Fixing the John Deere 317

  Рет қаралды 6,976

mmrbeef

mmrbeef

Күн бұрын

Пікірлер: 16
@hunter7476
@hunter7476 3 жыл бұрын
What size tires are in this I would love to put bigger tires and rims on my 318
@williamriley2528
@williamriley2528 2 жыл бұрын
Yep, either the float adjustment height, or a bad needle &/or seat... (try throwing the old float in a small pan of gasoline...)
@buder5116
@buder5116 4 жыл бұрын
onan engine spoted !! i have 1 but unknow exact model and i made it work
@worriedstraw1827
@worriedstraw1827 4 жыл бұрын
I personally love the 317 and prefer the kt17 over the b43g but I've never actually seen this conversion in person. If I had to guess I think the carburetor just needs to be cleaned out and adjusted and or you have bad gas. It could also need a valve adjustment but I think it is fuel related. Just out of curiosity, do you ever plan to bring an original 317 into the shop? I'd love to see you fix one up.
@benkanobe7500
@benkanobe7500 2 жыл бұрын
The coil and condenser are almost always OK.
@JudyHess-lv9it
@JudyHess-lv9it Жыл бұрын
How to hook up coil
@williamriley2528
@williamriley2528 2 жыл бұрын
No Dielectric Grease...???
@chrisfieber6688
@chrisfieber6688 4 жыл бұрын
Mr. Beeeef I have a 87 318 with a b43g onan why dose the battery go dead after I am done cutting my lawn? And the battery light stays on while I am cutting please help if you can
@mrdooder1049
@mrdooder1049 4 жыл бұрын
Sounds like you have a charging problem. Either your voltage regulator is not doing it’s job or your stator is kaput would be my guess the pto clutch on the old Deere’s is an electric clutch so the whole time you’re mowing it’s drawing power from your battery that isn’t being replenished by the charging system
@michaelbenoit248
@michaelbenoit248 3 жыл бұрын
Your ignition switch might be a little gummy & leaking voltage.
@Formulabruce
@Formulabruce 4 жыл бұрын
cylinders got washed, I would do an oil change, I bet the oil smells like gas.
@mmrbeef
@mmrbeef 4 жыл бұрын
Yep :D
@modificationnation8554
@modificationnation8554 4 жыл бұрын
It sounds like you just need to adjust your carburetor.
@Greg_Gatsby
@Greg_Gatsby 4 жыл бұрын
So much gas sitting in the carburetor... Don't take the advice of an idiot, but I am curious about the possible presence of gas in the crankcase with the oil.
@mmrbeef
@mmrbeef 4 жыл бұрын
Absolutely there was tons of gas int he crankcase which creates a genuine concern that there was a good bit a wear to engine internals that occurred when it was running like that.
@brokenwrench1
@brokenwrench1 4 жыл бұрын
@@mmrbeef when the onan vacuum pulse fuel pump goes bad it will pump gas directly into the crankcase
Fixing the John Deere 317: Part 2
17:16
mmrbeef
Рет қаралды 3,4 М.
John Deere 318 Repower Install and Startup
12:40
David Frady
Рет қаралды 7 М.
Wait for it 😂
00:19
ILYA BORZOV
Рет қаралды 11 МЛН
Каха и лужа  #непосредственнокаха
00:15
MAGIC TIME ​⁠@Whoispelagheya
00:28
MasomkaMagic
Рет қаралды 38 МЛН
REAL MAN 🤣💪🏻
00:35
Kan Andrey
Рет қаралды 25 МЛН
JOHN DEERE 750 4WD COMPACT DIESEL TRACTOR
1:05
Montgomery Auction Services Ltd
Рет қаралды 1,8 М.
Fixing the Sloppy Steering on My JD 430 Diesel
37:09
Todd's House of Speed
Рет қаралды 437
Projects Updates 1-7-24
6:00
mmrbeef
Рет қаралды 899
Not Much Wrong with This 644H John Deere Wheel Loader
20:43
DontbeWily
Рет қаралды 8 М.
John Deere 318 Repower Plans and Onan Removal
3:39
David Frady
Рет қаралды 5 М.
4066R mowing hay
0:41
Jason Kendall
Рет қаралды 30 М.
Wait for it 😂
00:19
ILYA BORZOV
Рет қаралды 11 МЛН