Mitsubishi Water Pump install - Evo8 Evo9 - Lancer Evolution

[@test-vl2bd]

Thank you so much for making these instructional videos

[@BLACKzj52]

thanks for the vid. looking forward to the Belt replacement. I've watched Evo timing belt replacement vids before but I tend to like the way you break things down and explain them.

[@BoostedFilms]

Thanks for watching! I'm like most people, i check youtube for how-to videos too. I try to be more thorough while also keeping the video length to a minimum. Most automotive how-to's i see tend to have shaky, dark camera work and not so good audio.

[@BLACKzj52]

No problem. I actually just realized that I never subscribed before despite having watched many of your Evo related videos, so I changed that. And yes I agree, lots of guys do the shaky, dark vids that only confuse or lead to more questions. Some people leave out vital info while others give way too much and begin rambling on something unimportant that drags out the videos. Anyways, keep the good work and I will be around to watch more

[@eriikncl24]

Can't wait for the timing belt video. Your very helpful! Keep up the good work

[@BoostedFilms]

Thanks. This project evo needs a lot of work, so that means lots of how-tos!

[@RichJ_youtube]

FYI, service manual says never put grease on the pump o-ring. Only water.

[@playlistforkids]

thanks for posting, great content

[@momoblancino3597]

Thanks for the video! But one tip, never use grease to lube O-Rings, it sounds weird but the grease will dry it out. Use a little bit of Coolant instead.

[@carloutsi]

very nice, keep it up with this videos.

[@bigl4201]

Do the threads on the water pump bolts require thread sealant? I’ve read that oil galleys pass behind those bolts on the Evo ix

[@danedewaard8215]

Thank You!!!

[@AdRoz126]

Hey Paul, how’d you remove the intake manifold without removing the dipstick? Mine is rusted in the block I can only think of bending it but then I’ll have to replace it 😅

[@davidphanh]

Do suggest doing the timing belt and water pump at the same time?

[@BoostedFilms]

[MienAce] yes.

[@hellbilly_fpv6692]

Where does that mounting bracket screw to? On the water pipe that you pulled the pump off of. My water pipe came out and I’m not sure why. I think the mounting bolt fell out

[@highnlowoutdoors9630]

Do you have an oil pump remove and install video?

[@edwardchuc2972]

No sealant on paper gasket ?

[@BoostedFilms]

Edward chuc nope. Goes in dry

[@Patrick5]

I'm collecting parts for a Clutch, Timing belt and water pump all in one shot. I just barely hit 56K on my evo 9.. planning it on around 60K

[@L3GACYxiNsTiiNcT]

Where is your source for torque specs?

[@Slonya23]

Is this motor stock ?

[@BoostedFilms]

yes

[@cenzolyksitruff]

Just had my timing done 100 miles ago, i regret forgetting to swap out the waterpump... it failed on me today

[@BoostedFilms]

:(

[@cenzolyksitruff]

@@BoostedFilms since you replied, any idea where to buy the timing tools?

[@BoostedFilms]

I bought mine from Jay Racing. www.jayracing.com/index.php?main_page=product_info&products_id=214

[@cenzolyksitruff]

@@BoostedFilms appreciate it, ill be using your videos for a reference, might pull the whole drivetrain considering i need a trans rebuild anyways!

[@BoostedFilms]

@@cenzolyksitruff Thanks, good luck with the work ahead!