Just bought this tool , I’m using 1/4 hex shank on a Milwaukee drill , works great ,… for anybody who wants to know …
@rodpotts2666 Жыл бұрын
Cool , thats why i was checking youtube to see if i could just use drill with 1/4 shank. thanks for sharing that.
@evilnoriega Жыл бұрын
It seemed like it was possible. Thanks for confirming it.
@johnnybrook4833 Жыл бұрын
THANK YOU
@GabrielVargas-d2w2 ай бұрын
This tool works great it saves me time and un nesesary hand crank Cool video
@YOUTUBER-ir6ef2 жыл бұрын
I like it too, 36 year Michigan Master Plumber.. Also Licensed in Alabama as As Master Plumber an Gas Fitter
@rb2512 Жыл бұрын
Absolutely,just don’t hold down the little lever on the trigger when running it
@radicaldreamer2 жыл бұрын
I love your drain mock-up idea. I've been considering making some mock-ups for different scenarios.
@starskyannhutch85182 жыл бұрын
Video reversed images,but I’m running it foward.
@trollingprophet Жыл бұрын
The snake does absolutely nothing when I crank it. What am I doing wrong?
@rb2512 Жыл бұрын
Did you try pressing and holding the little black lever attached to the actual Milwaukee auger itself while holding down the power source button simultaneously.
@corporatemike1985 Жыл бұрын
I had an issue where mine wouldn’t want to go forward or backward very far. I guess you have to put a little more pressure around the handle for it to auto feed properly.
@carloskummer99062 жыл бұрын
Really thinking about picking one up. This video helped ! Thanks.
@krishill6505 Жыл бұрын
I wish you could retract the cable without changing the direction of rotation the take a chance is letting go whatever the head grabbed and leaving it in the drain like a ball of hair
@YOUTUBER-ir6ef2 жыл бұрын
just bought one two day, old dog can learn new tricks, best hand held auger I've seen in years.. hands down
@richacosta46109 күн бұрын
Till he finally seen forward. What difference right
@rich-qk7dc2 жыл бұрын
As a plumber for 35 years it is painful for me to watch you try to get a cable down at drain while operating it in reverse
@starskyannhutch85182 жыл бұрын
Running it in reverse helps negotiate turns or traps sometimes,but the video looks like its in reverse bit its definitely running foward.I seen that when I made the video.I noticed my trash can on the opposite side 🙂
@@starskyannhutch8518 were you using the selfie camera? Not sure why it defaults to reverse image. But you can change in settings.
@starskyannhutch85182 жыл бұрын
@@skliros9235 I used my iphone
@dame216dame Жыл бұрын
@@starskyannhutch8518 very true I learned that trick years ago…Also if he’s been a plumber 35 yrs , why is he looking at you snake?…lol
@exceleratorjoshua2 жыл бұрын
I have a Rigid trap snake same thing as this. However that Ridgid is going for over 50 bucks. The Milwaukee is on special for 30 bucks right now. Yes you can put a drill on it which is how I plan to use it that gives way more control due to variable speed rather than spending 100 bucks on the Milwaukee power source. So best bang for your buck at this moment is actually Milwaukee
@mathewthatcher62742 жыл бұрын
For the price, I'd check it out. It will more than pay for itself the first useable
@SerengetiSam3 ай бұрын
Hey, couldn't you find a noise location to film
@phantomproductions17515 ай бұрын
Love the videos though and appreciate your help keep up the good work.
@Johnnyproduce11 Жыл бұрын
Do u have to use the auto feed feature? Is there any way to do it without that?
@rb2512 Жыл бұрын
You do not have to use the auto feed feature.This tool is very versatile!!!
@richacosta46109 күн бұрын
I cant believe no one noticed he was going the wrong direction!
@Esckelson0187 Жыл бұрын
You can't use a regular drill with this?
@rb2512 Жыл бұрын
Of course,but I’m just Milwaukee to the bone ,so,I opted for the(Milwaukee)power source.
@BoffaDeezMrBojangles Жыл бұрын
It literally took me 5 mins to hook up my auger drive “ no instructions “ and hit pop and clear a urinal .. My only problem how the heck to your remove the tool drive ? Lol
@noesanchez7552 жыл бұрын
Is that a 1/4 drive to 1/4 ? Perhaps I can just use my drill vs buying the driver
@starskyannhutch85182 жыл бұрын
This Trapsnake is way better then a drill connected to hand snake,trust me.
@anandpatel14332 жыл бұрын
@@starskyannhutch8518 can you elaborate? does it in fact fit a 1/4? and in what way is the trapsnake driver better?
@starskyannhutch85182 жыл бұрын
@@anandpatel1433 Yes it fits a 1/4 inch cable but only the Milwaukee cable can be used on the Trapsnake because in the drum it has a special slot to attach only the Milwaukee cable and it screws down to secure the cable.The Milwaukee Trapsnake is smaller and lighter then drill attached to a snake.I clear drains daily ,so,that makes a big difference.
@Redridge07 Жыл бұрын
He was going countrerclockwise, He should have been going clockwise on the insertion
@charliegodinez96552 жыл бұрын
Been using an Erickson for 20 yrs for manual
@TruthSeekerAi2 жыл бұрын
i got 2 of these the first day it came out i have the whole kit now love it
@Super_Mario_Fpv2 жыл бұрын
Pretty good demo man. Definetly something im thinking about grabbing
@rb25122 жыл бұрын
It’s clutch bro,definitely get one!!
@brantleyblow4032 жыл бұрын
Would this tool be safe to use in a toilet as well?
@rb2512 Жыл бұрын
Absolutely!!
@auspicioustoot2 жыл бұрын
Drop the music altogether it's a tool review not a vlog lol
@rb25122 жыл бұрын
I’ll keep that in mind.😎
@RealityDreams17 Жыл бұрын
Great video, get yourself a microphone for the phone to capture your audio better bro you’ll get more views
@cliffvinyl Жыл бұрын
You are turning it in the wrong direction it should go clockwise.
@jamalbenthall151 Жыл бұрын
Great video thank you 😊
@KLNYC Жыл бұрын
is a 1/4" hex head right? so that mean i can use tool no?
@hectoralvarez7560 Жыл бұрын
Very helpful review thank you 👍🏼
@danielandrade147 Жыл бұрын
why is this dude manually pulling the snake out?! It is AUTOFEED! Do NOT do this to your snake!
@rb2512 Жыл бұрын
It’s both Manuel and self feed,sometimes it’s very necessary to manually feed than auto feed.Finesse brother,finesse.lmao.
@sobemilligann2 жыл бұрын
Thank you for the help
@gfhjhvjgfvkjvv3666 Жыл бұрын
Can I put a impact drill on it or a drill
@rb2512 Жыл бұрын
Yes
@michaeltovar84872 жыл бұрын
Here come all the arm chair pros. 😂
@carlosolvera70012 жыл бұрын
You’re spinning the wrong way
@skliros92352 жыл бұрын
Does it come with a bit to attach to a drill?
@starskyannhutch85182 жыл бұрын
It has a hex shank slot on the tool where I have the power source attached,but if you remove it you can possibly attach it there.
@steved25102 жыл бұрын
You bent the cable too much that’s why it won’t go down
@yorkrojas1452 Жыл бұрын
Thanks a Million!!
@phantomproductions17515 ай бұрын
U got it
@jstu452 жыл бұрын
You made that tool look bad
@starskyannhutch85182 жыл бұрын
Tell that to about 50 customers where I cleared their line in 4 to 5 minutes with the help of the Trapsnake.😄
@davidharrington502 жыл бұрын
Ur spinning it backwards bro and you are working against urself, it's not going to feed in that way
@rb25122 жыл бұрын
Great Video!!!!
@jondye6161 Жыл бұрын
The tool is great the review however is probably everything that could be wrong with a review
@rb2512 Жыл бұрын
Elaborate !!
@hollywoodjoe3259 Жыл бұрын
Looks more of a pain in the ass than what it’s worth ,better off with a tub machine,your kink is way to far back why fight so much to pass the trap 🤷♂️
@goru42610 ай бұрын
Do not buy this product, it's useless. I've been trying to make it work for a week now. Most of the time it won't feed forward at all, if you are lucky to make it feed forward now it won't come back and you have to pull it manually. It has hard time negotiating any kind of bends, even the easy ones. Shame on Milwaukee for selling such a low quality product.
@starskyannhutch851810 ай бұрын
The machine has 3 wheels on the tip of the machine.Make sure the power supply button is set for the machine to go either forward or backward and press and SQUEEZE the trigger so the wheels can engage the cable,otherwise the cable will just spin without feeding nor retracting depending on the option pressed on power supply(switch on power supply)