How to Install Quick Release Bumper Fasteners

All-Fit Automotive Link: allfitautomotiv...
This KZbin Channel: / @milanmastracci
SickDips KZbin Channel: / @sickdips
______________________________________________________________________________
** I DO NOT TAKE RESPONSIBILITY FOR YOUR VEHICLE BEING DAMAGED ** THIS IS FOR ENTERTAINMENT PURPOSES ONLY **
If you do not choose to get touch up paint, your steel fender will rust given an appropriate amount of time, especially in environments where Salt / Road deicing products are used as they will accelerate the rust process. I STRONGLY recommend spending the 20 bucks or whatever it costs to get some touch up paint.
Don't forget when you drill into your bumper and fender, MEASURE TWICE, DRILL ONCE
______________________________________________________________________________
Things You’ll Need
The Quick Release Fastener Kit
1 x 1/4” drill bit
1 x Electric drill
1 x 3/8 Socket
1 x 5/32” Allen
Some Masking Tape
Necessary Tools to Remove Inner Fender
Touch up Paint
If you guys have any questions, please feel free to post in the comments below.
______________________________________________________________________________

[@hekthic]

I drilled a hole through my tire

[@swingking08]

Probably don't work on cars then

[@EbolaSquirrel]

ehh its fineee

[@Josh-zy3lq]

LMAO

[@whatistime5768]

Your doing it wrong bro... you have to drill a hole through the engine, not the tires

[@LaloVega21]

Why am I laughing so hard at this 😂

[@ndk2k4]

If I put this on my Mustang, will I be more effective when ploughing through crowds?

[@milanmastracci]

+ndk2k4 ABSOLUTELY :)

[@66Tinchoo99]

lol

[@hawkeyestiguy]

😂😂😂

[@americanpanzer4163]

I would also recommend quick release front fenders and a quick release hood to to hide the damage

[@silkboxing4454]

I installed these on my Ex Girlfriend"s •Dairy pillows• when I use to slide my "one eyed yogurt slinger" between them !

[@Slrce]

i’m so late, but this was actually one of the most educational videos i’ve seen, super well explained, very clear, and from what it sounded like… you knew exactly what you were talking about. amazing.

[@KalvinTheChuffleMan]

3:17 “ it’s gonna be in this genital area “ 😂😂😂

[@JesusMartinez-xf8rs]

That shit took me out 😭😭😩😂

[@shogoberik]

bro 😭

[@jrmyadventr]

Been thinking about these for a while, old mount points broke and I've used bolts with nuts, but removing these are a pain, so these are going to make more sense

[@carlmeaux3518]

looks like you dented the fender putting that much pressure on the drill

[@Sp4rks]

Carl Meaux yeah wouldn't you want to use a stepping drill technique?

[@RAF92Warhawk]

Yes, I would drill it with a much smaller bit first for better accuracy. It's also a good idea to de-burr the hole so there isnt any metal shards interfering with the fitment of the washer/ bolt. Also, like Carl said... way too much pressure on the drill. When the bit fell through, he put a huge dent in his fender, which was visible for a brief shot in the video. It's a small mistake, and the actual quick release probably covered most the dent, but it can be easily avoided by just modifying the technique while drilling.

[@ieatass6463]

@@RAF92Warhawk lmao who gives a fuck its a crappy focus

[@monyaseymour6211]

This is a quick and easy extremely inexpensive way to solve my front and rear passenger bumpers POP off, eliminate tape and no expensive replacement, this car will be with me until it can not be repaired. 2011 ford fusion this car has been so durable, we went thru a high hilly pastor, like the Dukes of Hazzard not a scratch just those 2 spots of bumper popped off that's it. (It was an accident, ran off road)

[@edcashwell5723]

Great video, I wasn't a fan of these, but then you mentioned the fender gap, a lightbulb went off!! Nice job!!

[@milanmastracci]

+Ed Cashwell Thanks Ed!!

[@s.lawrie8466]

First of all, great vid m8. Was looking to see what these look like on different cars. They look good on the Focus. Secondly... and I hate to sound all critical... But you shouldn't apply that much pressure when you're drilling paint work, more specifically metal work. You can even see in the video that the panel was flexing, and left a dent after the drilling. There is no reason to do that. Just let the drill bit do its work, without excessively forcing it into the metal. Pressure applied should be dictated by the strength and hardness of the material. For the most part (on bodywork at least) a lower pressure should be applied. I see people forcing drills into material all the time, achieving nothing other than making the drill bits slip in the chuck, doing damage to the material or drill and making everything overly hot. Also, just an idea, drill a smaller pilot hole first to reduce the potential for slippage and denting of the metal.

[@supremius]

lmao i realized this the first time when i saw that drill slam tge fender i was like oh yeah you got it good and later on i seen the dent 😂

[@jatiyo543]

+S. Lawrie and debur the hole with a duburring bit or larger size drill bit once the hole is done.

[@lancetenhoopen1006]

Thanks for adding that information. I was thinking the same thing but you articulated it very well. +1

[@GogogoFolowMe]

I recommend to use a smaller drill bit to begin with

[@sethschneider1504]

the fact that you did this just for looks gives me a migraine

[@kanyewestlegoguy7443]

Seth Schneider for real Hahahaha I’m over here learning how to put these on to keep my fucking civic together 🤣🤣

[@julianpat6146]

I’m doing this to my e46 because the bumper is sagging and it’s slammed

[@biggaywizard]

You've never been to Japan and seen Japanese car culture have you?

[@HIGH_AF914]

@@kanyewestlegoguy7443 😂😂😂 me to

[@daviclemons6910]

Well if he ever did wreck the front of his car he wouldn't have to worry about the bumper falling off in the process.. 😅

[@Bigshockd]

Outch! Huhuhu i need to drill my flawless panel to fix the bumper huhuhu

[@royaltrunks8003]

🥲🥲🥲

[@HoaPham-zs1mh]

Omg yes, I didn't know this existed. I have a gaping bumper and this is perfect!

[@milanmastracci]

Hoa Pham This will fix it 100%. Make sure you stretch the second fastener far enough so you have a tight fit and it brings your bumper up

[@KyleHertelVlogs]

this focus is no longer alive. a friend of mine purchased it, and it was unfortunately wrapped around a pole. i own that front bumper though and the grille.

[@user-qj2cq4dv3k]

Noice

[@cam-den]

love the hellas

[@hawkeyestiguy]

Great install video. 👍🏻 Personally I like the clean appearance of Quik-Latch fasteners, but this is a great install vid none the less. Very detailed & well presented. Just subbed! 👍🏻👍🏻

[@Contract32Killa]

It's so funny to see these range from $3 to $65.... I picked up my set for $4.99 shipped of eBay. I can't imagine the suckers who spend $65 for these things lol

[@FujiShiina]

Same people that spend most of their money on "real" wheels and think it makes their car better

[@gagepetas7748]

Fujiwara Shiina u realize that wheels and price do matter due to the shape and weight right smh. Don’t pretend to know something if u don’t

[@FujiShiina]

@@gagepetas7748 i had 3k+ wheels, now i have rota's my rota's are lighter n stronger... Hmmmmm...???

[@gagepetas7748]

Fujiwara Shiina lmao your car is worth what 2k tops stop it lmao my m3 e46s body kit is worth more than your whip lmao chill out

[@FujiShiina]

@@gagepetas7748 ok big boi, my coilovers are 2k on it's own... The car was 1500 as scrap that did not run or even have any interior in it. It goes for 7k+ anyone with a build corolla can confirm it's fcking expensive to drift them

[@garbajful]

wait did you just install that for looks cuz I didn't see you actually "quick release" your bumper?

[@thesteezylifeofdrew]

Nice video. Good quality, very understandable, and to the point. Helped me out a lot!

[@milanmastracci]

***** Glad to hear :)

[@mkiss879]

it hurt me a Lil to watch him just drill his fender like that

[@chriselson7268]

Yes I agree. He should have started with a smaller drill bit first and took his time. The final size should have been even slower to allow the metal to acclimate to the heat and pressure of the bit.

[@fachinimichael]

It's a focus... Lol

[@ieatass6463]

Who cares.

[@jackmeltsner437]

what do you use the 3/8 socket for?

[@ruthannwalker5585]

Wow you explsin things plainly to the point. Thanks

[@erickmarte5294]

Ok but how is the video quality this good and the presentation being an 8 year old video

[@Rudeboymo]

Very good video. Straight to the point, easy, and thorough!! Good job 👍

[@SMEGEL145]

Do you think this would be strong enough to to hold the bumper to the fender without any other things supporting the bumper?

[@Blackeyemofo]

If your bumper is hanging a little and ya need to bring it up, would it be better off to start on the bottom and then pull it up

[@XxGreenBeXx]

My first thought: this is extra af you don’t need it After watching this vid: I would give it a try

[@KalistaPierre]

Bro best video on this install I watched it and added 2 on each side and I’m so damn hyped thanks a bunch! It’s first time ever modifying anything and I’m a very feminine girl I didn’t even break a nail!

[@John-dt4tl]

How does this help release the bumper at all? That just added more stuff to do to release the bumper. If that is all that's holding the bumper up that's a shitty thing to trust.

[@DriftAndGrip]

+John Meyers i think you only use the rings to hold it on

[@Benni87909]

Because you wouldn't need the other bolts down the sides to hold the bumper on. Obvious.

[@braygensmith2341]

Joan Jacobo not really. I have a slammed car and I’m going to use it so I can take off my front bumper fast so I can get over certain bumps or stuff. Also easier to jack up the car

[@YungSteambuns]

There is literally two 10mm bolts in each fender holding the bumper in place the rest are just built in clips (at least on toyota/lexus )

[@djesenic]

Yung Wad i have 6 screws on the bottom of the bumper, 4 from the top, and 1 on each side - Lexus

[@mrcoffee315]

Look people that’s for when your clips that hold the bumper breaks off or you have a title bad fitment on your bumper and fender so you put it to pull it up and reduce that gap

[@ghosthxer7301]

How does that make removing your bumper easier? Can you make a video of you demonstrating the removal of the bumper after you've FULLY set it up for quick removal? I have a car I bought a 10 piece kit for because I am certain that these are the fix to my hanging bumper. The clips and lining where you put the bumper attachment screws and plastic inserts in are all messed up. I'm going to hammer out all the dents as good as I can and then I'm gonna try to see if this is going to be a good fix by just hanging the bumper to the fender. I will also be doing a video

[@_blazin_asian]

Man, you don't push the drill through. I've always entertained the good 'ole christmas tree bit especially for the metal fender, the plastic bumper doesn't matter as much.

[@richardvega2063]

I do it to the something lowered or for racing. Because the only reason to do it is because the bumper gets in the way of the radiator 😊

[@joshuaravel]

Awesome I've been looking for these for a while... thank you so much!!!

[@thelofipanduh8589]

Straight to the point. - thanks dad

[@BrandonJBlanco]

If you ever get your hands on an Accord LX-S, please do a tutorial on how to install fog lights. Many LX-S owners would appreciate it! (LX-S doesn't have wiring harness)

[@ScreamerPipeTurbo]

Same, He owns a Accord coupe but idk if its a LX-S or not.

[@milanmastracci]

PolskieBMW I installed some fogs on my EX-L i4 but fortunately there was a wiring harness. It was pretty easy to install

[@Zephieish]

Surprised this guy still posting videos since whiplash casting.

[@MrTiggerr84]

Thanks-great video great speaking voice. I've been trying to figure out what to do with my 02VW jetta front left bumper now I know how. 👍😊

[@arrowstheorem1881]

How is that able to release the bumper ?

[@urbansolis]

Gonna use this on my car to hold up my hanging bumper lol

[@MNerestant83]

Did it work out?

[@urbansolis]

@@MNerestant83 yeah lol

[@havenmaltry4517]

Wanting to know, if I already have a replacement bumper, and just want these on, will it be strong enough to hold? And secondly? The bumper doesn’t have to be on to install correct?

[@ryanm7449]

Will this help if my bumper clip broke? My bumper side by the fender line flaps when driving on the highway

[@I4NI_]

tell dad he's got good taste in the quality of tools.😉

[@dannyboii541]

My rear bumper fell off, do you think these quick release fasteners will be able to hold it up, atleast till I buy a new bumper

[@braisonbalthazar]

The number one reason is not looks the number, it’s because when you lower your vehicle it makes it much harder to jack. So you make it quick realize to get more access to a lift point. If the fender liner is installed does that mean you have to take the fender liner off everytime ou wanna take the bumper off ?

[@loganhall5580]

So after you install these do you remove al the factory bumper clips around the bottom and inside the wheel well? I'm just curious because I have a stock Subaru impreza; I'm trying to simplify my method for changing headlights because you have to remove the whole front bumper to access the housing... Horrible design... Would you be able to use just these quick release fasteners and just ditch all the factory clips? So next time I need to remove the bumper you just pop off the bands and you're good to go?

[@BrianSSH]

I'd recommend at least having the clips on top left on or at least a few if you want to live that life. At the end of the day it's all about how secure do you want your bumper to be when there's pressure on it from driving

[@itspringles6506]

Just got a 2013 Nissan altima 3.5sv..... Happy as shit

[@itspringles6506]

its ehsan altima now

[@kevlinarchary3209]

Sorry guys so do you still.need to have the rest of the screws in the bumper ? Looking for a way to permanently remove all screws and have the bumper quick release off my polo any ideas or advice ?

[@TheRoadtoFinalLight]

Great Job. Very precise explanation. Thanks.

[@HAUNTS360]

Its also to hold the bumper after cutting the joint that stick out on the inside so the tire doesn't rub on it.

[@Hopzy0]

Could I use this for my rear bumper? I was towing and accidentally jack knifed my bumper and it stick out alittle bit. Could I use this method?

[@Its_Drew]

So you don’t need to put any fasteners in? My Honda has the clips and fender screws so I’m guessing just clip it in and out the screws back in.

[@agentcatalan8454]

I have a quick question. My whole bumper fell off and I have it holding by these two black strings I bought. If I manage to buy these fasteners will it hold the whole bumper ? Please reply I need an answer before buying them guys appreciate it

[@LaRosie11]

Gay

[@agentcatalan8454]

+Rosmery Batista lmao

[@felixtrinidad793]

Does this work if your bumper is like dragging on the floor after a car accident and don't have the money for repairs?

[@KevinAlexander-os2ok]

What can I use for the rust ?

[@fedrick77]

Very helpful video two thumbs up

[@zachlaraquel796]

Can i remove the bolt and nut that connects the bumper to the fender after i installed this?

[@jasonwilliams6087]

New invention called a pilot hole

[@geraldcox9404]

Hello I just ordered mine a few minutes ago thanks bro can't wait to install them my bumper keeps hanging off a little bit lol

[@milanmastracci]

Gerald Cox Let me know how it goes!! :)

[@geraldcox9404]

I just put my quick release bumper fasteners on today u made it look so easy lol. It looks good but there in different spots on each side pretty close but not in same spot

[@milanmastracci]

It took me about 2 hours to do the entire install along with recording the footage, just for reference.

[@geraldcox9404]

Oh OK

[@cryxbaby2250]

Will this actually help hold up and close bunoer gaps?

[@breneeewing8142]

Do they help with the gap between the headlight housing and the bumper?

[@POZIVZII]

Igh I tried it but my drill isn’t drilling a hole but it’s making a mark is it not sharp enough

[@mercyrain89]

Thank you! Great help and great video!

[@n8rad3]

So how do I keep the O-rings from getting destroyed by nature?

[@TheWheelLifeChad]

+n8rad3 you don't. You'll just have to replace the bands every so often

[@chosanjuan]

Save the rubber for track days for quick release. Use a high quality zip tie if you DD you car. Don't cheap out!

[@n8rad3]

Fred San Juan Zip ties are about as cheap as you can get lol

[@chosanjuan]

n8rad3 true, but there is a clear difference between cheap zipties and not cheap zipties! Cheap means you will be driving over your bumper after a good bump in the road. 😂

[@pawpatina]

BWAHAHAHA TRACK DAYS??? you mean mall parking lots...

[@modernsportscarsofarizona7559]

Thanks for this. It’s what I’ve been looking for.

[@LaydzGaming]

Would this also work for a fibreglass bodykit? Not sure if the pressure would destroy it?

[@aldo3741]

gotta say looks way better now man 👌

[@Gabriel-h5i3e]

Now it's part of the library Walk family

[@AndresGarcia-rm6el]

What do I do if the back part of the hole is not flat but flowers out the metal

[@poncho828]

My bumper clip broke off so I'm installing this.

[@ib3astzz808]

Same we just caught bumper lip on ground and one has fully snapped

[@poncho828]

@@ib3astzz808 I just installed it on my mx5 and it was really easy.

[@jaytea4093]

Same

[@juliaisabella3000]

I don't understand why you didn't take off the plastic bracketing

[@MyLonewolf25]

Using something like quik-latches work much better and is much cleaner

[@NHSSHINOBI]

Great video, was easy to understand, thanks

[@abdelmajedmohammed5263]

Very helpful, thank you!

[@MarvinStolk1997]

our citroen ds3 on the right side the bumper clicks every time out when i push it back it wil stayy until it clicks out again will the bumper fasteners help from click out again??

[@nousername7582]

I gotta do it cus the clips on my bumper broke so they coming off, hope it looks badass 😭

[@lmh-mv3ec]

Hi is this fastener good for PU material bumper? because i wanted to remove my bumper to fit in a turbo kit but the machanic that installed my aftermarket bumper warn me that the bumper might crack if they remove it... so was thinking if this would do the trick after i remove it. Thanks for the informative vid.

[@vstillz94]

So with this quick release you don’t need those plastic clips underneath the hood that’s holding the bumper and underneath the car just those fasteners 🧷

[@tcseacliff7719]

shouldn't you then, remove the nuts and bolts holding the bumper to the fender? what was the point of not taking them out ?

[@DarkDashes]

Can I do this if my bumper is fiberglass?

[@chaseloudon4652]

I take the term "rice" very seriously but this car is "riced" look at those headlights.

[@kwbalance108]

Those headlights are race inspired?

[@rudynguyen2011]

I have a Nissan Skyline,, you think I should do that too???

[@user-jx5rv6bn8n]

Rudy Nguyen What generation?

[@averyclements1110]

What did you touch up the paint with

[@EyasAZ]

hi, am just wondering, do you do any videos on engine tuning??

[@bdude2010-BXD]

how is it quick release if the bumper is still attached to the car?

[@Masoncakes97]

How well do these things actually hold the bumper on? It just seems very loose and not supported well. Isn't the bumper heavy?

[@milanmastracci]

+Dan Gleesack They hold up no problem. The tightness of the bumper is just as good as your installation. Its as simple as that.

[@ripkobexnip3719]

do u have to put paint?

[@trevorrnicholas7114]

Keep over sizes zip ties or extra bands in you car if you’re slammed with quick release. The bands bust a lot

[@dabussy6001]

I ripped the clips off the driver side front bumper and it’s hanging 😭 I got 3m tape holding it flushed but I need one of these now lol

[@JK-zu3lp]

Thanks for the video!

[@aepietriyk123]

I did my doors. All 4!!

[@youngruble1755]

This was a really good video thanks

[@deandempsey264]

Well done that is 7.11 minutes ill never get back

[@savagegames403]

Good thing my car decided to do a fender liner delete while on the highway. So i skiped right through the "pull back liner" part.

[@MrStlover99]

hey, good video but your bumper is still fastened down by push pins. I thought this was first bumper that were hanging

[@feliciavillarreal6598]

Where did you buy these at?

[@splashjayy]

Where can I get some Honda brand touch up paint??

[@milanmastracci]

RegalKane The Honda specific touch up paint is only available at Honda delearships, however you should be able to get a touch up paint pen similar to this at your local canadian tire or even wal mart.

[@CHart45]

Is it frowned upon to install them on your rear bumper?

[@milanmastracci]

No not at all. If your rear bumper is sagging or is very low to the ground and scrapes, I would think its a good idea. You wouldn't want to leave behind your rear bumper going over a bump lol

[@a.n3947]

u make gud videos mate gud job perfect for learners

[@milanmastracci]

+Islam for everyone Thanks man :) Glad you like em!!

[@HardRockRecords]

Video of this car is on my channel , someone crashed it years ago . still have these fenders hahaha

[@Cifuentes415]

Are you from Marin county