Minn Kota Powerdrive V2 Seal Kit Repair

Internal Water Leak - Repair using a new seal kit from Northland Marine.

[@ethancain5185]

Thanks for the video, gonna try this myself. My power drive has water dripping out just like you described

[@SINIS0RSA]

Great video. I'm about to do this with mine Endura.

[@FishinTooling]

Sounds good. Good luck!

[@phillipvantonder7127]

Last Back shaft seal wrongly installed washer must be outside to protect seal from fishing line ets.

[@FishinTooling]

I thought so too but that's how it was when I took it off so I matched it during reinstall. This was the first repair since it was brand new.

[@user-il5oi6ko5f]

Don't need all the musical noise, could use some comments during install instead.

[@gonetolake]

Is there a c clip that I missed ? And I got the upgrade kit and the three washers are missing

[@FishinTooling]

The thrust washers should be on the end of the motor shaft. I didn't get new ones in the kit. Are they stuck on there maybe?

[@GG-sb8fd]

You put the outer seal in backwards

[@samtate1260]

My prop will not move box inside just makes clicking sound everything works except the prop can move it by hand that’s it

[@FishinTooling]

You may want to also replace the brushes then.

[@kyleigh2643]

Thanks for posting this, but you're a couple years too late. I had to do the same thing to a Minn Kota Endura 55 a couple years ago.

[@brockvogel9469]

Did water getting in cause your trolling motor to not work?

[@FishinTooling]

Not yet when I found it. I ran it about twice before noticed the drip out of the top end and I pulled it apart and got the water out so I caught it before it caused any permanent damage.

[@benjiang6493]

nice video... I think you put the 2nd seal upside down : D

[@FishinTooling]

I thought the same thing but that's how the original one was seated

[@PetClipdog]

Why didn't you text for Water Leaks before go to the Water?

[@FishinTooling]

I had been using this trolling motor for 2 years with no issues. One day I was out fishing and a few drops of water came out of the head after retracting. I immediately came home and tore it apart to find this leak so I cleaned it out and ordered the parts and repaired before using again.

[@PetClipdog]

@@FishinTooling You can Text it. Minn Kota recommend to place in a bucket of water and blow air from the high head Unit. If you see bubble so you have a leak and what you have to Change seal.

[@scottkinkead6324]

You left out a bunch of stuff a guy should know before tackling this project

[@FishinTooling]

Scott sorry about that. What are you having trouble with?