Modded Razer Huntsman TE Typing Sounds ASMR I ePBT Shushi, lubed switches & stabs, dampening foam

[@daisyytrang]

asmr

[@sxmpley9652]

Can u make a video and show us how to do it?

[@ThinhTran21]

I just uploaded a video doing the same mods to a friend’s huntsman mini. Here’s the link to that video kzbin.info/www/bejne/fGavknd4bs2aa5o . RandomFrankP also has a video on how to do these mods that go in deeper detail if you want to check it out m.kzbin.info/www/bejne/qJCyloOGebl5jLc . The process is the same for the mini and the huntsman TE. Thank you for watching!

[@ThinhTran21]

This video is also useful as a guide to take the huntsman TE apart kzbin.info/www/bejne/hKetYqCeZ72enKs

[@zoonafy]

i have a problem where my hk gaming 9009 keycap set fits except the spacebar. it doesnt go on properly and its really annoying. any suggestions on how to make it fit?

[@ThinhTran21]

Is it the right size? The huntsman got a standard bottom row so it should be 6.25u. And I just remove the stabilizers legs from the stock space bar and put it in the new one and press the spacebar on the keyboard until it snaps in place on both sides

[@zoonafy]

@@ThinhTran21 yeah it is its just really odd. its like the pbt is too thick

[@ThinhTran21]

@@zoonafy I'm sorry but I know know how to fix that :-(

[@sumsum1738]

can you pop out the switches on the huntsman te like you can on the huntsman mini ?

[@ThinhTran21]

Yes! They're very similarly constructed. You just need to press the two tabs on the side of the switches and push the switch down after opening the keyboard up. Just be careful because they fit very snug to the PCB/plate

[@sumsum1738]

@@ThinhTran21 can u show me how exactly ? Im a little scared on doing this do u have a instagram or snap i can contact you on

[@sumsum1738]

@@ThinhTran21 how thick is the foam inside the keyboard

[@ThinhTran21]

The foam I used is listed in the description with the link to get it. But it’s pretty thin (0.10 in) and you could use something thicker, maybe up to 0.25 in. It’s really a pain to take apart the keyboard but I also did the same thing to my friend’s mini and uploaded a video of the process here kzbin.info/www/bejne/fGavknd4bs2aa5o . At around 0:31 seconds is when I popped the switches out. I used my fingers at first just to push the switches through but it got sore so I used a switch remover to squeeze the tabs at the sides in while pushing down on it.

[@ThinhTran21]

kzbin.info/www/bejne/gWa4omadrNiCgck this is also a good video to check out if you want a step by step guide on how to take apart and mod the keyboard. It’s a video on the mini. But the process is almost identical for the TE