Micra K11 CGA3 - New engine running smooth! - Part 2

[@Steetwal27]

Nice man! Have an k11 to nice to see🤟🤙

[@Burn377]

Looking good! You forgot the turbo though...

[@TheCruise94]

Haha! I’m chasing power NA, no turbo intended!

[@CuriousGamer022]

I bet a 1.6 vtec engine would go well in these micras.

[@SalehKhanaVlogs]

loved the video guys..did you do a engine swap on your red k10?

[@TheCruise94]

Thanks! Yeah I did get a GA16 swapped into that some years ago, but I had help with that one. We didn’t do It ourselves haha

[@SalehKhanaVlogs]

Hopefully going to do a conversion on my k10.. but people are snapping up all the k11s local to me in Birmingham.. need a whole k11 so can get all the wiring looms ect..

[@War94Rival]

4:20 how many ugga duggas ?

[@TheCruise94]

6 Ugga duggas per bolt is the official spec

[@gwiggy8793]

How do you go about getting the engine swapped on to the logbook

[@TheCruise94]

I’ve never done it before but I believe you have to visit a certified garage who can inspect the conversion and give you an approval which you then send off to the DVLA and they change it on the logbook

[@gwiggy8793]

@@TheCruise94 yeah that what I thought mate , I’ve just converted mine and need to do it , hope it’s not a ball ache but from what I know you could get a mot and no questions would be asked just getting it swapped as piece of mind . Great vid

[@gwiggy8793]

@@TheCruise94 you using the standard intake ? Don’t think mine fits since having to relocate the expansion tank to where yours is as batter in way

[@TheCruise94]

Yeah my dad did it before, the engine look identical so I don’t think anything would be flagged up. Also if it’s declared on insurance I’m not sure it matters. The standard intake fits with the expansion tank where it is? I am for now but I’m going to be getting a Gizfab intake I think

[@SimRacerRich]

is that a sportex exhaust system how are you finding it ? i was thinking about getting a gizfab one

[@dominikri.4295]

Hey I’m planning the same project, how you dealing with to ecu?

[@TheCruise94]

ECU stays exactly the same. Runs the 1.4 with no problems, no need to change it!

[@larswouters9838]

Same wireingharnas and ecu?

[@TheCruise94]

Yes. Wiring and ECU completely untouched

[@marcofreitas927]

Can the stock ECU of 1.0 micra run on 1.3 engine? And the stock cables too?

[@momfiethehunter504]

it can, cables should be no issue, the only difference between a 1L 54 and a 1,3 75 engine size and power, there are however 3 different 1L 55hp engines and 2 versions of the 1.3 75hp. the prefacelift 1L was used until January 1998, same goes for the prefacelift 1.3. the preface engines have a smaller flywheel and clutch and have a smaller gearbox that wont fit the facelift 1 and 2 models. the facelift engines have a bigger clutch and flywheel and the gearbox can be fit to facelift 2 engines in theory. the facelift 2 engines are the 1.4 82hp which is a bigger bore 1.3 and a 60hp 1L compared to the previous 55hp 1L engines and use coils instead of a distributeur that then older models use. the ecu from a prefacelift 1L without Nats can be used on the facelift 1 models with some modifications to the ecu. the 1.3 without nats ecu can also be used but will result in less power output for some reason, modification will be required to use with facelift 1. prefacelift ecu's cant be used with facelift 2. the 1.4 gearbox can be fit to facelift 1 1.3 engine and will result in little less fuel usage.

[@Flynn12346]

Hi quick question do polo 6n coilovers fit k11 micra worried won't work in the rear or is it worth buying corsa coilovers

[@Yes-kn6zm]

I use corsa coilovers but im going to find a different solution for the reae springs, the corsa ones fit terribly

[@GST_K11]

Smashed it boys

[@TheCruise94]

Can’t wait to give it a rip!