Lancer EVO 6 LOTS OF NEW GENUINE PARTS

long time no vid!!!!!! finally tracked down a genuine head unit plus a heap of new genuine parts for the EVO 6
link to my Sakura pre meet below
www.facebook.c...[%7B%22mechanism%22%3A%22your_upcoming_events_unit%22%2C%22surface%22%3A%22bookmark%22%7D]%2C%22ref_notif_type%22%3Anull%7D
link to actual event below
www.facebook.c...[%7B%22mechanism%22%3A%22your_upcoming_events_unit%22%2C%22surface%22%3A%22bookmark%22%7D]%2C%22ref_notif_type%22%3Anull%7D

[@BOSSGTE]

Great to see you back mate.

[@MindieJ]

Trying my hardest to find time for videos

[@stevemasters4748]

I run a cheap Bluetooth cassette through my factory unit, works really well with no messy cables or anything. Makes a big difference to the look as well. Great videos, keep them up.

[@MindieJ]

Good to know!

[@wademullins7326]

That has got to be one of the best evo's around! Keep up the good work bud! Thanks for sharing the sites you go to. Have some shopping for my evo now.

[@MindieJ]

Thanks Wade appreciate it mate

[@SHOCKcustoms]

The best restomod channel on the tube. Well done Lil Chris

[@valiantJager4502B]

Great to have you upload lad, EVO is looking mesmerising as always

[@MindieJ]

Thanks mate 😁

[@Cobretti058]

Everything you are replacing makes perfect sense to me

[@MindieJ]

Glad it makes sense to atleast one viewer haha

[@markxuereb2392]

Mate, what an EVO is that, so mint, well done

[@MindieJ]

Thanks Mark 😄

[@wrx99]

Welcome back bro always think I should get an original GC8 Radio back in my car. Great video mate.

[@MindieJ]

You should! When a local one pops up I’ll grab one for mine

[@NVGesus]

the different colour of those plated steel parts is because years ago Cadmium was used for its excellent plating properties but was found to be acutely poisonous and a probable carcinogen, so it was removed from the Zinc plating process.

[@Richorob]

Good to see you again mate! I’d use the old one

[@andrewsteele7663]

Thanks Chris, great video, and yes, it is the little things that make a difference, Cheers.

[@MindieJ]

Yes it does!

[@Za3DoRzX]

Just to point out, my Silvia replacement headlights I ordered from VegaAutoSports came with silver zinced bolts as well.

[@cameronmeldrum-e7d]

He’s back 🔥🔥 good vid as always mate

[@MindieJ]

Appreciate it

[@Shauny808]

Been missing these vids 👌🏼

[@MindieJ]

We back BABY!

[@Cavscout101]

Just did the stalks on my Evo 4 and it's like new.

[@karlruditis5615]

That’s a very special evo what a car!! Keeper that 🙌🙌

[@MindieJ]

Definitely a life long partner this one

[@adamevo6]

The cracks on those arms were actually a re call by Mitsubishi back in the day, they replaced with a stronger arm under warranty

[@MindieJ]

You rekn they will replace them still under warranty after 25 years still? 😏

[@adamevo6]

@@MindieJ in 2018 they had already stopped as I think there is a cut off point, my importer checked to see if mine had the revised arms, which luckily it did, you could contact Mitsubishi with your chassis number, It’s worth a few emails, you never know

[@VLcuzzy]

He's back!!!!

[@MindieJ]

For now haha

[@harper6089]

Is project performance still going to be open moving forward after what happened?

[@burchie7472]

what happend

[@MindieJ]

No idea I haven’t worked there for 6 months

[@harper6089]

@@MindieJ Yeah I know that just thought you may know more considering you were working there for a while and heard it's closing.

[@sharukh-i8p]

bruhh i was thinking to buy a car now in know which car should buy

[@MindieJ]

Honda civic?

[@nedflanders3418]

There seems to be a lot of “prohibited” and “oversized” items in buyee. Is there any way around this?

[@MindieJ]

Message them

[@Yosti86]

OCD to the max but I love it, great content. Question, what do you do with all the old parts that are still immaculate?

[@MindieJ]

put in the mitsubishi packet and put them in a box

[@bigal878]

Great to see you back mate. I have to ask… how much were all the parts you bought in the cardboard box that you started opening at the 15 min mark? I’m just curious Cheers 👍

[@MindieJ]

about $800 or so

[@gt-rjake]

About time !

[@MindieJ]

Dad life, know what I mean

[@gt-rjake]

@@MindieJ yes, fully understand!

[@TonyVanBeek]

Yes I have noticed Mitsubishi has changed from Gold to Silver zinc. Most of the new parts I am getting now all are in silver.

[@MindieJ]

Weird 🤷🏼‍♂️

[@bill13690]

Great video there, Chris. I have also uploaded quite a few videos onto my channel as well lately. Keep up a good work mate Cheers. From William.

[@MindieJ]

I will check it out

[@micko_]

If it plays on ya mind always change it out

[@4ndy530]

Next level perfection! 👌

[@MindieJ]

Glad you think so!

[@dyIanVII]

I know exactly how you felt when bidding closed lmao, picked up a pair of ganadors a few days ago, went from zero bids to like 13 in a span of 5 minutes, longest 10 minutes of my life waiting for the confirmation haha Out of curiosity, what postage method did you go with?

[@nismofreak33]

all of the manufacturers moved away from the gold cadmium plating to the silver zinc plating. most likely due to it being less cancerous haha. You can tint the zinc to make it look gold but it never lasts anywhere near as long and doesnt quite look the same

[@MindieJ]

Good info 👌🏼

[@pudlife4703]

Did you ever do a vid on the vw?

[@MindieJ]

On a stock VW Polo?

[@jarednichols8761]

Hows the subie going? Miss watching your videos weekly

[@MindieJ]

Haven’t even looked at it since the last video on it to be honest

[@snrautoworx2840]

Its been a while since you last uploaded bit like myself its been well over 5 months i think 🤦‍♂️🤦‍♂️ but life with kids will do that, anyway where can we send you a sticker ill send one of mine your way to chuck on your toolbox 😉

[@chromo4388]

Missed the videos

[@sim08u]

I think I should just pull the trigger on what I have in my cart after seeing this vid...

[@MindieJ]

It’s only money, you can get more

[@sim08u]

@@MindieJ yeh I'm gonna replace my stalks today hopefully and check whatever else needs to be replaced

[@frsr416]

how does the shipping work with buyee.

[@kianheagney]

The seller in Japan ships it to Buyee, who then send it to you from their warehouse. It's usually a fairly quick process

[@MindieJ]

As above

[@frsr416]

@@kianheagney do you have an idea what prices will be for shipping if you win

[@kianheagney]

@@frsr416 completely depends on the items you buy. I bought some S13 sidemarkers that cost nearly $100 in shipping and fragile packaging fees, but then ordered a small model car a few weeks later that cost around $25 for delivery. You can also bulk package orders too if you buy a lot of stuff within 30 days of each other

[@MindieJ]

As above

[@Barrapotter]

Isn’t pp closed

[@MindieJ]

No idea call them and ask

[@Barrapotter]

@@MindieJwhy so salty about pp

[@MindieJ]

Where was I salty? I have no idea, I don’t work there, if you want to know you’d need to call them 🤷🏼‍♂️

[@danielshuttler4413]

Fuck yeah!! Missed ya mate 🤙🤙

[@MindieJ]

Missed you too Daniel

[@RetroJedi9]

Holy shit parts really do come overnight from Japan

[@MindieJ]

Literally

[@92Godzilla]

factory head units sell for over $1000 ?? wow think of how many would have been pulled out and discarded over the years.

[@james22939]

Wow

[@LogansSpeedShop]

I enjoyed the banana content

[@MindieJ]

#1 fruit

[@robirvine2922]

You definitely have ATD😂

[@tiamarie177]

Far out I swear it looks like you have aged a shit ton since the last vid 😂

[@adamevo6]

Kids lol

[@MindieJ]

Thanks for the kind words

[@dannyboy632]

Mean lol

[@MrRippinonyou]

Change them Chris the ocd will kill you !!!!

[@MindieJ]

More of a safety thing than anything else

[@MrRippinonyou]

@@MindieJ it would be right from that perspective mate I’m a mechanic by trade and seen it done before without issues . I can’t really say in your situation as I didn’t weld it or know how it was prepped and cleaned/ welded but when done properly it will be fine just doesn’t look pleasant. All the best car looks amazing Chris 👌👌

[@brotherabid]

Hard race ball joints are bad quality not that good, from reviews on hondas they break easily, go with a good Japanese brand such as 555 ball joints thy have stood the test of time, everyone who has used hard race ones they don’t last, hard race just use china items which have been painted different colour