Mistakes Were Made: What I Would Change Super Dually 2.0?

[@clydestanley4740]

Look into Engineered Vintage out of Oregon for hidden winch mounts and custom aluminum grill. Nice truck

[@andrewthompson852]

Dont listen to the haters, ive wanted to do this build for years. You give a lot of insperation plus hopefully can make a little coin off of youtubes advertising . Big 🧠

[@barnyardbuildz]

Thanks trying to figure out a new build maybe a LS swapped wagoner or a camper for the dually and some leather seats for it

[@BretteCaldwell]

Look at the Buckstop bumpers. That would look cool on that truck. Awesome build!

[@barnyardbuildz]

I’ve seen those kinda torn though I’m going to have to build brackets to modify the bumper to fit

[@laszlovass7326]

Thank you for inspiring us. My son (14) has some great ideas and your helping them come together.

[@barnyardbuildz]

Your welcome man need any help just let me know or message me on Instagram

[@sethmcneil]

can you say more about the core support you briefly mentioned? also, good call on avoiding the body lift, exposing the frame; and on declining a lift in general. looks killer in understated stance.

[@barnyardbuildz]

@@sethmcneil I sure can. Thanks I would have made it a little higher if I paid more attention

[@rangerismine]

On my Chevy K30, I mounted the winch behind the front bumper with a winch plate from harbor freight. The cable exits the bumper where the front license plate is. I have a video on my channel if you want to check it out.

[@DaPopaBear]

I also have a long bed camper that’s era correct that’s in great shape. It’s Scottsdale colors

[@barnyardbuildz]

@@DaPopaBear where are you located and how much

[@FarmAlarm]

As a professional window tinter, for the past 23 years, I'll tell you to be sure to not cheap out. I recommend LLumar IRX (Inferred Ceramic). Nice build!

[@barnyardbuildz]

That’s exactly what I wanted. Didn’t cheap out on anything else hate to cheap out on the little details that people actually see. Trying to decide between 20% or 30% any input

[@FarmAlarm]

@@barnyardbuildz what state do you live in? Are you worried about legality?

[@barnyardbuildz]

@@FarmAlarm I’m in NC not really I don’t want darker than 20% though pulling trailer at night and such

[@FarmAlarm]

@@barnyardbuildz I'm a big fan of 25%

[@barnyardbuildz]

@@FarmAlarm I got some samples and that’s was I was liking the most

[@DaPopaBear]

I have a k30 single wheel practically all original and I just have a front to hitch on the front the I have an adapter plate for my winch looks super clean

[@barnyardbuildz]

@@DaPopaBear possibility

[@tub4148]

I’ve got a 88 single axle. I’m putting a 8.1 in it. And putting a flat on it

[@barnyardbuildz]

@@tub4148 sweet saw a 8.1 for sale the other day was tempted to

[@GunMuse]

Funny thing I have a 78 Ford f250 custom cab, a 2005 cts V with the 6 speed manual upgraded to handle 1300lbft and a 81 Blazer plus a 78 scout II with positraction front and rear all that needs to be recombined having a LS6 with manual laying around for projects let me know what we can work a collabe on.

[@barnyardbuildz]

Where are you located

[@GunMuse]

@@barnyardbuildz New Mexico Im a Holley EFI master tuner. tVwJ9le0RFs to find my 5.3 on 93 octane no power adders breakiing 800 hp.

[@barnyardbuildz]

@@GunMuse sweet

[@gobo470]

It’s a custom build as it is so I say custom bumper. Move Bumpers have some great options. Allows you to customize it while also keeping costs low.

[@barnyardbuildz]

@@gobo470 yeah I’ve looked into those

[@hangfire6368]

I recommend drawing up a design for a winch bumper you like and have it cut and welded out of aluminum. No need to paint and keeps the weight down.

[@barnyardbuildz]

@@hangfire6368 I have really considered this if I can’t find one that might be what I do. Would you be worried about the aluminum breaking or tearing under the winch load

[@hangfire6368]

@@barnyardbuildz I have a steel bumper from Buckstop on a 2010 Dodge 2500. They do offer aluminum. I run an aluminum Genright bumper on a 2000 TJ with a 15,000 Warn winch. I'm not sure of the winch plate thickness on the Buckstop bumpers but I know others offer aluminum too. I think it is a matter of supporting the winch plate properly. Love your build. It looks cool as hell.

[@barnyardbuildz]

@@hangfire6368 thank you hopefully we’ll be able to stay up on the content anything you like to see let us know

[@michaelbaumgardner9493]

6061 or 7075 Aluminum, half the weight and same strength as steel of same thickness. Food for thought. Also, you could Line-X it to help against corrosion if you get into salt or sodium chloride

[@brucenichols9206]

Old man looks familiar sitting here wondering if I met him in Roseboro or Stedman to sell him a rod and reel off of marketplace

[@barnyardbuildz]

@@brucenichols9206 not that I know of

[@bigloads3600]

Beautiful truck

[@barnyardbuildz]

@@bigloads3600 thank you

[@Jlinwoodjackson]

I wouldn’t use the grease barrel.. 😧. Maybe 3-5 piece panel ..rivets..🤷🏻‍♂️

[@Jlinwoodjackson]

Aluminum.. 👌🏻

[@ronaldsteveson76]

No hater here but no super singles and no on a big ranch hand bumper. Take away from the square body. IMHO 😎👍

[@barnyardbuildz]

@@ronaldsteveson76 yeah that what I’m struggling with thought about one without the headlight protection

[@wyattoneable]

An old camper would be really cool. I hope you find one.

[@barnyardbuildz]

Me too I think some trip style videos would be cool actually using it not just build and forget

[@darrinstone49]

I'm in the process of building a couple cummins powered square bodies... a 4 door Meg, 6 door, suburban & my 82 gmc single cab with a 96 Dodge frame, Ppump 12V ect. Check out Move bumpers.

[@grahamgeiger3206]

How about interior noise? Ive been thinking about doing something simular for awhile and ive heard some people have issues getting the interior noise to a tolerable level especially long distance towing.

[@barnyardbuildz]

@@grahamgeiger3206 it’s no worse than a 2000 7.3 F350. These truck weren’t quite new. I have added 2 layers of killmat on the firewall and lined the doors 1 layer on the floor I will be doing a 2nd once I get the seats I want

[@DaPopaBear]

I’ve gotta 83 k20 suburban with a 5in rough country lift, 350, big cam, headers, nv4500 5spd that’s a beast and I’m sellin wanna buy it

[@barnyardbuildz]

@@DaPopaBear no thanks looking for a 72 or 73 corvette

[@bigoledave5718]

A dually Suburban build would be quite unique.

[@barnyardbuildz]

@@bigoledave5718 I have entertained a suburban but I really think a Corvette is the way I want to go

[@bigoledave5718]

@@barnyardbuildz A diesel Vette dually!

[@barnyardbuildz]

@@bigoledave5718 haha mah

[@jeffbailey7765]

Check out IronBull Bumpers

[@barnyardbuildz]

@@jeffbailey7765 will do I

[@justinmccaffity6635]

What core support are you referring to, been looking but haven't found it so far.

[@barnyardbuildz]

Here ya go man www.partsgeek.com/22tbcgm-dodge-ram-2500-radiator-support.html?AYY&PartsGeek+Google+Base&+Dodge+Ram+2500+Radiator+Support+Action+Crash+CH1225124+94-02+Dodge+Radiator+Support+2001+1998&fp=pp&gbm=a&gad_source=1&cid=18313611776&gclid=CjwKCAjwxNW2BhAkEiwA24Cm9KICnX2oa563eg8Omc41LsS1hdh0okmMfBZ2fYJSuUBf2anyTl6VsRoC1v8QAvD_BwE

[@justinmccaffity6635]

@barnyardbuildz thanks man. Your videos on this are what made me decide to go cummins on my gmt 800 squarebody swap.

[@barnyardbuildz]

@@justinmccaffity6635 awesome glad to hear that. I would go ahead do the performance upgrades 1st

[@justinmccaffity6635]

@barnyardbuildz that's my plan especially after watching your video about yours.

[@barnyardbuildz]

@@justinmccaffity6635 if my setup ever fails ill graft that in

[@petermpicard]

You had me until the LED lights, are you 12!

[@barnyardbuildz]

@@petermpicard sure man if that’s what you want to think.

[@AndreC240]

You should start a truck company combining the all the best engine/chassis/suspension/brake components from American trucks and ignoring all the stupid elements of modern vehicles. Hell, I want to start that company, but you’re already doing it.

[@barnyardbuildz]

Yeah I’d love that idk about the liability thing but would be awesome

[@skyline9789]

Would you sell the truck? Or rent it for a couple hours? Very interested and have funds in order thank you

[@barnyardbuildz]

@@skyline9789 not ready to sell it yet

[@skyline9789]

@@barnyardbuildz could i pay you for a test drive? Im assuming its a no just figured id ask lol. Its either this or just buy another 2015-2018 megacab dually with aisin

[@matthewharchenko9714]

Do a move bumper

[@barnyardbuildz]

@@matthewharchenko9714 maybe

[@iant720]

I'd consider just dropping a truck body on a shortened bus chassis.. Not 4x4 but you get air brakes!

[@barnyardbuildz]

That would sick on a C60

[@dellmack1]

Air brakes you need CDL license-

[@iant720]

@@dellmack1 Not for a private vehicle tard

[@blainecelestaine4543]

Your in a small circle of people who if they had the resources and knowledge to do this wouldn't complete this project and on such a high level. The big 4 have far more resources than u and their R&D still has mistakes. Thx for sharing it all

[@barnyardbuildz]

@@blainecelestaine4543 thanks man I definitely have less R&D when you put it that way I learned from mistakes they made and never learned from 😂

[@blainecelestaine4543]

@@barnyardbuildz I'm guilty myself of dragging a$$ . I had a 85 Dodge crew cab which I sold to get a Chevy crew long wheel base. Bcuz I didn't have the title on the Dodge. Before I got around to swapping the Chevy got stolen off the farm. So trust me many more of us plan than do ... But you did it.. BIG UP

[@Dancing_Alone_wRentals]

@@blainecelestaine4543 .....yeah. That really does speak volumes. "But you did it" It is a great looking project.

[@bobbyjohnson2821]

as a 59 yr old with bad knees only thing i would chance is i would make it an automatic

[@barnyardbuildz]

@@bobbyjohnson2821 I toyed with the auto so my wife could drive it more easily but 6-7k for a Allison 1000 and standalone computer to not blow it up

[@bobbyjohnson2821]

@@barnyardbuildz i see ty for an answer love the build

[@barnyardbuildz]

@@bobbyjohnson2821 no problem thanks

[@jamesford2942]

What is wrong with the original frame? Just put the drivetrain in it. It already fits the body and should be strong enough to do the job.

[@barnyardbuildz]

@@jamesford2942 you really need to box the frame those kits are $800-$1000 and the time to weld it in your can just slap it on a ford frame. Also the truck was 2nd before so there’s that

[@ximan09]

Good stuff, but why is it a good idea to talk over a background soundtrack? The entertainment should be in what you have to show and say. In other words don't be something you're not eg. music video. That aside; great build.

[@barnyardbuildz]

@@ximan09 that’s just how you do KZbin videos brother. Thank you

[@AndraeTaron]

That truck is Sexy👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾

[@jerrywhitlock4028]

Fu you about the bulldozer frame & springs

[@barnyardbuildz]

@@jerrywhitlock4028 haha it’s facts I have a LS Swapped K5 and it’s almost that way

[@bsterris1615]

Real trucks don't have spark plugs.

[@barnyardbuildz]

@@bsterris1615 😂