Micro Roni for Glock 19 after one year

[@tnh723]

adding a sling and suppressor to your setup (using the suppressor capable version) would make it the ideal home defense weapon. nice video! I also have the same optic

[@Endlessvoidsutidos]

right rifle level accuracy without worrying about my round going through the bad guy through the wall and through the old lady next door lol ill take it :D)

[@silvadossantos6803]

Rather use a bayonet as well

[@brian-8674]

To clear up some things. You can get them with out a stock or with an arm brace and without a vertical grip, then you dont need a 200 dollar tax stamp. It is illegal to have a vertical foregrip or stock unless you have a tax stamp and have done the proper ATF paper work. Because of the wait time for ATF background checks and the $200 stamp id go with a arm brace and no foregrip.

[@roggie77777]

if it is longer than 26 inches then it is a AOW and can have a vertical grip and still be a pistol.

[@EquipaPatriot]

You do not need to apply for the tax stamp before purchasing the Roni PDW (the model you have). The tax stamp will only be necessary if you plan on mating the pistol with the Roni PDW. So, I have a Glock 17 Talo Edition. I can buy the Roni PDW for $250 from an internet site, which is the only way, since gun shops in my area are only able to order the Roni with the arm brace, and the Roni PDW will be shipped directly to my door.

[@ravendon]

You don't need an NFA tax stamp unless you have a stock. If it's the SIG pistol brace, it's legal with no additional paperwork.

[@brian-8674]

Progressional also the vertical fore grip. If it didnt have a fore grip and had a brace or nothing back there then it wouldnt require a tax stamp.

[@ZarkowsWorld]

In US, the land of free, it is restricted. In Sweden it is license-free.

[@Brandon-gq4kb]

What about the fore grip? Would it be legal because it’s not a true 90° ?

[@Franiveliuselmago]

I can confirm the Micro Roni is legal and a non regulated item in both France and Argentina.

[@MegaMapper]

Well... in my country gun law is really restricted so micro roni is nice alternative

[@Re4pZz]

In germany its free to buy even without a permission cause not a part of the gun And it doenst change the pistol to a sbr or whatever

[@lovilimon]

Spasibo za vidos, ochen polezno

[@TheMarkrobinson1988]

Good looking project

[@Veldtian1]

Great acoustics at that range man, sounds like you are using that artillery on them!

[@diegovelasquez7981]

HELLOO from Peru...I have exactly the same Micro Roni, you think that if a cut with a dremel the side where it`s the slide retainer, can used with a glock 19X?...I hope you can help me or somebody. I would appreciate it

[@JLawL]

If you have the velcro stock it is NOT an SBR. You do not need a tax stamp for this stabilizer unless you remove the velcro or buy the nfa stock.

[@Brandon-gq4kb]

if you replace the stock with the stabilizer would it still need a tax stamp because of the vert fore grip ? Or you won’t because it’s not a 90° VFG ?

[@prepsho5007]

Did point of impact change if You will squeeze really hard roni but pistol ever harder on one side? Roni not gonna twist but glock can just a bit, but on 25 m can that be something to be awere.

[@WhoDeanyUnchained]

Your gun is so clean

[@ronaldprovencher7570]

What type of problem CAA did you have ? What the HellCat MCK? did you have the cocking handle lifting up off the slide ??? i reported it and never got a fix for the problem

[@prisoneralex2752]

Your front site is backwards lol

[@blacklotusgym]

Nooo it’s aerodynamically tactical

[@petergriffin8934]

''Pimp Up Your Glock'' That is a better name for the product.

[@lowbatt3235]

lol

[@jeffroze5955]

This is Gen 1? Can you remove the shroud and fix a surpressor?

[@katahajimeudegarame2397]

i have this one, the new MCKs not looking the part for me, too toyish, Ronis are better, its better to leave your glock stock, if you customize it (except for the trigger obvioslly) you may have problems with the roni.

[@PJS50]

On the one that failed, did the spring alone just fail, or did the entire plastic locking bar crack/break? I have had an issue with option #2 (locking bar breaking), but I am also using a Glock22 in the chassis, which is the snappier recoiling .40S&W of course...

[@MrZRNEC]

No it didn't break just the spring failed, it's still usable if i hold it extremely tight and use less powerful ammo but annoying as hell the newer version has no problems

[@leovazlobo1631]

mac roni

[@everettthoman2097]

Your front sight is backwards

[@akallday504]

Everett Thoman true

[@Sakitsunebi]

In Soviet Russia, front sight backwards you.

[@brandong7201]

Good video 👍

[@miroslavfiala4961]

Nice review. Do you think you could get a little better accuracy if you shot a bit slower? Greetings from Czech rep.

[@MrZRNEC]

Absolutely you could get better accuracy! The best i can personally do is a 3 cm group of 5 shoots if i take my time, while my friend for instance can do even better. Long story short accuracy is in the shooter, not the weapon.

[@karlvanrooyen7402]

Can you buy new charging handles. The one I have is worn and doesn't lock onto the slide anymore.

[@MrZRNEC]

I'm sure you can just contact the manufacturer or the store you bought it at

[@SargeJTQ]

Why not just buy a 16" glock barrel for like $200? Wouldn;t that eliminate the need for the tax stamp?

[@orion8981]

If you're going to do that, you're just rolling with a carbine and eliminating the compact nature of it. There's a whole lot of great options for carbines that aren't pistol calibers. Get an AR. Best option is with the brace. ATF ruled you can shoulder it without spending 5 to 10 in the slammer, so go for it.

[@SargeJTQ]

Keep Calm and Call for Fire I have an AR that's 20", and a 16" AK. I wouldn't mind having a handy compact gun that converts my pistol into a carbine. Cheaper and funner to shoot, while having the option to go to a smaller barrel in the future. There's many benefits to having a pistol caliber carbine, especially one as small and light as this.

[@WickdPerfekT]

What is that silver attachment on the right side rail when you're in the range?

[@MrZRNEC]

that's a gopro mount =)

[@Macintosch1000]

Switch for automatic shoting..?? 😊

[@guardiegiurateitaliane]

Can you use this roni with a glock19 fto ???

[@glockpoppin]

Front sight on backwards

[@250rapid]

Maybe because of the gas block?.. I don't see any issue with backward mounting a front sight, it would still do the job.

[@tylerleeforeback2652]

Is the magazine well in front just a slot for the fresh magazine?

[@Newtons_Ghost]

Dalton Foreback yep. Spare mag holder.

[@jason200912]

if you do a mag burn of 90 rounds as fast as possible, will the glock frame warp?

[@homoclubitus]

Nope

[@MrJamesIkanov]

pretty sure your Front Sight is backwards dude

[@jaimeluevano149]

Doesn't seem like it.

[@MrJoshcc600]

Mine still doesn't hold zero if you take it out

[@shesaidwhat2570]

Will a polymer 80 work?

[@Ok-551]

Does it scratch your gun? Thank you.

[@MrZRNEC]

no, it just makes it more dirty

[@pedromalayan6223]

How much it cost

[@earlcraney5467]

Is there a micro roni made for a desert eagle?

[@MrZRNEC]

not yet

[@calogerorodofili7515]

Thank you for your clarifying video. I am waiting to arrive my gen 4 micro roni fo rGlock 19 5 gen, hope arrive soon. I already bought sights from Macpul and Holosun red dot. I would like to ask you, what do you think about buying a muzzle extension devica?Best regards, Calogero

[@benjihilliard1755]

Just curious about the red dot, the guy at Sportsman Warehouse told me that putting a red dot on it is illegal unless it's a pistol kind of red dot??? You know anything about that??? I feel like he doesn't know what he's talking about!!!

[@shockwave._.8098]

Why does the top one has an ar 15 carry handle???

[@MrZRNEC]

I don't remember anymore probably i didn't have sights for it and was just using it for sights

[@shockwave._.8098]

Oh ok

[@AsimKhan-kb7us]

How much your Micro Roni please

[@mychalmorris9928]

Wrong !!! Does not need a tax stamp, it's not considered a SBR since it's does not have a stock or a barrel longer then 10 inches, nor a vertical forgrip to it, but does have an arm brace. This does not qualify it as SBR. Please stop putting out misinformation...

[@Jonathan_Knight]

"Eats ammo like cupcakes"...had to back it up just to hear that line again...lmfao!!!! oops!! this is NOT an NFA firearm...it is NOT a short barreled rifle...it's not even a firearm until you put the pistol in it...so that is incorrect.

[@genegene8686]

What do you mean? Sure, without the glock it’s not an sbr or firearm but it does turn your glock into an sbr since this is the folding stock version. Only the stabilizer version avoids the reclassification when inserting the glock.

[@Jonathan_Knight]

@@genegene8686 It's still a pistol with an armbrace..you know SBR doesn't stand for short barrel pistol.

[@genegene8686]

@@Jonathan_Knight He clearly is using the SBR version, there’s a folding stock not a brace, which you can see as he’s rotating the Roni. A pistol arm brace requires your arm to nominally be able to be, ya know, braced, which you can’t do here.

[@genegene8686]

@@Jonathan_Knight But don’t take my word for it, the manufacturer and inventor even explains there are two different versions of the roni at 1:30 kzbin.info/www/bejne/jKqqn6aChJulers

[@ijoeputa7306]

Jeez thats a lot of plastic

[@andreykomorov7210]

sLOVEnc how can I contact you by email?

[@MrZRNEC]

Why do you want to contact me ?

[@andreykomorov7210]

I'm the marketing manager of a worldwide distributor of tactical equipment, such as the micro roni, I want to talk about product reviews.

[@mikerolli9469]

This reminds me of a honda civic with all that plastic bull$hit that makes it look fast, but really makes it no better than stock. With the $ you spent on those extras you could have purchased a more accurate/reliable weapon (Sig/H&K). ..To each their own, waste your $ anyway you want.

[@ZarkowsWorld]

Different license. Very important (outside of US).

[@kenthannivig9595]

Agreed you would be better off just buying a keltec sub 2000 and accomplish the same thing

[@ZarkowsWorld]

kent >> Dumb comment - Kel-Tec SUB-2000 is a carbine, i.e. under a difference license-class in most countries.

[@homoclubitus]

Imi kidon Is BY FAR better sbr option