomme2142]

Rough break on the studs!

[@tracy2928]

Rodney is gonna come a knockin for sure. I don't see the stock rods hangin in there long. Nothing about your or your tuners abilities.

[@MedusaForceRacing]

Ready for the next video.

[@slappomatthew]

Congrats on 100k

[@robwigglezz944]

Looking good. Sucks you were short a stud after waiting for nuts. Race car stuff haha

[@RaceBrosCarlos]

💪🏽 get errrrrr done!!!

[@luisa.betancourt5077]

You got this!!

[@Backupnow-gf7wb]

Lets goooooo, keep up the grind 🔥❤️🔥❤️🔥❤️

[@Lacunacraft]

Man, it looks so clean and damn is the RX-7 looking good. Not sure if you will hit 1,300 horsepower on it, but it should be damn close to it

[@1411MEDIA]

Looks good my dude. Need all the boost and fuel

[@shanewright6958]

Looking good 👍👍

[@the33l1ne6]

Hate it. Lol. Nah wicked watching your journey mate. Good luck all the way from Australia 🇦🇺

[@RoOsKiE87]

Get er done

[@stevereinhart4067]

1300 at the wheels on a pretty much stock 5.3.....good luck.

[@199rocks94]

Ran into the same issue with arp….trying to get a motor together and find out they didn’t put the washers in the box

[@daniesalex7073]

New 8 Rotor , yay

[@winster0]

My Man

[@hyper8545]

Sheeeeesh dood is alive

[@matthewmcclintock5806]

It must be a pretty common thing at ARP because I've been short on head bolts and gotten mixed sizes from them

[@9d5sn95]

Drivers side front headstud is a different size on lt motors, reuse the factory hex bolt.

[@RedEyedPatriot]

My Bro JimmyDale sent me 😎🤘

[@_Otaku-kt8be]

Damn didn't even know you still post videos.

[@russgregston4757]

I'm fixing to build an LS engine for my car and am looking for info to dry deck it. Any tips?

[@nickrussell5150]

Hope everything works out for you in the end with weight transfer

[@justinbonee8302]

Jimmehh sent meee

[@danieldelpha1315]

Why hard block if it's SBE? Is there some worry that the block fails before the rods?

[@GTFCEO]

Nice block is filled already, and your girlfriends wicked pretty! The hair is sick and if you didnt know like i didnt until google told me, SBE means Stock Bottom End, not Small Block Engine like i thought lol

[@Smokey72013]

I pray with you. Guys have made alot on stock stuff properly setup and tuned. Ì honestly think all aluminum nlo KS should have incerts to keep from pulling threads out all the time.

[@billbaggins9961]

Just curious if you did any chassis updates since this DAWG was starting to really run? I thought you had mentioned you were going to but I haven't seen anything on the update

[@dougj.8288]

I would like to see more content… as for the motor I think it will make 1300, those motors have been impressive what people have done with them.

[@samdemartino2531]

What's the block weigh after the epoxy?

[@gasparsperformance9841]

Will you be making it to the street outlaw event at Bandimere?

[@Mopar_logic]

Where have you been?! We need more videos, please.

[@jarredflynn]

Nice vid.

[@joesf1026]

Second time I've seen the wrong nuts in a ARP headstud kit in the past couple weeks

[@davejames2015]

Ya arp can pretty much kick rocks nowadays.

[@oldhomeguy8214]

You going to run locals only at Bandimere No Prep Kings?

[@jamesmiddleton8128]

Rock it!😅

[@jameswallace1283]

really hope you show the rrest of the build and not in a few months. I think i could hold it but you are pushing everything to its limits .

[@andrewevans7181]

Doing the same to my 83 c10 hoping to make 1000hp on the street

[@wyomingwanderer7587]

Watched you run today. After your first pass your car was hauling dude. Don't know what happened in the finals but your car would have given Nate a run for the money

[@rb30e]

Great

[@k20eg69]

Does Sean still work with this guy?

[@vgnope]

11:32 motor install squirrel pace

[@J.F.K.O]

fifth gen but still rocking with pushrods :P

[@mortenhansen7908]

need a collab whit src billy and tommy

[@brucedarby2131]

What front struts are you running?

[@darksideperformance299]

Quality control slacking at ARP 😂

[@derekmelton3915]

Yeah 1300 horsepower is cool but a Mazda 12b would be awesome in that lol😂

[@Fackler91]

I hope it works but i think it won't last mor then a few passes. If you win the race though it doesn't matter after that lol

[@LeapFrog_Radio]

🎉🎉🎉

[@jkfonyi]

I didn’t think stock rods and pistons in the lt could handle that much power

[@freedomfox8183]

They can for a bit the question is how long.. I've got identical engine but still full of water I lifted a head twice both times I went 39-40 psi in a race I'd lift a head by the 330... Hope his works good , maybe dry decking helps alot can't wait to see it going

[@jeffreyfrench5715]

No, I think the pistons fail. 800-900 range.

[@billwilliams2242]

More content

[@kcmedia8185]

Send er

[@madmod]

m-Tig! Sup dood

[@stoker20]

He'll get more views with a engine fail video. People love to see that. Cleeter has made a career out of blowing things up. Kinda like demolition ranch.

[@obsessedracing7843]

It should do it if you don’t miss stuff like me lol

[@NoLyinEvry1sDyin]

Replacing the 8 rotor LoL

[@simanphenix5436]

I hope you do it so I can copy lol

[@bazzaf246]

❤

[@johnywallace8214]

If not one thing it's another😢😂

[@johncoldwell340]

As long as GM wasn't buying scrap metal from china it should be sweet

[@baby-sharkgto4902]

I’m not hating but I am genuinely curious, why stock rods and pistons? I could see if you are poor or broke but I get the feeling you are not. All the work and time it takes to go fast why not put some rods and pistons in it… you would have so much more confidence, longevity and strength.

[@nessie42786]

Is it an 8 rotor 🫰

[@scaleaddict7688]

All that work just put stock rods back in it and hope it holds 1300 horsepower? Wtf kinda move is that?

[@williamcampbell6589]

I guess I'm not the only one ARP has let down. I swear, they can't hire people that can count.

[@Freddys_retro_finds]

1500 or bust

[@mikelellsaesser1320]

ARP really let u down this time, twice even. 😢😢

[@loganb5657]

Just pray you never run into billy and tommy from src 😂

[@lsingleton77]

Why would you assume that? Better yet why would you throw that in his face? Also, in small tire no prep racing there are no givens.

[@Metigulous]

Why would that be a bad thing?

[@loganb5657]

@@Metigulous it’s not a bad thing didn’t mean it in a bad way I just wouldn’t mind seeing you go up against them or go down to their neck of the woods

[@loganb5657]

@@lsingleton77 you seem like you take everything to serious 😂

[@Metigulous]

@@loganb5657 asphalt would be a good race! Front side maybe not so much lol

[@williammercer6765]

Rx7 VS mr2

[@dimequeteimporta4222]

Dude you don't have any more subscribers because you don't post. There is no way on Earth, that aluminum block can push 1300 horsepower on stock internals, although I like the attitude.