Saw one of these F Models up close and running. Extremely small, loud and maneuverable.
@andreaserna95038 ай бұрын
Because of you I starter painting my models by brush. I'm keeping rewatching your videos to learn how tò paint by brush and God you are very very very good at It.
@brushpaintedmodels70868 ай бұрын
Glad to hear that! Thank you.
@matrixbadger3 жыл бұрын
Fantastic work, very impressive that you can get this level of quality by brush painting.
@brushpaintedmodels70863 жыл бұрын
Thanks again!
@jeromeovigne45492 жыл бұрын
I'm starting to learn airbrushing, but I believe I will try hand-brushing acrylics once more, after your excellent video. Cheers from France.
@brushpaintedmodels70862 жыл бұрын
Decent results can be achieved by hand brushing, but airbrush quality will be superior. Cheers.
@richardb6202 жыл бұрын
Really interesting vidéo about brush technique. Good job
@brushpaintedmodels70862 жыл бұрын
Thank you!
@wlovett42 жыл бұрын
Masterful! Paint job and panel lines are quality. Enjoyed the process and the finished job. Inspirational. Thanks and kudos.
@brushpaintedmodels7086 Жыл бұрын
👍
@josecesar16393 жыл бұрын
Beautifully done.
@brushpaintedmodels70863 жыл бұрын
Thanks!
@zsoltkonkoly12502 жыл бұрын
Very good working with brush
@brushpaintedmodels70862 жыл бұрын
Thank you!
@paolomonachello53432 жыл бұрын
Very good , without airbrush! Ciao from Italy
@brushpaintedmodels70862 жыл бұрын
Grazie!
@Sintarzus2 жыл бұрын
Excellent video, thank you so much! Was thinking about buying this kit. As someone relatively new to the hobby, with two finished models and no airbrush, this video filled me with a lot of confidence.
@Sintarzus2 жыл бұрын
P.S. I want to ask your opinion on tamiya acrylics. Are they any good for brush painting? Zvezda paints are hot garbage, with zero adhesion.
@brushpaintedmodels70862 жыл бұрын
Tamiya acrylics are high quality paints, but probably better for airbrushing. They are alcohol based, and dry fast. Honestly, I haven't tried yet to paint a whole kit with Tamiya acrylics, only some smaller parts, but it was fine. If you give it a go I would add a drop or two of X-20A Thinner, to have better flow and prolonged drying time. Or maybe even a paint retarder, I have in plan to test it. Anyway, Vallejo Model Color and Revell Aqua are great paints for brush painting, they are water based. Make sure you apply a primer before painting, it helps a lot with paint adhesion. Or at least wash the model in soapy water before painting, to get rid of grease from it's surface.
@chancerNW3 жыл бұрын
That is excellent neat work. A great looking Mig 17. Well done. I have just found and subscribed to your channel.
@brushpaintedmodels70863 жыл бұрын
Thanks! Appreciate. 👍
@henrysanchez48102 жыл бұрын
Very nice, excellent build..
@brushpaintedmodels70862 жыл бұрын
Glad you like it!
@kennethjames94163 жыл бұрын
Very nice indeed.
@brushpaintedmodels70863 жыл бұрын
👍
@josealejandroalvaradobotei85843 жыл бұрын
Excelente video desde chile gran trabajo a mi también me gusta los aviones y el aermodelisno 👍
@brushpaintedmodels70863 жыл бұрын
👍
@emptycloud86693 жыл бұрын
nice video, thanks
@brushpaintedmodels70863 жыл бұрын
Thanks!
@emptycloud86693 жыл бұрын
Subscribed
@brushpaintedmodels70863 жыл бұрын
👍
@thedubstepaddict36753 жыл бұрын
QUICK TIP: Allways put glossy black under an aluminum color! It greatly enhances the shine.
@brushpaintedmodels70863 жыл бұрын
Thanks for the tip!
@alessiodecarolis3 жыл бұрын
A nice little fighter, other than the classic NM finish there are a lot of paint schemes, expecially middle eastern & vietnamese
@brushpaintedmodels70863 жыл бұрын
Good point!
@joonaslehto4356 Жыл бұрын
I WOULD LOVE TO DO IT TOO
@routman282 жыл бұрын
😱😱😱 !!! 👍🥇🏆
@brushpaintedmodels70862 жыл бұрын
👍
@doncossack10163 жыл бұрын
I'm new to model building, so forgive the dumb question. You don't have to use a gloss coat prior to decals and wash?
@brushpaintedmodels70863 жыл бұрын
You don't have to, but it's good to do so. A gloss coat will seal your paint, and make the surface smooth, so the decals will adhere better to it, and your wash will flow in the panel lines better as well.
@akiyamato32993 жыл бұрын
I have the exact same issue with that missing afterburner part, thought was a single case, also I cannot understanding why did they separate fuselage into to two pieces, requires even more time on building and sanding
@brushpaintedmodels70863 жыл бұрын
Thanks for the info!
@Sintarzus2 жыл бұрын
Zvezda engineers love to overseparate their kits
@rtplayer35432 жыл бұрын
Great work , great channel. Subscribed!
@brushpaintedmodels70862 жыл бұрын
Awesome, thank you!
@panzersrak82013 жыл бұрын
Hello! You've got a beautiful model! How did you make sure the plane doesn't fall backwards
@brushpaintedmodels70863 жыл бұрын
Thanks! You have to put some weight into the nose section. 10g according to the instruction manual.
@panzersrak82013 жыл бұрын
@@brushpaintedmodels7086 Thanks!
@user-us8xz1gu1d3 жыл бұрын
Well done, but i recommend you using paint retarder for metallic paints
@brushpaintedmodels70863 жыл бұрын
Thanks. Yes, some retarder can be beneficial to slow down the drying time of acrylic paints, if it's warm and air humidity is low.
@michaelleftwich81863 жыл бұрын
Reminds me of the F86 Sabre. I think that was the number of it. I could be wrong. Let me know if i'm right. Thanks
@brushpaintedmodels70863 жыл бұрын
It's predecessor the Mig-15 and the F-86 Sabre are from the same era.
@chrisobrien62493 жыл бұрын
Looks great. I'm going to make the model yet it won't look that good :(
@brushpaintedmodels70863 жыл бұрын
Thanks! You can do it! Mine ain't perfect either.
@chrisobrien62493 жыл бұрын
@@brushpaintedmodels7086 yeah, you have great skills and tools ( I don't even know hoe to use primer or that stuff for the lines or decalfix). I will make a video if I complete it
@bobbob46523 жыл бұрын
Not bad, but why not use an airbrush?
@emptycloud86693 жыл бұрын
it is really expensive for me, so i think he has the same problem
@brushpaintedmodels70863 жыл бұрын
I have a few reasons, but no short answers...
@constastar1660 Жыл бұрын
Huh, the casting issu is weird, as a Zvezda main that made in total 79 zvezda models ranging from sizes years and eras ( as in old sets and sets about old and new tech ) this casting problems is…… weird, usually there are some priblems with casting but to the outside that you have to cut iff, on de other hand there is a problem with wings nor fitting onto older one wing designs where the underside of the wings is a separate part, and sometimes there’s like 3/4 mm and so….. putty
@qweqweuu Жыл бұрын
оставляю послание новичкам - у этой модели (весь) стабилизатор клеится хз как на глаз, так как нету направляющих, тупо люфтит место склеивания, лучше купить миг 15 или от других производителей