Honda ADV 150 - Transmission / Final Drive Oil Change | Mitch's Scooter Stuff

[@MitchsScooterStuff]

T O O L S Oil pan - amzn.to/3bOmT5Q Nose pliers - amzn.to/2yetDDj Towel / Rags - amzn.to/2Yh8jvg Ratchet 3/8 drive - amzn.to/2hhmnUs 10w-30 engine oil - amzn.to/2pxVR9d Syringe with tube - amzn.to/3ztNGmk 12mm socket 3/8 drive - amzn.to/2xM4Edr Tiny flathead screwdriver - amzn.to/2zyrLck 3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl Torque wrench 5-45 ft/lb 3/8 drive - amzn.to/3TKdS3Z

[@Timothy-ns4qn]

Excellent camera work!!

[@MitchsScooterStuff]

Mahalo!

[@-aliqasim95]

My friend, I have an oil change shop and I put viscosity 80-90 liqui moly gear oil

[@MitchsScooterStuff]

👍🏼👍🏼 some people do that what you use… some people like me like to follow what Honda recommends what oil weigh to put in 🤙🏼

[@-aliqasim95]

@@MitchsScooterStuff Good but how long or how far to change this oil that you put in thank you very much

[@Ivan0tR2RO]

Hi Mitch, first of all thank you for the tutorials and for sharing your knowledge with others, thanks for everything. I would like to ask you for a recommendation on the brakes please, I have a honda adv 150 2022 motorcycle, and every year, after every winter here in NYC, the front disc brake always gets stuck when operating the handlebar brake lever, I don't know what to do, all mechanics just recommend me to change the whole caliper, I don't agree with this because it would mean an extra expense every year, some of the reasons I think are due to the salt, dust and snow of the winter weather in NYC, it also happens to me in summer, I have seen this same problem of stuck brake in many other motorcycles like the honda pcx, and others including chinese motorcycles, maybe it is due to a design flaw... I don't know, please kindly ask you, what could I do or what maintenance to do, to avoid stuck front disc brakes every year? Thank you 👍

[@sammanukyan5084]

Mitch question the drive oil is the same as engine oil your using? GN4 10-30 or 10-40

[@MitchsScooterStuff]

Hey I use GN4 10-30... yes for engine and final drive

[@Kirill_Sandalkin]

an interesting point is the measurement of the oil level. Do you really need to twist the probe to measure? For some reason, the oil level in the engine is measured without twisting the dipstick. On the PCX125, there is no probe on the gearbox at all, how strange...

[@MitchsScooterStuff]

I wish the setup is like pcx, a lot easier than dipstick haha. Engine oil no screw in, for final drive yes screw in for reading

[@КонстантинАндреев-и9ц]

красавчик!

[@MitchsScooterStuff]

😊👍🏼👍🏼🙌🏼