How To Checker A Gunstock - Completion Of A Custom Rifle Build

MNR Hats: www.mnrcustom.com/sale
Instagram: / mnrcustom
Website: www.mnrcustom.com
From laying out the pattern to cutting the mullered border. Check out more projects at
-------------------------------------------
MNR Custom LLC Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZbin channel.
Do not attempt to repair or modify any firearms based on information found on this KZbin channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
MNR Custom LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZbin channel (MNR Custom LLC) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZbin channel (MNR Custom LLC) or in this video.

[@ashokrajasingh2413]

Amazing video. I have searched for 10+ years for a practical demonstration of how to lay out a stock pattern and alt last I found this. Thank you.

[@thisisyourcaptin]

I did a back flip right outta my chair when I saw your vid upload. Made my day. The saddest part was when it ended. Y’all need more of these up here. We have emailed a few times about pattern stocks. Can’t wait to send mine up to have it made into reality. Damn fine work y’all keep it up.

[@mnrcustomllc8253]

Thank you Nate! I greatly appreciate your kind feedback.

[@michaelmichaelson8452]

Outstanding workmanship!

[@rla1000]

Amazing work, beautiful.

[@gumboot65]

Beautiful work Matt ! Beautiful rifle also. Very impressive !

[@mnrcustomllc8253]

Thanks Glen!

[@zorngottes1778]

Great craftmanship

[@MrJohnericsantiago]

Beautiful work!!!

[@cutelariasouza3742]

Belicismo trabalhar, uma obra de arte!!

[@Shan-sg7mm]

Hats off to your patience brother

[@dominicbianco3826]

You make it look so easy.

[@taweesak-8441]

I really want a carving knife like this. There is nothing like this in Thailand. I like watching your channel, it's helpful, good skills.

[@brsmith2801]

Absolutely gorgeous!

[@joetrump5844]

This man makes making a knife 🔪 from scratch........ child’s play. Once he starts scratching.......... He is one with the rifle stock !!!! Amazing......thank you for sharing.

[@mnrcustomllc8253]

Thank you!

[@mikeleschber33]

Amazing craftsmanship! You make it look easy and so precise.

[@mnrcustomllc8253]

Thank you!

[@Darbeye]

Wow! Beautiful work sir

[@jackiedenton650]

U have skills like no other just remarkable. With the beautiful work you do would so watch more of these videos and would love to learn ho to do it my self

[@simon_hawk5758]

Incredible!

[@greggjohnson7667]

Phenomenal!

[@innocentrajeshravi2615]

Excellent work... Good job..

[@agVTEC1]

Wow beautiful work I wish you could do that to my gun stock.

[@seymourbutts4463]

You're crazy good. Wow🤯

[@rafaelpereiradesa8066]

Perfeito, parabéns pelo belo trabalho.

[@mnrcustomllc8253]

Muito obrigado

[@wmharris9084]

beauty. nice work

[@dillee9988]

That is what I call a lockdown job. I would love to do that to mine, but too scared of stuffing it up.

[@nicolgiulio]

Sembra facile, ho acquistato un incisore, provando su un vecchio calcio, non viene una riga diritta. Complimenti a lui.

[@kevinkitts7200]

Absolutely beautiful and holys%$! Excellent work keep it coming I'll watch all day

[@andrewdavis5404]

Outstanding work mate

[@mnrcustomllc8253]

Thank you!

[@thomassullivan1207]

That was so badass. Absolutely stunning. I have an old Savage 340C that I'd love to get this done to. I know it's not an expensive or rare rifle, but my grandfather bought it in the late 60's and it's not about the value of the rifle for me. And the stock is so smooth and I'd love some grip on it. I wonder how much does a job like this costs? I kind of doubt there is a guy out in Northern California that could do quality work like this either.

[@mnrcustomllc8253]

Thank you! Feel free to contact us regarding your savage project. We'd be happy to help.

[@gunhappyie]

Making it look easy 😋 great work and keep posting videos please

[@Nello353]

You made it look easy,I,ve tried it, and quit, I had better luck carving oak leaves on the grip. Had I seen this video 50 yrs ago I would have a better chance of suceeding. Great work you are a true craftsman.

[@chetan.gondaliya]

Awesome 💖💝🙏love and respects from india 🤗

[@user-iu2cy9xz9s]

Nice job! So easy to watch it, but very hard to do.

[@michelmusset4325]

Bravo, magnifique

[@mnrcustomllc8253]

Thank you!

[@andyp9678]

I wished you could do a more detailed video just on how you do a mullered border and the tools you use

[@mnrcustomllc8253]

I'll keep that in mind for future videos. Thank you for the feedback.

[@biakmawiab.pachuau5924]

Beautiful gribs....

[@steveokon5431]

Beautiful !!

[@mnrcustomllc8253]

Thank you!

[@analaurarockerfilth6987]

Exellent work máster

[@mnrcustomllc8253]

Thank you!

[@user-dx1qo1ic9v]

Good job!

[@chicotudo4282]

Parabéns pelo seu belíssimo trabalho e uma belíssima música parabéns

[@mnrcustomllc8253]

Obrigado!

[@konstantinzhdanov5461]

Excellent! 👍😊

[@markpotter2485]

WARNING. It is NOT as easy as this craftsman makes it looks! You will Need GOOD tools and a LOT of practice! :D Good luck!!!

[@sergeycherkezov9882]

Очень кропотливая работа но результат прекрасный и инструмент профессиональный.

[@kentuckyjustice1408]

Good looking stock - lots of patience.

[@mnrcustomllc8253]

Thank you!

[@johnfrancis2215]

What really pisses me of is you make it look so easy, and anyone who's had a go realises it isn't. Brilliant job matt

[@mnrcustomllc8253]

:) Thanks John!

[@samuelsilvadesousa443]

Perfeito

[@aldogressa6708]

Fantastic !!! Where I find the names of the files. Grateful.

[@muqllidagah9336]

Super !!! 👍🙏

[@CarlosGonzalez-eo6px]

Hermoso trabajo felicitaciones ? Dónde y como se adquieren esas herramientas?

[@kathireshgun9087]

Awesome

[@mnrcustomllc8253]

Thank you!

[@anhvuong3219]

👌 yes

[@desseretta2001]

Amazing work, what kinda engraving tools do you use?

[@mnrcustomllc8253]

Thank you! Ullman precision

[@tedmz9246]

Wow. Amazing. All that done in 11 minutes 18 seconds. Lol

[@mnrcustomllc8253]

LOL

[@wydhunter9002]

Woowww 👍

[@alanoaraujo304]

Parabéns muito bonito como que chama o nome dessa chavinha

[@laxmanvaghela6312]

👍👍👍👍👍👍👍

[@maineoutdoorsman677]

I bet he practiced on a lot of wood before he even touched a stock

[@mnrcustomllc8253]

That's for sure!

[@user-uj2kp8xk6x]

👍👍👍👍👍 . 👏👏👏👏👏

[@ricardovieira8292]

Parabéns trabalho que exigi muita técnica e paciência Qual o nome dessa ferramenta

[@carlosrenatopereirageraldo7770]

Zigrinador.

[@carlosrenatopereirageraldo7770]

Mercado livre está tendo pra vender.blza

[@ricardovieira8292]

@@carlosrenatopereirageraldo7770 acabei de ver no mercado livre mas achei muito caro

[@carlosrenatopereirageraldo7770]

@@ricardovieira8292 bastante dinheiro. Mas foi o único kit que achei pra comprar no Brasil.

[@brothertvskek847]

Nice

[@mnrcustomllc8253]

Thanks!

[@andyp9678]

for once it was nice to see someone who actually knows what they are doing, not like some half wits on here, well done sir

[@mnrcustomllc8253]

Why thank you! Glad to know I'm not a half-wit :)

[@GlockmanGG]

Nice work , what kind of a set of tools do you need to start this

[@mnrcustomllc8253]

You'll need a spacing tool, a 60 degree cutter and a 90 degree cutter. Check out Ullman Precision.

[@transformer889]

I love the chicken dance music

[@valeraav70]

Saludos como se llama esa herramienta x favor?…???

[@lehuylamhuy6648]

Đẹp.. nhưng còn ếch lắm

[@inayatkhan7217]

Outstanding work... I need this cheakring setup plz some one help me how i can get this tools and other things

[@greggjohnson7667]

Midway USA or Brownells Inc Montezuma Iowa USA

[@ritaejohn]

How long from start to finish? 10+ ************* in my book!!!!

[@mnrcustomllc8253]

I'm not the fastest checkerer, so plan for 16-20 hours for a wrap-around point pattern.

[@cicerodosanjosbezerra6922]

Como se chama essa ferramenta?

[@zorngottes1778]

Done by me: 5 min and this thing would be ruined.

[@nunyabidness6973]

What's that tool called that you used for the layout?

[@rdrun51660]

Hi Matt, I have a S&W 686 that I put wood grips on, I would like to checker them for grip and looks. What is the best way to get hold of you for an estimate? Thanks

[@mnrcustomllc8253]

Hi Bill, you can shoot me an email. [e-mail]

[@RicardoSteigleder]

Hello, I live from Brazil and would love to do the "checker" in my work, but here I can not find the tools for it. Could you tell me which tools I need and any websites that can import these tools?

[@mnrcustomllc8253]

Hi Ricardo, I'm not sure about exporting to Brazil but the best checkering tools are from Ullman Precision Products. www.ullmanprecisionproducts.com/ Their cutters last far longer than any others that I've used. Good luck!

[@joseluisceballos4577]

uct

[@RicardoSteigleder]

@@mnrcustomllc8253 Tksss

[@kishankharke5549]

How to make sports pistol grips

[@richardhatt6541]

I can't find your page. How do you price your work, but inch or by pattern? Do you have a price list?

[@mnrcustomllc8253]

www.mnrcustom.com We quote each project individually.

[@kieranh2005]

What sort of pencil are you using?

[@mnrcustomllc8253]

It's a soft tipped white pencil. You can find them at Brownells.

[@romulopereiradasilvaramalh6397]

Musica brasileira?

[@cicerodosanjosbezerra6922]

What is this tool called ?

[@cesarortigoza3460]

Can you show us your tools?

[@mnrcustomllc8253]

Tools are by Ullman Precision. I'll try to make a video in the future showing the different tools.

[@hectorlinotorres5721]

SEGRINADO

[@user-rj7lt4px1y]

С каком маслом смазывайте?Лак или масло?

[@edilsoncosta7682]

Estou querendo adquirir um jogo deste mais não consigo já tentei te tudo será q é tom diesel este o pobrema no Brasil não se consegui nada

[@valdemirvieira1989]

Também já procurei e não acheii

[@dontcallmetravis]

I turned the video down to 25% speed. I wish he would have included the name of the tool he’s using.

[@domillysilva6267]

Hello how are you?Salve

[@richardhatt6541]

Did you bring the diamonds up to points? It looks like the tops were a tad flat.

[@mnrcustomllc8253]

Yes we did. Once the diamonds are complete you should see no shinny finish on the tops when put in the light.

[@danielharris3827]

where can I purchase tools?

[@mnrcustomllc8253]

Ullman Precision

[@danielharris3827]

@@mnrcustomllc8253 Thank you!

[@danielharris3827]

@@mnrcustomllc8253 Looking at your website, Wow! Beautiful work! I am inspired. Did Yavapai College teach you to make the stocks?

[@mnrcustomllc8253]

@@danielharris3827 Thanks! Yes, I learned how to make my first stock at Yavapai when Robert Szweda was the stockmaking instructor.

[@boranman9842]

Live live❤

[@manuelscalcon9492]

come si chiama l'attrezzo che usi?

[@alziro3496]

how many dollars is 22 LPI tools? I’m from Brazil and you don’t have to sell here.

[@alziro3496]

the same LPI that you used?

[@mnrcustomllc8253]

www.ullmanprecisionproducts.com/

[@alziro3496]

@@mnrcustomllc8253 thank you brother

[@Dwyer88]

Beautiful work!

[@monkeygun2783]

sensacional e maravilhoso trabalho, parabéns!

[@mnrcustomllc8253]

Muito obrigado!

[@mnrcustomllc8253]

Muito obrigado!

[@kathireshgun9087]

Nice

[@mnrcustomllc8253]

Thanks!