Рет қаралды 852
A few years ago I bought a set of Milwaukee impact/driver bits and up until recently I haven't had the need to switch bits that often during a project. But as we got into more home construction and repair projects, we were swapping bits regularly because nearly everything we were taking apart was held together with Phillips head screws and the new screws that we were using required a T25 Torx bit. Then I realized that the Milwaukee kit I had bought came with 2 double sided bits. One had a Phillips head on one side and a straight screwdriver head on the other. The other double-sided bit was exactly what we needed because it had a Phillips head on one end and a T25 Torx head on the other. Once I started using this bit it rarely leaves my impact driver. But now after LOTS of hard use this double-sided bit is starting to wear out. So, I thought for sure by now I would be able to find this bit in a pack of because who wouldn't want something this handy? Well, turns out they are harder to find than I was expecting. These bits are still only available in certain kits, and they are NOT available in a pack of 5 like I had hoped for. I once again had to buy large kit in order to get the one bit that I actually wanted. And after voicing my opinion to a @MilwaukeeTool rep who happened to be at @HomeDepot while I was on the hunt for another of these bits, I have a strong feeling that my words were falling on deaf ears and this purchasing of larger kits to get the one bit I need is the dance we will be stuck in.
#milwaukeetool #MilwaukeeShockwave #Tools