Mitsubishi Outlander PHEV Remote Control App Setup [2024] - Android/iOS - Charge | Climate | Status

[@everythinghome]

** Octopus Energy: Agile Tariff [2020] Get Paid To Use Electricity! kzbin.info/www/bejne/mJvGonqrZc6Va9k Mitsubishi Customer Services UK: [e-mail] [phone]

[@WarrenG007]

A good use for being able to have headlights on via the app is for instance you happen to have to walk to your home or front door in the dark it can iluminate the way ahead and help trying get the front door key in the lock ,it allso gives any potential stalkers etc that you may have company sitting in the car making sure you get home safe,you can then turn it of once home.

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. Some really good points there 👍🏼

[@chachu.whiskey]

Hello Mate, Nice video, I've tried using the remote climate control, but the problem is that it doesn't use the mains electricity to heat the car. It turn the car on or uses the already charged battery to heat the car up. Why won't it just draw electricity from the mains and not use the much needed charge. Have you got any suggestions to make it work by heating the vehicle without using the juice saved in the battery. Thank you.

[@chachu.whiskey]

Woke up this morning with a warm vehicle but only 6 miles of charge where as I would get 27 miles worth of charge without using the climate control option. Note: the vehicle was charging all night and was plugged in via UK mains charger.

[@everythinghome]

Hi - I agree, one of my frustrations too. Unfortunately there is no way around this. Re low electric miles it might be worth checking you're not running the preheat for too long. I do 10 mins and usually lose a couple miles range. If you’ve not already, please do like this video and stay tuned for some more content.

[@erwinmeyer5451]

in german: So werden die registrierten Geräte gelöscht (z. Bsp. bei Kauf von gebrauchten Mitsubishi Eclipse Cross PHEV, wenn der vorherige Besitzer sein Smartphone registriert hatte und keine Registrierung mit der Mitsubishi Control APP möglich ist, Fehlercode 2101): 1. Schlüssel muss sich im Fahrzeug befinden / 2. Türen müssen geschlossen sein / 3. Start/Stop Knopf (ACC-Taste) drücken / 4. 5 mal hintereinander auf der Fernbedienung verriegeln/öffnen drücken / 6. Warnblinkanlage einschalten / 7. 10 mal hintereinander auf der Fernbedienung verriegeln/öffnen drücken. Damit sind alle vorher registrierten Geräte im Fahrzeug gelöscht. This is how the registered devices are deleted (e.g. when purchasing used Mitsubishi Eclipse Cross PHEV, if the previous owner had registered his smartphone and registration with the Mitsubishi Control APP is not possible, error code 2101): 1. Key must be in the vehicle / 2. Doors must be closed / 3. Press the start/stop button (ACC button) / 4. Press lock/open on the remote control 5 times in a row / 6. Switch on the hazard warning lights / 7. Press on the remote control 10 times in a row lock/open. This means that all previously registered devices in the vehicle are deleted.

[@tatatoto6308]

Good morning I saw your very useful videos and I am sending you this message. I am the happy owner of a 2021 Eclipse Cross PHEV. I use the Mitsubishi Motor Remote Control Application - simple but sufficient - with an up-to-date iPhone 8. I noticed two things: - The range of the application is very short less than fifty meters - When I ‘m connecting to the car I receive a message indicating that the wifi network is old Is there a way to improve the situation. For example a manufacturer update? THANKS

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. Glad you found it useful. I agree the range is pretty poor. Although, if you're getting 50m that's a lot better than the connection range I get with my Outlander. I've not come across that error message, but it may be worth contacting Mitsubishi Customer Services who may be able to help. If you’ve not already, please do like this video, stay tuned for some more content and thanks for taking the time to contribute to the discussion on this video 🙂

[@CrazeAndrei]

Good video, reading through the comments and following the link to the FAQ I manage to solve the connection to the phev. My problem was with a huawei android 10 couldnt get the ssid in the app, after reading through the FAQ link I noticed that wifi and location settings are required and noticed the location wasn't activating on the phone. Solved after checking wifi and location settings in the app permissions. Thank you.

[@everythinghome]

Hi Andrei - Thanks for taking the time to watch and comment on this video. Glad you found it useful and got sorted. If you’ve not already, please do like this video and stay tuned for some more content.

[@BlessedPeaceAndLove]

God bless you ❤️

[@nikkyschofield9841]

Has anyone else found that the when you set the timer for the auto heat you can select eg 7:30am but then on the summary page it shows 8:30am ie still in bst rather than having changed to GMT? The time in the app top left corner is correct and the date is correct and it is correct in the car too. Anyone got any ideas? Great video by the way

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. Glad you found it useful. I don't seem to have had that issue. I've used the preheat since the clocks changed. If the app time is correct that should be the main trigger to start the pre heat. May be worth trying again. Sometimes the connectivity can be patchy! If you’ve not already, please do like this video and feel free to check out our other content.

[@CesarNog]

Question: Does this Remote control comes natively on Outlander Mitsubishi PHEV 2018? Do you know?

[@everythinghome]

Usually depends on the model. Models 4H and above I believe it does. Hope that's helps

[@CesarNog]

@@everythinghome How do I know if my model is 4H?

[@everythinghome]

Try this model checker www.carveto.co.uk/blog/car-spec-check/

[@nlouis7771]

Thank you for the informative video. I've managed to configure my app ( samsung Galaxy 21 - Eclipse Cross PHEV ) but it now says connected without internet . Any advice. Thank you

[@everythinghome]

Hi N Louis - Thanks for taking the time to watch and comment on this video. Glad you found it useful. With my Outlander PHEV when connected to the car it also says no internet which is normal. I usually have to reconnect to the house afterwards again. If that doesn't quite answer your question I'd try customer services. 👍🏼 If you’ve not already, please do like this video and feel free to check out our other content.

[@jhunanchoris7273]

is this applicable on outlander phev 2023 SEL?

[@everythinghome]

I suspect it will continue to have the app, worth trying 👍

[@GordonHunter]

Set up on Android Samsung not great - had to connect to the wifi, using car ssid and password, from the phone settings wifi menu using WPA2 encryption (I think), and then the app install worked.

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. Yea the app is great when it's all sorted but it can take some setting up. Glad you got it working! It's hard to imagine buying a car without preheat/defrost for the winter now. If you’ve not already, please do like this video and feel free to check out our other content.

[@dpayne8611]

Hey Ive got the 2014 phev. Never tried the defrost yet but pre heat doesnt seem to work all the time, ive tested both 10 min and 30 min but it has only worked once. Whats the biggest difference between defrost and preheat and why isnt pre heating working properly? :( Also preheating for 30 mins takes more electric than the car can charge Thanks in advice

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. I presume your heating is working at other times? I mainly use it for defrost (which consumes less than preheat in my experience). Make sure you don't open/unlock the doors during the preheat or it may prematurely end it. If it's still not working maybe have a look at the settings in the app and make sure there is nothing on there which would stop it working. Failing that maybe worth checking with Mitsubishi customer service or your local garage. It's a great time saver in the winter. Good luck🤞🏽. If you’ve not already, please do like this video and feel free to check out our other content.

[@dpayne8611]

@@everythinghome My pleasure, i will sub and like 🙂 No wrong with the car heat otherwise, probably my big fingers which did something in the settings. Its a must in winter. I will try around and check with Mitsubishi if something is crazy. Thank you a lot 🙂

[@kremepye3613]

Hey! Is it possible to defrost and preheat at the same time?

[@everythinghome]

No unfortunately not, we tend to prioritise defrost

[@longandshort6639]

I have a 2014 PHEV from new - but when they updated the app, I lost connection and cannot get it to connect to my car at all. So frustrating.

[@soproncuvictor2916]

Hi ,help please, I can't put the ssid ... Just password i can...

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. I'm not sure why that would be. Have a look at the video and if you're still struggling then maybe try contacting Mitsubishi customer services. If you’ve not already, please do like this video and stay tuned for some more content.

[@Ahorrarinvertir]

Setting up fail do to me, error 2101 at the end , so cant even use the app.

[@everythinghome]

Hi David - Thanks for taking the time to watch and comment on this video. If you're still having trouble connecting the app check out this excellent FAQs page (section E): www.richi.uk/p/mitsubishi-outlander-phev-faq.html?m=1&fbclid=IwAR2G3ONwKk8SP4ksF-SvwtmvT90PshtFfsnM9EtgvNWvPKua9tOqoxDW4AQ#phevfaqE If you’ve not already, please do like this video and feel free to check out our other content .

[@thankyouforyourcompliance7386]

Same with me. Android system.

[@longandshort6639]

well my app just won't register at all with my vehicle. When I press the lock/unlock 10 times, NO BUZZER sound at all. Why?

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. Did you press the power button without pressing the brake pedal? May be some more information on here: www.richi.uk/p/mitsubishi-outlander-phev-faq.html If you’ve not already, please do like this video and stay tuned for some more content.

[@paulbanks8583]

Really handy video the app tells you to turn on and turn off then do the key fob. This does not work FOLLOW HOW it's Done in this video.

[@everythinghome]

Hi Paul - Thanks for taking the time to watch and comment on this video. Glad you found it useful. If you’ve not already, please do like this video and stay tuned for some more content.

[@joeljohnatan5661]

I did exactly the same but in my car it dosen't work

[@everythinghome]

Hi Joel - Thanks for taking the time to watch and comment on this video. Do you get an error message? This may be useful: www.richi.uk/p/mitsubishi-outlander-phev-faq.html?m=1&fbclid=IwAR2G3ONwKk8SP4ksF-SvwtmvT90PshtFfsnM9EtgvNWvPKua9tOqoxDW4AQ#phevfaqE or failing that you can try emailing Mitsubishi customer services.

[@joeljohnatan5661]

Thankyou so much. I really appreciate your effort.

[@everythinghome]

No problem at all Joel, hope you get sorted out. If you’ve not already, please do like this video and feel free to check out our other content.

[@sachinpatel3298]

Error 2101 what does it mean plz

[@everythinghome]

Try www.mitsubishi-motors.com/en/products/outlander_phev/app/remote/errorcode.html

[@Nuub1100]

I tried this method a lot of times, but it still gives me 1103 error

[@everythinghome]

Hi - Thanks for taking the time to watch and comment on this video. Hmm, I don't think I've come across that error code before. The app does tend to be a bit glitchy with some phones. If you have another device you could try the app on there. Failing that try contacting Mitsubishi customer services. If you’ve not already, please do like this video, stay tuned for some more content and thanks for taking the time to contribute to the discussion on this video 🙂

[@abelremark7446]

WHHHHYYYYY do you drown and kill the message in this silly music. I cannot send this to my older relative now. Useless.

[@everythinghome]

My older videos have music, I've stopped using it largely now with the more recent ones