Minn Kota Endura Buying Guide | Best Budget Trolling Motor? C2 vs MAX

[@wyldbill100]

GOOD JOB! Thoroughly enjoyed this and learned a lot from your short, concise, and informative video.

[@dand7052]

Here's the problem most are not talking about. Not long after the warranty on a Minn Kota is done, the internal gears strip out and you're stuck with an expensive boat anchor. The older models went forever, the newer units are not worth it in the long term.

[@terrycox3998]

I've got the Endura max 45 and it has worked relatively well the first 3 years but this year it didn't want to work at all so I looked in it an water had got in an need I say anymore it didn't work at all . I would like to know if I can get parts like the brushes and the rear bearing on the armature . ?

[@TCSkiFilms]

Let's say I want to do 2.5 mph And I can do that with a 30# thrust motor Or 50# thrust motor. Would the amp draw Be the same? *** would the 50# motor be more efficient on a lower setting than a 30# motor needing a higher setting to match the same performance?

[@fishingwithcamo-joe88]

the best BUDGET...trolling motor is the"NEWPORT VESSEL".....MADE FOR ALL WATERS...SALT & FRESH.....UNDER $300

[@crumbopulis]

WHAT IF I ALREADY OWN THE KAYAK

[@MostlyPosative-nj5ex]

Don’t expect a Garmin Striker 4 transducer to fit on an Endura C2 trolling motor. It’s too small.