MG Gundam 00 Quan[T] Full Saber Review - GUNDAM 00 -

[@mansonfd7835]

Celestial Being: How many weapon does Setsuna want to put into this Gundam? Setsuna F. Seiei: Yes!

[@Frost_Glitch2.0]

Both the seven sword/g and the qan[t] full saber

[@Edward-bb2uy]

@@Frost_Glitch2.0 the full saber has a lot more than the seven sword g, including the combined forms this had 13 weapons (6 bits, gn sword, gn buster sword, 1 katar, 3 dagger, and the full saber)

[@notrod0918]

*Looks at my 00 XN Raiser Seven Sword G*

[@ChrisTian-sd5yq]

@@notrod0918 but can it stand without support stand?

[@steffy2]

Funny how the new v fin makes a huge difference , before i hated the mg quanta head but now it just looks so sleek and on point

[@krystal6753]

Steffey ‘on point’ unintentional pun?

[@Calebdragon-oi9us]

Ya it does

[@_-_-936]

What is v fin

[@steffy2]

@@_-_-936 the antenna section that looks like a v is usually called v fin

[@Rezx2]

@@_-_-936 it's a antenna for communication if you're out of range with teammate

[@EbullientSMP]

The new logo and Bandai Spirits is because Bandai split their divisions into two. The Blue Bandai Spirits division is going to make figures and kits more aimed at adult audiences, while the standard Red Bandai division is going to make gashapon and shokugan more aimed at kids. Essentially, Red = Kids, Blue = Adults.

[@christmasisawesome9348]

thx for the explanation

[@RT-wz3io]

cause BLUE is for adults only 😏

[@wentaofeng5548]

thx

[@jacesonchuatoco342]

Neat

[@maverick6c631]

Then, any new star wars kit with blue logo ?

[@fireofhyperion]

I have had a lot of fun building this particular kit; especially as one who casually constructs them. I work nights. So, I really only work on them at roughly 4 a.m. to unwind. It is rock solid, and a great addition to my collections. I enjoy your commentary and follow your recommendations. Thanks, breh.

[@r0gu353]

Look can we just appreciate the people that made the box art I mean that looks soo good!

[@qiye3304]

0:04 why do I hear "COOONDOOOOM"

[@xenowreborn]

I hear QUUUUAAAANNNTAAAAA

[@MojCacaSeTusira]

Thank you. Sincerely. You made my life better.

[@digitalfanboy6557]

or maybe Garuda!

[@Lyubilus]

Or GUUUUUUUNNNNNNNNNDDDDDDDDAAAAAAMMMMMM

[@muhamadhafidzbaihaki3083]

CORROOONNAAA

[@MrJacinto0512]

How about some retro reviews while waiting for new kits? You have stuff like Sazabi Ver Ka and RG Mk. II etc that could use a MechaGaikotsu review and grade! Great review as always!

[@allinfidelsmustdie3922]

JJ Jacinto That is a great idea! Let's get this to top comment everyone

[@juancarlosmarquez7231]

I like the idea, he can call it Retrogaikotsu

[@lordykun5995]

I was really reluctant to get hyped or interested on this "re-issue" of the Quata, since.Quanta is one of my liked suits from 00, but when I saw the new back pack for the new saber attachment, and man, the new GN Saber is this good? I can't pass this! Love that sexy v-fin though. Better than the chunky old version.

[@Feryion]

Okay, Bandai, we all love huge-ass swords. MAKE TOUGHER JOINTS GODDAMIT

[@OptimusShr]

6:20 Draw me like your French girls.

[@jameyli2628]

just finished building my 10 years old MG-OO QanT that I forgot I bought it since grade 6...dammm this thing still amaze me how cool it is

[@markersandmemories]

Who's here now at 2023 waiting for Exia 2.0?

[@GayCringeComp]

'24

[@seanjaymacabales6587]

Make that 2024.

[@drip671]

😂😂😂😂😂​@@seanjaymacabales6587

[@ken1102]

Just get the PG

[@michaelfuller7635]

Why the fuck we ain't got one yet is irritating.

[@rejectedmind-1173]

For a kit that came out just 2 years ago, it was the hardest to find available for a reasonable price. Of all places, Barnes & Nobel came through.

[@TheVanillaQueen]

The bottom bit on the backpack part of the GN Drive Can be modded to stay in better. Basically cut off the thinner leg offshoot thing (that prevents the backpack from going all the way on) and you should be golden. Did that with mine and I had no issues with the backpack falling off afterwords, and it slides all the way in like a charm. No glue needed.

[@dsharp2521]

Thanks, this worked when I recently built mine

[@TheRioJesus]

You’re my hero, I was about to buy abs cement and seal it in forever

[@radithramadhan8488]

Finally i've been waiting for this reveiw since you post this kit in your ig

[@royyyhehe207]

6:40 u guys saw it hahahahahhahah

[@SalinaMoonfall]

"a couple of dodgy wing high grades"...oof know those feels from way back.

[@mitchelin02]

6:40 I did that with my good old MG 2.0 Gundam once. I got it smashed into oblivion.

[@huh2340]

I was startled when Setsunas screamed "Gundam!" through eye sockets at the beginning.

[@OtonashiV]

Older molds tend to have more mold lines because the mold has worn out more. The new molds of today will start getting mold lines in a few rounds of reprints.

[@va_anes]

Awesome!! Saw this on ur ig and I was waiting for it.... Keep up the good work!

[@jctv-sq4qd]

I just got this kit from my gf for my birthday and I cant wait till I'm finished

[@MythicalPhoebe]

i'm so sorry gaikotsu. i havn't watched any of your videos for months. i have fallen out of the hobby for a bit but this is bringing me back!

[@AhYung2987]

6:46 < I heard as “it CURRY so much” hahaha

[@dialect64]

Been debating pickin this up but you convinced me!

[@XRaiderV1]

if you have gundam markers, like the metallic set, grab the blue pen..dont shake it(you dont want the metallic flecks for this)and run the ink over where the sprues were attached, where its discolored, then wipe clean with a kleenex. boom. stress marks ALOT less obvious.

[@XRaiderV1]

this method can be applied to other colors of plastic but its my recommendation to color test using the part sprues as the testing surface, to determine the correct paint marker to use.

[@gerardray1232]

You can get rid of stress marks easily actually. Jus dab a little extra thin cemen on the white marks, let dry for a couple of hours, and then sand it. The white mark will disappear.

[@XRaiderV1]

he's right..I've done that too. either method will work.

[@אנונימיתאנונימי]

XRaiderV1 Thanks!

[@אנונימיתאנונימי]

gerardray123 Thank you too, nice to hear they're more ways to remove nubmarks.

[@sofiaciel7599]

Man, I want this! I had gotten the P-Bandai RG kit of this, but having it in a larger scale would be awesome too.

[@alxporrini8563]

I might be getting this on Monday from my local comic shop. They have one for $50 never been opened.

[@cloud2537]

Hoping this kit gets the refresh it deserves with the excellent Virtue, Dyanemous, and Kyrios master grades.

[@shumijin528]

Huh?

[@Desmo25]

​@@shumijin528 he's saying that this kit should get a 2.0 version. This "2018" model is literally just the 2010 kit with the weapon.

[@anggaagasi1345]

after bandai killed his enemy (dragon momoko & daban), he got a change and evolution.. the blue logo

[@TempestFox]

this was the first gundam I got (the original mg though) and I was fairly young so I had no clue what I was doing. but now a few years later I really wanna get this kit and build it again

[@ahmaddanish2854]

My first gunpla is the SDCS -0 RX gundam unicorn(they're terrible)and the 2nd is the HG earthree gundam and 3rd is mg 00 qan t (standard/original)

[@yeetyeetskeetskeet266]

Are you gonna review the Avalanche Exia Dash P Bandai kit?

[@rusrubel1817]

It's blue because it's a new bandai brand. More like a sub brand.

[@theclassicpro8797]

why is gundam 00 just the best gundam series

[@hudsondunne6099]

What kind of decals does it come with

[@ArchOfWinter]

I wish they'd release an "0 Gundam" in master grade!

[@TheWingknight101]

This gundam just showed up at my job today and I remembered you reviewed it but watching it again seals the deal for me

[@Light1of1hope]

The Qan[T] gundam can best be described as the cloud strife of the gundam universe!

[@Disciples0]

Does anyone know how I could order the foil sticker sheet at 2:56? I lost mine and any info given is greatly appreciated.

[@angelicangelic1]

This review is so much better than the one zakuaurelius did. Mecha Gaikotsu does so much justice to how good this kit really is. Zakuaurelius even did the cockpit hatch opening wrong, missed out on the adjustable hip joints, gave wrong info on the right arm armor, All zaku and his viewers did was complain on the weapons design, how dangerously sharp they are, and the proportion. (The proportion? Seriously? MG and RG have the best proportions) That's UC elitists for ya.

[@ianramos905]

I never understood UC elitist, AU is pretty great, Barbatos,00 raiser and quanta gundam were my favourite. While in the UC, RX 78-2, NU and unicorn were my picks.

[@angelicangelic1]

@@ianramos905 I agree with you. I guest UC elitists can't have and acknowledge good things. All while blindly accepting all the bad things about UC with such pride.

[@danielestey7780]

I started putting my together today and found that the pieces for the abb crunch was really too tight. So tight that it doesn't have a abb crunch. I had to squeeze it together with needle nose pliers.

[@Damitsall]

Does anyone know of yoy can just buy the led GN drive and that Seven Swords upgrade separately?,

[@animesoul479]

About to buy this kit to paint. Good to know this is an over all solid kit, minus that loose backpack

[@fathinpurniawan6486]

My favorite gundam! GNT-0000/FS 00 Qan[T] Full Saber. One of the most powerful gundams even until now.

[@who_is_poo]

2:01 if you really look at it it looks like the seven sword and the exia had a baby

[@pathfinder5190]

someone write a fanfic already 😳

[@ThatGreyGentleman]

Got this kit for Christmas, and I DO love it (after some functionality modifications) but is there ANY way to get fixed posing/holding hands? It’s the biggest thing holding this kit back

[@davidtceultra2556]

6:40 Goddamn it

[@markwilliam7475]

Can i put 00 raiser backpack on these? I love the torso but would like to add gn drive on shoulder

[@Eros10722]

Is it sad that when I got this model kit the runner M2 wasn’t in my model kit? Also where do I buy runners for it?

[@9chard_kun]

Is Quanta has fixed hand for handled weapon???

[@y_o_z_]

6:25 EY TRACER POSE LOL

[@kramsogrub8104]

is there a polycaps used on backpack?

[@vinzman888]

Is there a way to switch the LEDs on and off without taking out the backpack? That’s the trouble I’m having now. Thanks.

[@jacksoncamania7045]

Thanks for the review.😀

[@therealnmg]

Uhm can't you connect the GN sword 4 on the other connector like the shield?

[@xyph7r428]

wasn't that setsuna in 00 raiser screaming? Or do i have no memory and im wronh

[@rviejohn]

Master Grade XN Raiser, Avalanche Exia and Qanta Full Saber are part of 10th Year Celebration of Gundam 00 right?

[@mgphyothant]

Which one is the best 00 Quan Exia? Can you make a compare and comparison video including MG kits and metal builds?

[@AuraKnight-kn1ux]

I love swords so this will be the master grade for me one day 😇😇. Kind Regards AuraKnight

[@kyleward6604]

My back piece is so heavy that it will not stay on. Im close to using glue to hold it which sucks. Even the LED units from bandai dont fit right. Sucks cuz this is my 6th MG and this is the only one I have issues with

[@danielfrod]

Can’t wait to build mine!

[@somekid2500]

Full saber = buster sword 2.0

[@casvalcat3546]

@@cocobill0077 How it is even related to above post?

[@keihobbies]

im glad watching this because i have this in my backlog🤔 my 1st exia ever in my stash too

[@v_kly]

Bandai split into 2, the red logo is bandai, and the blue logo is bandai spirits , bandai is focused on kids toy, and bandai spirits is focused on model kits

[@housequay]

Ok I need some help, I have the original MG, and I have the MG Fenice Rinascita that comes with an action base. Does the Qan T come with an adaptor that lets it use this action base? I've got something that I think is right, but it comes off so easily that I don't think it can be the right one.

[@housequay]

I wanted to buy this in the black Friday winter sale, but the postage was £30 when the kit was £28. The original Qan t had £10 postage price, so the extra sword in the Full Saber makes the box big enough for expensive shipping. So I'm just getting the original.

[@naimrozairen4172]

already got this kit. damn im so lucky

[@MaftyNavueErin00]

Well, why bandai just don't make like an expansion for the full saber. If like this, that's just like we have to buy mg OO Quanta twice. BTW mecha, can you please review an hg gundam F91? I want to know what you think about it? And thanks for your review of this OO Quanta dude, I hope you always in success!...😉😉😉

[@winniesuwarni874]

Is it just me?the parts like in the arm joint is a little to thight? I break so many parts on the old kit tho .-.

[@aethansantos8989]

Stunning 😍😍😍😍😍😍

[@mikeejocson8351]

what are the differences between qan t and mg 00 seven swords??

[@jackkJiee]

Have to buy the kit and stand separately?

[@chinhvu6938]

Mecha gaikotsu-san! What do you think when comparing RG quant and MG quant full saber( whithout GN sword IV ). I plan to buy one of them in the new year. which one do you think I should buy? In my my gunpla group in vietnam, everyone suggested that I should buy MG quant full saber because the body ratio of the MG version is nicer than the the RG version. And in fact, I also prefer the mono eyes design of MG( It look so damn cool). But I prefer gunpla with scale 1/144 rather than scale 1/100( for convenience of display and the price is quite cheap for me). What should I buy? please give me some advice, mecha gaikotsu-san. Thank you so much!

[@ggsdude1]

mg 00 raiser or mg 00 qant? which one would you get

[@ezhumbug]

Just bought this for $48 on sale at a bookstore glad i got this MG

[@ArkenHowlVideos]

Can you make the original backpack? I picked this bad boy up while on vacation and gotta say one of the best master grades I've built. I just bought a second one this week and I'm gotta paint and customize it while hopefully having this sit next to my customized mg Barbatos on my window sil.

[@yoeldennissalim]

From this video, i see that Action Base 5 can hold a MG Gunpla with that huge accessories on, correct?

[@nightmare69metalmatt52]

The yellow parts seem brighter then the first kit or is it just me ?

[@CaliburHex]

Is this a p-bandai or normal release cuz imma buy it

[@zannusx]

This is going to look great next to my Exia R3 and OO XN Raiser

[@AAAAnca]

What would it look like if you combine the Full Saber with the sword bits to make a bigger sword / rifle

[@Nyanboii]

Do the green clear parts glow under blue light?

[@sputin1175]

Is this kit out of print nowadays? pretty much everywhere I looked it's out of stock

[@_Caspergers_]

Kinda peeved there's no separate add-on for the people who already have the Quanta

[@adrianmendiola2237]

Can you make a review of pg or mg astray red frame kai?

[@alvinshaw33]

Thinking of getting this kit. Can anything be done about the hands, mods or replacements?

[@haychew]

So the blue logo represents all their products meant for an older audience and collectors. The blue logo also signifies Bandai collectors level quality. If you look at the latest Super Sentai and Kamen Rider toys, the logo is still red.

[@maddymuhat8079]

Is this different with gundam 00 and ace diver.

[@jackkJiee]

Does this kit come with a stand?

[@MiguelRodriguez-im2tg]

I wish more of the 00 MS would have gotten the MG treatment

[@ashamnixiel1274]

God damn them darn mold lines!

[@thelatinoguy]

I saw a guy speed build it and it didnt look like it took too long, and a friend got this for me for christmas. This would take, what, 3 hours to build?

[@jakebanares1834]

It doesn't include the ring effect for the gn blades

[@hiruma4142]

They got an internal rebranding. Basically they moved/merged all the plamo department to/with another one of theirs.

[@wypadkowaprzypadku]

Is it true that with Bandai Spirits all plastic models like Figure Rise Standard are all now gunpla?

[@Erik1495]

Is it possible to replace the hands?

[@philmchawk2940]

which action base are you using for this? the one that came for this doesn't really fit the adapter anywhere.

[@DoubleD96203]

hi MG, do you plan to review the Diver Nami? :) I'm really looking forward to that because it seems that this kit is waaaaaaaay better than the satan fumina

[@kirito12k14]

Could you show how to change the gn boost

[@trietphan2702]

The blue logo are the restock and the new ones