Modded NERF Blasters Hurt Reeeeally Bad. Real Bad.

[@ModernRogue]

It takes just three items will make your ho-hum wallet a SO-FUN wallet and we’re giving them away this week in our free giveaway-it’s the Badassify Your Wallet Bundle! A folding knife hidden in the shape of a credit card, an all access multi-tool card, and our original “Get Out Of Jail Free” card. They fit it any wallet and make you hyper-prepared. Check it out here: www.scamstuff.com/products/badassify-your-wallet-bundle We’re giving away the Badassify Your Wallet to FOUR winners of our free giveaway at gimme.scamstuff.com (no purchase necessary, giveaway ends 8/26/2021). Congrats to the winners of last week’s Scam Cash giveaway: Dimitris Dendrinos Dimitriou, Michael Lafferty, Adam Wolczuk, Jeremy Byars, Joyce Du, Aric DeLaney, Lachlan Choy, AJ Bowen, Charles Morehead, and Kim Krantz (we will contact you via email within the next two weeks).

[@agoristacregardens3787]

Y'all need to collaborate with ctrpew

[@kirkw1740]

Schmectrum sounds like Bell Canada and their fraudulent charges. The only real way to avoid those charges is to never agree to be their customers.

[@jensontaylor4801]

So of all of the nerf stuff yall have posted I appreciate but before yall get too deep into the electrical side of the nerf modding stuff, Please try to contact me cause I would love to bring some of my stuff out to Texas and show yall some stuff

[@EightsofSpades]

Can you load a .22 blank into the back of a nerf dart

[@calvinaliceashvyer689]

Just to be sure, the guy who goes to card shops at 7 am to play d & d believes that the penis pump in that next gun could blow the brass pipe from a barrel obstruction. Maybe nerf guns aren't for him anymore than real guns.

[@WalcomS7]

So imagine, if you will, that you're thousands of miles from home and you're trying to show your hobby off to two of your heroes. On camera. You're terrified, nervous, worried... and then all of the Ted and Gary stuff happens. It was wonderful. Grab a blaster, make it your own, and fling some foam. Thanks for the opportunity to show what we do to a whole new audience, and I hope we get a chance to show The Modern Rogue an actual nerf war in the future!

[@ModernRogue]

You were FANTASTIC!!!!

[@quillclock]

thank you for the niche knowledge

[@feedbackzaloop]

You practically brought a gun to a nerf fight and starting exercising dominance right away

[@ThunderChunky101]

Holy sh** I knew you'd be in the comments as soon as I saw the video! Haha.

[@spacedout4061]

It's so insane that ur a special guest

[@willmfrank]

"Is that a possibility?" "If you are really dumb." "That's a possibility."

[@immisternobody6563]

First time back on this channel for a little while. This was the gold I was looking for.

[@jaxman682]

I love how there's a transition from Walcom's expression of "I'm gonna let these guys talk while I do the work" to "Hold on, I wanna hear this" and so he stops what he's doing so he can focus on the conversation of Ted and Gary.

[@goldencalf13]

Not many people know about GERF

[@feedbackzaloop]

Really like how the main concern of a gun snapping under extra spring tension is need to buy another one

[@SivaExperiment]

or having to design your own catch and stuff to CNC mill

[@PureCountryof91]

@@SivaExperiment lost investment casting using a 3d printed part, and plaster mold. Aluminum internals will be light, and not terribly difficult to melt aluminum or clean. And should be much stronger than any plastic. But also way cheaper than CNC..

[@SivaExperiment]

@@PureCountryof91 oh yeah your probably right but the first thing that came to mind was CNC lol

[@PureCountryof91]

@@SivaExperiment nah. CNC would be better. But casting can be accomplished at home is all lpl

[@mitchhifi9192]

@@PureCountryof91 Any SLS print would probably be stronger than a home cast, unless you're dealing in alloys and have a furnace in which case Worker probably have a CNC alloy kit for what you're making and would be much cheaper

[@trevorminton6084]

This guy's charisma is incredible. I've never been so okay with someone getting hurt in a video

[@BigE1986]

Let's be honest nerf is now being designed by kids who grew up playing with nerf and is making them better. Several of the nerf bladters are clearly designed with adults in mind

[@notmuch_23]

Then explain the glued/welded shells of the Elite 2.0 that renders them practically unmoddible.

[@baldur3365]

Dart zone all the way

[@gdfish3532]

@asdrubale bisanzio they're losing market share to zuru and want to save a few cents on fasteners so they don't have to lower dividends.

[@shadyonice]

@@notmuch_23 The secret engineer got caught and was fired

[@crazyasianninja218]

@@gdfish3532 at this point I think they're surrendering the performance/hobbyist market share to everyone else. Their target at this point seems to be kids and licencing deals.

[@wicklash9065]

I love this guys energy. He is so passionate, and anyone whos ever been that passionate about something can relate to.

[@BrxIghtside]

Checkout lorddraconical hes better

[@Kryynism]

@@BrxIghtside yeah the card shop robber, he's great. 😂

[@BrxIghtside]

@@Kryynism card shop robber?

[@jungleman3321]

I'm so glad the Nerf blasters have turned into a sort of series of their own. :)

[@AlphaMachina]

lol I love this.

[@billyhendrix5544]

Thank you so so much for not having ads in the most annoying of places. Myself and I'm sure many others appreciate it.

[@DocJackson96]

The spontaneous improv skit about Gary assassinating an ice cream man in Tijuana is my favorite part of this video tbh.

[@VelvetTeacake]

This looks like it has great potential for the injury counter

[@JakeND]

Or a cease and desist

[@TheRealAlpha2]

They didn't add thumb tacks to the end of the darts, so no counter reset... yet. (Disclaimer, don't do that. that's just psychotic)

[@tankprohp]

Small welt that will be gone in a day we used to put snappers in the tips of darts, for like a cap gun vibe, used to throw those at each other for tag and you're worried about this...really

[@sackthing986]

Especially when you have vinyl tipped darts

[@biosaber585]

There's videos of air blasters people have built legit breaking the skin

[@ggeorge6458]

Modern rogue: "saying firearm is risky business here on KZbin" Also modern rogue: today we're shooting a drone at the sky with shotgun using rare modified rounds

[@danielgreenwood8000]

Man its good to see people still screw around with nerf modding. I still have my brass barrel xbow somewhere.. ahh the memories

[@abominablesnowman646]

I remember my first mod was just 2 springs together to make a stronger spring lol

[@Olewis1995]

@@abominablesnowman646 mine was the penny mod on a maverick. Well after the Mavericks were definitely obsolete.😂😂😂

[@AceOfBlackjack]

@@Olewis1995 a what mod?

[@aaronstevers5015]

@@AceOfBlackjack ya just taped together a few pennies and put them behind the spring, effectively increasing the tension on it when primed.

[@AceOfBlackjack]

@@aaronstevers5015 how would you achieve this?

[@RandallStephens397]

I'd love to see a supercut of the rogues being good at tools.

[@thatdudnum67potatoe45]

oh all 2 times?

[@WillTheUndeadSmore]

@@thatdudnum67potatoe45 you think it was a whole two times? you're giving them credit.

[@thatdudnum67potatoe45]

@@WillTheUndeadSmore yeah yeah ill be honest all of the half of one time

[@willmfrank]

If you had a nickel for every time the boys were good with tools, you could make a down payment on a stick of gum.

[@TheRealAlpha2]

MR: we're great with tools! _(cut to 45 minute compilation video of several bloody injuries and near fatalities)_

[@sadlad6182]

The crossover I was never expecting, this is amazing

[@austingarrett3334]

The dad instincts have embedded in both of our favorite hosts very strongly.

[@thomasthecrunkengine3512]

Cameron’s laugh is genuine happiness, love it.

[@alaeriia01]

I still cannot believe Walcom's name is Cameron. That is such a perfect name for him.

[@jackwriter1908]

Me seeing the Thumbnail: _Is it wrong that I just clicked on it to watch them hurting each other? Naaa, who cares if they hurt each other!?_ *FIGHT! FIGHT! FIGHT!*

[@Epicmonk117]

As long as they both consent and they're just inflicting pain and not injury, it's fine

[@notmuch_23]

For anybody that wants a good starter mod, the Zuru X-shot Reflex 6/Adventure Zone Destroyer (the Reflex 6 may have different names in different languages, but I know it's available in North America and Japan) is very easy for a first mod, and can hit hard by replacing the stock spring with K25, and gluing the two parts of the revolver cylinder together. It's also a practical sidearm for a battle.

[@slobodatom96]

I'd love to see them do a DUELLING video with those things. Maybe all the different kinds/rules for different kinds of Duels

[@TheStrangerous]

Yesssss

[@slobodatom96]

@@TheStrangerous A fight to the pain to claim the eternal title of Gentleman/Scholar/Judge of Fine Wine!

[@Jamel_MB]

"You WERE a man of honor, Ted.." Had such great delivery

[@CowboybubPercussion]

The crossover I NEVER expected and never knew I wanted 🤣

[@8stringmonkey]

I wonder what would happen if one of those foam darts "accidentally" got soaked in resin overnight.

[@MrSchism]

Regarding the promo: you're in collection either way. They'd have put you on collection as soon as the Privacy card burned.

[@Tcustoms]

“Never in my life have I needed something so much and didn’t know until I received it.”

[@liamgreen1982]

ALL HAIL KING VEGETA

[@tankprohp]

Check out a blaster called the Lynx by orion blasters

[@Tcustoms]

@@tankprohp “Oh it’s beautiful.”

[@internetpizza]

I was part of the nerf modding scene way back in the early 2000s, it's really cool to see what techniques stood the test of time.

[@mitchhifi9192]

Mainly brass and electrical tape hahahah. Good to see half darts/Stephans. Though nothing beats my old cut up darts with fishing weights hot glued in the tip.

[@internetpizza]

@@mitchhifi9192 back when mag-fed blasters were just a dream and using flywheels would've gotten you laughed at

[@mitchhifi9192]

@@internetpizza yeah they had that buzzbee Tommy Gun thing and that was about it haha

[@Ki113r210]

thought i heard jason say welcome realized a moment later what he actually said. fanboyed. this is the most ambitious crossover

[@TheRealAlpha2]

Icecream _does_ sound wonderful, as does a nerf -gun- blaster that can leave a mark on human skin...sadly, I can only have one of these... although with one I _may_ be able to procure the other.

[@PAPO1990]

interestingly, due to so much of the global nerf community being based in the USA, many of us globally use "fps" to measure muzzle velocity as well, even if we normally use metric in our daily lives. In fact, m/s while I prefer it in a scientific sense, still feels unrelateable to me, and for some reason none of us use Km/h.

[@robertfrank16]

Tin Foil Hat Time: I wonder if some people in the modding community actually work for Hasbro, actually designing making the Nerf guns and then put in the safety features, knowing full well that people will get rid of them to make them better.

[@alwaysfallingshort]

Trust me, no one in the community wants to work for Hasbro, they're shitting the bed hard. Dart Zone is where it's at, right now.

[@ericjustice5742]

Brian does a really good impersonation of Crispin Glover's, George McFly. I was waiting for him to say, "Hey you, get your damn hands off her!"

[@cornholio.2110]

I'm so glad these two are friends and make a watchable program

[@brannontirin]

"This is starting to look like something that starts with a letter G..." What? Nerf didn't already start off that way?

[@maskedrecruit4571]

I'm glad to see someone like walcom on The Modern Rogue! I wouldn't expect him to be here

[@MrKrimson]

somehow the gap between nerf and airsoft gets even closer and im all for it

[@breedlove94]

I appreciate how Jason Murphy has TWO alter egos named Gary

[@Judgement_Kazzy]

Alt title: "Jason Murphy Gets Hit by a Small Piece of Foam and F*cking Dies"

[@GTechOfficial]

The fact that you two went into a several minute improv session had me rolling

[@madgorilla32]

Watching this before it gets taken down, also would love to see you guys go through what's involved in a duel

[@GoofyAhhMods]

1:10 the walcom laugh gets me every time

[@comradebraveheart7218]

Ditto

[@justinbrown9711]

Getting to mess with those when we came down to MR HQ was a blast! Thank you, Walcom!

[@WalcomS7]

HAHA! The gift that keeps on giving!

[@jacobcasmus1882]

You went to The MR Headquarters?! What? When? and How?

[@justinbrown9711]

@@jacobcasmus1882 taught the Rogues how to throw axes.

[@sparklyracer44]

This is a type of friendship I look for, Brian and Jason are friend goals

[@oxolotleman7226]

Holy crap, walcom

[@themandalorian9511]

Thank you for showing off the Nerf hobby to more people!

[@Kuli24000]

Walcom is there!!!! So cool! Very gutsy doing a knockout short dart mod so quickly and in front of people. Well done!

[@kylecueto]

This is so cool. Two of my favorite channels making a collab video. I am so happy.

[@MatthewReardon]

ok this guy has an amazing voice, went over to his channel and subbed just for that

[@johndoriansmith]

Walcom has returned! Hype!

[@liquidbrainstorm]

This was prime modern rogue. The topic, the energy, the jokes. Oh how the mighty have fallen..

[@revolver265]

This video comes at the right time! I've got an original -Longstrike- edit: Recon I got as a kid, and want to put it back together, fix it up, and do some spring upgrades, or just start firing tampons like a particular Australian...

[@Makron5]

The secret to screws is to have a cup, put the screws in the cup and you'll always have less problems. If you need to go better, get more cups, those little bathroom cups are probably pretty good if you have them

[@ricedbroccoli]

Ramekins are good too. There what I use

[@surytrap]

the fact that every time we see a nerf gun being modified and it ending up looking more like an actual gun just proves the ingenuity of guns and human nature

[@trailblazer632]

Pandoras box has long been open lol

[@The4thaggie]

A note about your sponsor. I’ve used Privacy for years. I’ve had so many cases where my CC was stolen from sites that don’t accept PayPal. Love Privacy. Only issue sometimes is my payment processor doesn’t like it, or my apartment charges me a grotesque ($30) convenience fee on my $1000 rent/utilities. Oh well. It’s worth it. AFAIK it ties into your bank not credit accounts, but could be wrong

[@GoofyAhhMods]

I didn't expect walcom to pop out of nowhere

[@alecjahn]

We used to mod NERF back in the mid/late 00s. Buncha high school kids, my dad had (has) a lathe that I grew up using... So.... things happened. Ended up chucking a whole box of rare, older (even by 2007 standards) models/parts into a big box for a garage sale (dangerous stuff removed), for $5 just to get rid of it. Bummer. I kept one very modified blaster and a handful of homemade hot glue darts. Can't QUITE remember where it is now...

[@NightFury-jd8ce]

Yay WalcomS7 as our new cameo Foam Flinging villain 🤣

[@spiranomad]

Hellz yea, 2 of my favorite KZbin channels in 1 awesome Collab

[@peterterry7918]

Seeing Walcom here on Modern Rogue makes me happy!

[@lovefonseca1626]

I wonder if Bryan just thought Jason was crawling on top of him before he said he was reenacting the reservoir dogs ending 😂

[@hmsquared8603]

As a theatre student, seeing Brian and Jason yes and each other is magical.

[@ChadWinters]

“NERF: it’s not fun and games until someone loses an eye”

[@OCNerf]

Walcom doing the Lord's work.

[@weedfreer]

Anyone else feel that this concept needs expanding into a series? I need to know what happened following the shoot out and what the next new ice-cream flavour!!!

[@flamecrew9atroblox958]

This was one of the best in a while. The acting skills.

[@gigglesgames1]

I need more chronicles of Ted and Gary

[@everettcootes4403]

Was not expecting my favourite nerf KZbinr to show up on my favourite channel amazing collab

[@ravenlord_xix]

The rogues should definitely do a Western Quick Draw with the two modded Nerfs

[@TheStrangerous]

We're working on something like that!

[@JRockySchmidt]

Righty tighty lefty loosey is always great advice, unless it come from an outside source, then it's a great dig

[@voidwalker5784]

Oh YEAH WALCOM!! There he is in his nerf glory!

[@zeta2988]

This is the first video I’ve ever seen of you guys but the first minute and a half convinced me to subscribe

[@jamesbeattie8800]

Best collab: WalcomS7×Modern Rouge

[@ZombieDancer]

I love Walcom's laugh. Great collaboration

[@nialls1048]

The Reservoir Dogs quote was so perfect. I knew exactly what it was immediately 👌

[@daftmi9hty327]

22 minutes of three fully grown men shooting each other with nerf guns

[@ModernRogue]

accurate.

[@durga5615]

Extremely accurate

[@DjurrenArt]

That improv bit halfway through is the highlight of this vid.

[@adamgardiner5869]

Yoooo, it's Walcom! Bringing the gospel of Nerf to the masses.

[@bcsmith]

Remember kids, don’t sniff glue…

[@Phoenixsims.02]

this does not look good to convince mom into letting me have a 300 fps blaster

[@SaitosaBard]

Damn, that's a very stressful situation, Brian. Hope it resolves well for you and the shmectrum guys step on a bunch of legos repeatedly.

[@B455PL4Y3R]

What a charismatic young man, you can tell he is a nice guy

[@firesoldier9017]

ITS THE WALRUS I WAS NOT EXPECTING TO SEE HIM HERE

[@denniscrossan1419]

Seeing Walcom is a surprise but a welcome one.

[@urban1337]

And that’s the last we ever heard of Garry and Ted

[@GSZ28]

2 of my favorite channels come together to make the ultimate video! NICE!

[@TheGodOfAllThatWas]

Those shmectrum guys. Even if you used privacy you'd still have the collection guys calling you. You'd have I think you said 10 months more money in your pocket. But I still think you'd need to get a court involved. $600 in your pocket and a $400 collections case does sound a lot better then $600 just given to shmectrum and a $400 collections case though.

[@christopherjones8044]

Heck Yeah, My two favorite channels collide, WalcomS7 & The Modern Rogue!!! Sorry I am fangirling

[@tylerhunt5578]

This is not a crossover I expected to see today, but I’m glad to see it

[@vegeta420z]

18:18 would love to know the weight of those darts (preferably in grains) then I could calculate the muzzle energy in FT/LBS.

[@GannAinm]

The deeplore is something out of this world.

[@TheStrangerous]

I don't even understand it any more.

[@juderudd1711]

So cool to see Walcom join you guys

[@aaronrs7895]

Gary needs to be a voice actor for games. "you were a man of honor" paired with that voice... you've got a good rogue game

[@TheRealHusk]

You should get one of those buzz light year blasters and modify that, it already shoots incredibly hard and fast. It usually fires the short nerf rounds, putting a long one inside makes it actually dangerous.

[@balisticren6155]

Glad to see the superbad crew back at it again

[@iggysixx]

I love that modding toy guns involves professional scientific measurement tools. Hobbies always get out of hand with me too ;)

[@BurnedJello]

The Reservoir Dogs ending killed me. I gotta go watch that now

[@jm-rz3in]

I loved seeing these guys working together.

[@theunamedpotato]

I was NOT expecting Walcom

[@renownedisland1]

Worlds greatest fucking collab, modern rogue with walcom

[@anarchisttutor7423]

The amount of work going into this to get what they want should show manufacturers they could make a lot of money making adult foam guns.