MITSUBISHI CARISMA 2001 - Schlüssel verloren - Lost keys - HU56 Lock picking - program transponder

Mitsubishi Carisma Bj. 2001 - Alle Schlüssel verloren
An diesem Fahrzeug wurde das Zündschloss getauscht, da es eine andere Schliessung als der Rest der Schlösser hatte. Wegen der gelben Markierung auf der Wegfahrsperre und dem Zündschloss, denke ich, es wurde beides schon einmal getauscht ( Wahrscheinlich auch das Motorsteuergerät ). Also nicht der erste "all keys lost" hier.
Da sich mein Lishi-Tool nicht ganz in das Zündschloss einführen liess, habe ich es ausgebaut und mitgenommen. Um das Lishi verwenden zu können, musste ich es ein wenig bearbeiten.
Mitsubishi Charisma year 2001 all keys lost
The ignition lock on this vehicle was replaced because it had a different lock than the rest of the locks. Because of the yellow mark on the immobilizer and the ignition lock, I think both have already been replaced (probably the engine control unit as well). So not the first "all keys lost" here.
Since my Lishi tool couldn't be inserted all the way into the ignition lock, I removed it and took it with me. In order to be able to use the Lishi, I had to edit it a bit.
ALLE AUF DIESEM KANAL VORKOMMENDEN MARKENNAMEN, WARENZEICHEN UND EINGETRAGENE WARENZEICHEN SIND EIGENTUM IHRER RECHTMÄSSIGEN EIGENTÜMER UND DIENEN NUR DER BESCHREIBUNG / VERANSCHAULICHUNG / IDENTIFIKATION
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY

[@erdemturan4517]

xt27a and xt15 have a very significant downside. Despite not being able to emulate all the promised the transponders, because they are lagging in the communication (this is the reason they dont work on old vehicle models with 7935/T5), they also have a shorter range compared to the original transponders. I assume that the signal to noise ratio is not ideal and the older cars are not able to filter out the relevant data. Low SNR with lagging data response ends up with smeared signal interpretation. On some BMWs I was able to use the Xhorse superchip, when I shortened the keyblade. Thus the chip was closer to the immo antenna coil, the car accepted it.

[@gameiro59]

Another great video as always. Many years of trial and error experience to achieve this level. Thank you

[@muradkhadzhi6874]

Your videos are great as always. I would like to see your videos soon. I learn something new from every video you upload👌

[@DimokDub]

Отличная работа, супер монтаж видео, спасибо за труд!

[@stein-arnefalchpedersen2222]

Great job! Thank you for sharing.

[@josecarlosjimenez5008]

Gran trabajo, gracias por compartirlo. Saludos desde sur de España

[@simonmolina3725]

Good as always Master... I have the same issue with Old BMW.. only 7935.... thanks for sharing

[@richardusak1775]

Another great job!

[@schluesseldienst_muzler_de4067]

Thanks

[@MrBensenn]

Very good Video, i like all your Videos. I have make the same experience with xt27a on old Bmw, original 7935 Nxp is best for this cars, but this Chips are expensive

[@tepSIJA]

perfect ! THX For sharing video ! regards

[@schluesseldienst_muzler_de4067]

Thank you

[@geo831124]

mam taki sam problem w Mitsubishi space star, na xt27a nie odpala. Zamówiłem oryginalny PCF7935, mam nadzieje że auto odpali. Pozdrawiam, dobry film :)

[@user-mt6ch1yp5n]

👏👏👏

[@redouan1234]

👍

[@martinc3809]

Hi, please, in last step when you prepare NXP7935 chip,you choose option "7935" in VVDI menu? For superchip in the menu is notice " chip is ready to start car" but in 7935 option, there is no this notice... So my question is, if you choose option prepare 7935 in menu, Is chip ready to start a car ? Or is needed write any eeprom data back to the immo box ? thanks for repy!

[@Songoaudis]

Another great job, can you tell me what program shows where the immo is mounted?

[@schluesseldienst_muzler_de4067]

Thank you. I do not have a program for it. Sometimes I look for it myself. Or internet search. Or trace the loop antenna cable.

[@Songoaudis]

​@@schluesseldienst_muzler_de4067Ok thank you good luck 😉

[@dannym.2225]

Good job bro!! One question why I don't decode the driver's door?

[@autolivepost]

hello friend tell me you have vvdi2 full version or basic?

[@KentAnahtar]

I have the same problem when I use superchip. It doesn't always work with the 7935 super chip. Greetings from Turkey..

[@schluesseldienst_muzler_de4067]

Hello. I'm also trying out where it works and where it doesn't. Greetings to Turkey

[@reinholdpeschel4646]

Super gemacht was kostet dieser riesen Aufwand wenn ich das so machen müsste käme ich auf riesen Kosten mit Kollegialen Gruß Reinhold aus Berlin

[@otokeys8149]

Original 7935 or aftermarket?

[@matthaioskostellos2149]

nice work. have you truy use mini prog??

[@schluesseldienst_muzler_de4067]

Hello. No, I do not have mini prog

[@anthonytruong8647]

7935 Nxp is like on old BMW with EWS, right?

[@karned273]

yes, but EWS is id33. Same transponder

[@tsukovlahov5678]

On Fiat Sedici 2007 / Suzuki SX4 ID40 Opel Superchip dont work...Then i dont haved xt15 for test but i'm sure that also will not work.Job done also with ori PCF7935AA then.

[@russia1593]

привет мастер, подскажите можно ли добавить ключ id7935 через obd?

[@user-nm8yz4di8u]

carisma добавляется по обд

[@schluesseldienst_muzler_de4067]

Привет. Я думаю, что это возможно с OBD

[@danielray7]

Z ews się tak bawiłem z xt27a 🙈

[@schluesseldienst_muzler_de4067]

Wygeneruj w EWS - Volkswagen

[@danielray7]

@@schluesseldienst_muzler_de4067 👍jak będę miał znowu jakieś BMW z ews to spróbuję

[@ricardolegorreta8302]

Hola amigo tengo un carro igual ago lo mismo pero ro no enciende me podrás accesorar