MK4 Jetta Aftermarket Fog Light Install

[@VWASUTT]

I’m going to install a similar set but try take out the left light and install a turbo air inlet 🤞🏾

[@mirosawwojewodzki5360]

I'm going to be installing a similar set of foglights to my wagon sometime soon Thanks for the video, I'll return to this video for some additional guidance

[@CliffjumperCars]

Happy to be helpful!

[@jonathanflack8272]

Great detailed video as I am doing the same setup for my sons car. Could you provide a link to the ECS Tuning wiring harness you used? Thank you.

[@CliffjumperCars]

www.ecstuning.com/b-ecs-parts/fog-light-wiring-harness-for-oe-fogs/1jo998000/

[@EchoLostG]

Hi i have a question, I bought the same Fog light like ur, but it have yellow bulb so i bought new h3 white led bulb for it but it has 1 cable is it compatible ? or i should buy another h3 bulb with 2 cable on it ?

[@CliffjumperCars]

H3 bulbs typically don’t have a ground cable because the mounting ring on the housing acts as a ground connection. You can add one by soldering on a wire with the spade connector you may need to make it work, to swap bulbs.

[@EchoLostG]

@@CliffjumperCars Good, I thought I would have to buy a new one, but apparently it can be used, Thanks for answering.

[@georgerosales179]

The yellow wire that you connected to the factory fog light comes with the harness for the lower foglights?? My harness doesnt have it , what can i do in order to make factory fog lights work?? I already have the euro switch needed for it

[@CliffjumperCars]

It's part of the fog light wiring harness kit that's specific to the Mk4, you can get it from ECS Tuning. www.ecstuning.com/b-ecs-parts/fog-light-wiring-harness-for-oe-fogs/1jo998000/

[@georgerosales179]

Well my kit doesn't have those yellow wires , can I just use a couple of extra wires and quick splice connectors and connect em to one of the existing wires on the kit??

[@pablorojas6846]

what did you wire the bottom harness to? the one that went into the bottom fog lights

[@CliffjumperCars]

ECS Tuning Mk4 foglight wiring kit. I used low wattage LEDs in the factory foglight positions that are on the same harness, but used that wire to trigger the relay for the lower foglights.

[@yukie037]

into which hole did you plug in that blue wire onto the switch either im missing it or its just not there

[@yukie037]

and im not sure if i can do it since my car didnt come stock with foglights not even the ones in the headlight so i dont know if it will work

[@yukie037]

nvm i heard it now terminal number 8

[@CliffjumperCars]

@@yukie037 these instructions should help: blog.ecstuning.com/vw-mk4-fog-light-wiring-kit/