Model Snow and Ice | Woodland Scenics® | Model Scenery

[@ModelSceneryExpert]

Thanks for watching! Click the description for products used in the video. Subscribe and click the bell to be notified of future videos. Be sure to follow us on social media for announcements, tips and more Facebook: facebook.com/WoodlandScenics Instagram: instagram.com/woodlandscenics Twitter: twitter.com/WoodlandScenics

[@KitClan]

For the effect of snowfall, couldn't you just take an old sifter with a handle and, turning the handle, take the sifter over the layout as if it were 'snowing'? Hold over the areas you want to 'build up'. I would think you'd get a pretty good snowing effect.? YourConscience

[@ModelSceneryExpert]

The best way to model a realistic water area is to use dark and light shades of color with Earth ColorsTM Liquid Pigment. Start with lighter color around the edges, such as Stone Gray (C1218) and use a water ratio 16-parts water to one part pigment. In the center of the water area, use Slate Gray (C1219) or Black (C1220) to model deep water with the same ratio. Be sure to blend the edges where the paint shades meet to avoid harsh transition lines and model changes in depth. Happy Modeling!

[@wilsocn]

I have found that a great way to add realistic ice to my layouts is to add tap water to my display and then turn my heat off for the winter. It saves money too.

[@ModelSceneryExpert]

+wilsocn Hahahahaha! That's awesome!

[@davo1633]

+Woodland Scenics where do I get all this? I'm thinking of making a winter diorama and need some good supplies for the job

[@littlegplumkin]

+DSM_stop-movies I live in the uk and found the whole set in hobby craft, and then bought a few extras (scenic cement and spray bottle) on amazon/ ebay

[@ModelSceneryExpert]

+DSM_stop-movies you can use our Store Locator to find your nearest hobby shop or you can order directly from our website. Here is a list of the products used in the video: Soft Flake Snow (SN140) Flex Paste (C1205) Realistic Water (C1211) Water Effects (C1212) Earth Colors Liquid Pigments (C1215-C1223) Earth Undercoat (C1228, C1229) Scenic Cement (S191) I have added both links below for your use. Good luck on your diorama! Store Locator: woodlandscenics.woodlandscenics.com/show/information/DealerSearch?ws Woodland Scenics Website: woodlandscenics.woodlandscenics.com/show/category/Products

[@WAVP371]

That's very funny...😂

[@dianapengitore8002]

Thank you for a great tutorial. I am just getting started with model railroad layout building and this was very helpful for my Winter scene.

[@ModelSceneryExpert]

We are so happy you found this video helpful! Happy modeling! :)

[@thunderbirdsix]

This is just fantastic! Thank you so much for sharing so many different techniques. I live in Australia where we don't experience too much snow normally :p so this will help a lot with a northern hemisphere Christmas layout!

[@ModelSceneryExpert]

Water Effects will dry to a consistency similar to a pliable rubber. It will not be completely hardened when dry.

[@jeffiow]

i used white undercoat paint on my snow scene layout ,looks quite convincing

[@roopeshkrishna34]

Million thanks for the great video..

[@kevinvega78]

Awesome video thanks Woodland Scenics!

[@johnkelley9877]

Simply incredible! I will soon be buying these items.

[@ModelSceneryExpert]

To incorporate a waterfall within a winter scene like the one modeled here, it must be added after the Realistic Water pond is completely dry. To give the waterfall a frosty look similar to the pond, mix a couple of drops of White - Earth Colors Liquid Pigment into the Water Effects before shaping the waterfall. Watch how much pigment is added, because a little goes a long way. Hope this helps get you started. Happy Modeling!

[@andyrbush]

So informative and well presented thank you.

[@starlighter191]

Great tutorial. Might attempt it when I set my train set up on a baseboard.

[@jasonh6543]

Absolutely awsome

[@jackiesweetser8496]

Thanks for the great tips. I am using your products for my 1/12 scale greenhouse and potting shed!

[@MisterBenne]

It Looks realistic. Maybe too realistic! I know frozen ice in real Looks White, transparent, but in a model scenery for better contrast, it should be more blue. In model Scenes anything is allowed but not be too real :D

[@theimperialshipyards]

Can anyone say Battle of Hoth Diorama! This shared some great tips and techniques. Thank you. It is now sporting on the front page of Imperial Shipyards!

[@alexanderquiroz2003]

Oh Dios mío es espectacular ! !!!!

[@FiveElms]

This has inspired me to recreate a winter scene on my new 00 model railway, thanks.

[@jeffreyhemphill3831]

I completely thought this was a real person taking a whole nap in the middle of driving, and not giving a heck about tearing up his own truck

[@ModelSceneryExpert]

Sorry, we have no way of knowing what the retail cost of the products would be in Columbia. You can check out the full Manufacturer's Suggested Retail Price in U.S. dollars on our website. If you ordered it from us, I think the shipping costs would make it VERY expensive, but you can check that out too on the website. Just put the products in the shopping cart and choose Columbia in the shipping box, and it will calculate the costs. Hope this helps!

[@mgtowchampion7961]

Thanks mate, creating a Christmas model town for this years christmas decorations.

[@albertofranchi6408]

Super realistic

[@nickanderson9553]

Great work.

[@scottanthony375]

Thanks for this! 😊

[@lairdkeffer]

Love this stuff I'm working on a battle of the Bulge right now and this is just the scenery type I need

[@lazerman66]

Got to see your new products at the Orlando National Train show, Love the new stuff.

[@rexman971]

This is really helpful. thanks again Mr. Matt.

[@Deltabravo604]

Nice work, thanks for the info and the great products.

[@davidshaw7105]

Thanks 🙏 brilliant it really helps us.a lot with your videos thanks

[@xanadujohn79]

Where is the mighty brush??? Looks excellent....

[@daschyt2225]

Great ideas - Thank you! Very well presented also

[@leonardonascimento8684]

very good tour works

[@ModelSceneryExpert]

+Leonardo Nascimento Thanks! Glad you enjoyed it!

[@adminsroserobertson]

wonderful video thank you so much

[@SwedishMonkeythief]

I make models and I have that sweatshirt. WIN!

[@Arc8972]

FLEX BASE! Your new best friend!

[@kimberlykendall]

I love this! Very helpful

[@alainaarrhodge5900]

Do you ever add plants (shrubs) and grass prior to or at the same time you lay down the flex paste?

[@ModelSceneryExpert]

Hello! Thank you for your interest in our products. We recommend applying all landscape before Flex Paste™.

[@corneater23]

Does the water effects cure harder? Because they look kind of like jelly when you work with them.

[@WAVP371]

That looks great bro'!!! Thanks for sharing...

[@eocoleman1]

Great how to video!

[@JakeMcaulay]

wow that's beautiful

[@zeong0987]

Wow... It's real!!

[@kennethpaton]

Wow! fantastic.

[@ThomastheCameraHog]

No, I mean it possible to put the snow on without glueing it down by just sprinkling it all over the layout? Sort of like a non-pernament winter on your layout.

[@siennagemar321]

Wonderful!! Thank you

[@rayna-2172]

U r awsm sir!!! Evrythin is so defined nd perfect!!! Gud Luck fr future works!!!

[@hhhunt777]

So cool. Would like to just buy yours! :D

[@MichelleBrandau-hp6sv]

Do you recall where you got the house used on this video?

[@ModelSceneryExpert]

The house in this video was made with our Humble House Building Kit. It happens to be a bit modified and repainted.

[@MichelleBrandau-hp6sv]

Thanks so much! I love this diorama and watched this video several times. @@ModelSceneryExpert

[@colnagocowboy]

how would you recomend modeling dark mussy snow were people have been walking?

[@ModelSceneryExpert]

Hi, William! Apply Flex Paste to any areas where you want dark, mussy snow to show where people have been walking. Then, apply Soft Flake Snow over the Flex Paste. While the Flex Paste is still soft, make indentations with a tool into the Soft Flake Snow and down into the Flex Paste to make footprints or any other shapes you might want.

[@ThomastheCameraHog]

Can the soft flake snow be used for the sprinkling snow over layout method?

[@sharpguy46]

Do you plastercloth your trees and fences etc in after the subterrain hardens? I guess you could use lightweight hydrocal as well.

[@ModelSceneryExpert]

Hi Robert, We recommend that you add your trees and other accents after the terrain is created. You can simply poke a small hole in the desired area with a hobby knife or punch, add a small amount of either Scenic Glue S190 or Hob-E-Tac, S195 over the hole and insert the base of the tree or fence. If needed, you can hold the object until it starts to set up. The adhesives will dry clear, add landscaping and you are set. Hope this is helpful!

[@sharpguy46]

Okay thanks

[@k41361]

how about showing how to use this technique on track and roadways? I'm building a layout in which I'm gonna use this technique but I need to know how to do tracks and roads.

[@ModelSceneryExpert]

+k41361 For roads, prepare a road as usual, then sprinkle on Soft Flake Snow (SN140) and mist with Scenic Cement (S191) to adhere. For snow banks along the edge of the road, use Flex Paste (C1205) as demonstrated in the video. Sprinkle on Soft Flake Snow while wet. You can also brush on a small amount of Realistic Water (C1211) to model icy patches. For tracks, sprinkle Soft Flake Snow onto Ballast. Brush Snow from top of rails with a dry paintbrush. Mist Scenic Cement onto the Snow to seal it in place. Clean Scenic Cement from rails before use or conductivity will be inhibited. Hope this helps!

[@MichaelDavidCilantro]

Im curious on snow effects. Can I use plaster to create snow, then shave some of the plaster down and use the shavings to coat the top layer then use your products to add in extra effects. I also am trying to figure out creative ways to make ice other then just these technique's. I want to have a lake partially covered in Ice but have it cracking off in area's where there are boats and jet skiers. Has anyone done a lighter sky blue lake with LED ice. I want my lake to light up to give it that glowing fantasy look. Great video. Helped me a lot. Spent all day yesterday painting on layer after layer of plaster, as Im testing out various ways to make a snowy parking lot and road way. Is flex paste softer then Plaster when dried?

[@ModelSceneryExpert]

+Michael David Cilantro It sounds like you have some really great modeling ideas and some interesting questions! Regarding your question about using plaster for snow, we would not recommend it. The reason is because it may look white and fluffy when applied but when Scenic Cement or glue is used to secure it down it will turn a more grey color and the texture will probably change from fluffy to paste-like. To answer your question about Flex Paste, it is as it’s name implies, flexible. When dry, Flex Paste will have a sandable surface but maintain some flexibility, unlike plaster. So far we haven’t tried putting LEDs under water and ice. Maybe some of the other modelers that viewed this video will have some advice for you on modeling that glowing fantasy look that you are after. If you find some techniques that work for you we would love to hear about it and see photos of your modeling!

[@MichaelDavidCilantro]

***** Hey thats some good points you have said, yeah I found led’s are good for somethings other things not at all. Still testing and playing around. did start my layout but ran into real life issues wich put my layout on hold. The community space I have was taken over by a corporate company so I have to find a new place for my community racing room and layouts.

[@2snowgirl520]

Where did you learn how to do this? Just beautiful.

[@redgreen09]

looks graet so good its lookthat i slip on the ice and hirt my self got give a try do some 4ok winter tarin

[@cyrusfett]

Flex paste looks like regular white paint?

[@ginatroyer5511]

I would like to combine this with the waterfall video shown by Woodland Scenics. This would be used for my Christmas Village. Would you have any tips for me? Thanks!

[@MXClover]

I have a question again! Snow is nice but I am wondering if it would be possible to scale model rain? Just having a sheet of glass with water droplets would work but I was wondering if something like a very fine misting machine could work? I am not sure how badly slight moisture will effect track however.

[@ModelSceneryExpert]

You are right to be concerned, and we do not recommend the misting machine technique. Tops of rails need to clean of debris, and moisture on the track would inhibit conduction inhibiting train operation. . A good technique is to dip the bristles of a stiff-bristled toothbrush into Realistic Water (C1211). Then, run your thumb over the bristles to spatter the Realistic Water onto your surface. Hope this helps, and Happy Modeling!

[@MichaelDavidCilantro]

+Woodland Scenics Whoa thats an awesome Idea. I wanted glow in the dark rain droplets in area's where there are Biohazards spills. I think neon glow in the dark slime effect added with this awesome idea of flicking droplets that glow n the dark onto things will work out great. Im concerned with one thing though. I wanted in certain area's to have glowing track but sounds like that would derail the train or cut the power off if rails were lightly misted in glow in the dark paint. Great feedback though.

[@jmarksbery]

Fantastic

[@manning8]

How do you keep the snow from getting dirty? Or if it does get dirty, how do you safely clean it?

[@ModelSceneryExpert]

Simple maintenance will keep Soft Flake Snow looking white. Before applying Soft Flake Snow, seal landscape with a coat of Scenic Cement and let dry thoroughly. When dry, sprinkle on Soft Flake Snow and mist lightly with Scenic Cement to seal in place. Apply a light coat of Snow approximately once per year to keep it looking fresh. Seal in place with light coat of Scenic Cement. When Scenic Cement is misted on lightly as instructed, Soft Flake Snow will remain fluffy. Should discoloration happen for any reason, mix 1 tsp Flex Paste with 2 fl oz water in a spray bottle. Shake the bottle very well to mix the content thoroughly. Don’t mix the dilution any thicker than recommended or it will not spray well. Mist a few light coats onto the dingy Soft Flake Snow, letting each coat dry thoroughly. This should brighten the Snow up nicely.

[@ffarquharstudios3957]

I have a question. . .is there a way to remove the Snow so your layout can go back to normal just incase you dont want it to look like Winter all the time ?

[@ModelSceneryExpert]

This is not something that we would recommend, nor something we've tested. It could be possible to dust snow over your diorama without any additional product. Then, turn your diorama over to dump the snow off when you want. However, there will be crevices and parts of your diorama where the snow sticks. You'd really have to vacuum and work to remove everything.

[@ffarquharstudios3957]

@@ModelSceneryExpert yes i was thinking about a vacuum but i just wanted to make sure

[@kristophergoad2135]

How was the chimney smoke made?

[@MXClover]

These are amazing. Ive gotten into model trains recently, N Scale Im going with, but all I have is just a small oval of track.

[@honestgbfan5324]

that is exactly where most of us started :) Not sure where you are at after 8 years but nothing wrong with starting there :) I myself had a time where I didn't model as I had to leave my bedroom at home when i went to college etc. but started up again recently and I am completely enjoying all the new products and methods available that have come out since then.

[@mono011043]

Fantastic , really . Please give me the cost of liq uids used for the process, Congratulations . Iam in Colombia

[@corneater23]

Oh What about the E-Z water? When i look on your website and Google it looks like hard glass nothing like rubber. I mean like it breaks into sheets like typical glass.

[@sallyliali7813]

What paint did u paint under the water ?

[@carlossantamariabarrantes2592]

The problem is that the materials are not available in our country,so what do you suggest?

[@ModelSceneryExpert]

+Carlos Santamaría Barrantes To model snow you can use baking soda. If you do a search for "baking soda snow" you will have dozens of recipes come up. You can then determine which one is best for you. As for the ice effects, check with your local craft shop for a clear or white acrylic gel. This will work similarly to give you the desired effect.

[@DominicFawver]

I will have to try these techniques, I have been looking for a good solution for snow.

[@daniel-kq1oe]

How did Matt create the smoke that was coming out from the chimney? I was wondering because my friends and I are going to make a similar diorama. Also, do you have any tips on what rock faces to use on your layout?

[@ModelSceneryExpert]

To create the effect of chimney smoke, you will need some white polyfiber. You can find this at your local craft store. Then, you can spray paint the polyfiber gray or black to replicate the appearance of smoke. As for rock faces, we have many options that all look great. Deciding what kind of rock looks best on your layout depends on what you like. For more information about rocks for your layout, you can watch our videos at the links below. Ready Rocks™: kzbin.info/www/bejne/a6bRaoaBqbGAaa8 Making your own rocks: kzbin.info/www/bejne/aGnWZ4ObpsSgaas Carving rocks: kzbin.info/www/bejne/fZK3ZqGKjr53npo Coloring rocks: kzbin.info/www/bejne/aYTJgWeIpch3j9k More realistic rock techniques: kzbin.info/www/bejne/jpSVoqiVfa2Sn7M

[@Obelix2412]

Wonderfull!!!

[@TheLuvy123]

Wooooaaaaao me encanta

[@kyffaa]

This is so great, I learn alot. Thanks for sharing!!

[@GIJOE4157]

AWESOME!

[@colnagocowboy]

Would the new deep pour water alter how you'd model ice/water

[@ModelSceneryExpert]

Hi, William! Creating ice effects with Deep Pour is different than with Realistic Water. You do not want to use any pigments to color the water. You will lightly sprinkle Soft Flake Snow onto freshly poured Deep Pour Water (immediately after pouring is best). Allow Soft Flake Snow to sink into the Deep Pour then sprinkle on another layer. Continue this process until the desired effect is achieved.

[@colnagocowboy]

Thank you looking forward to an Appalachian winter

[@AMCARDUDE]

Amazing.

[@sharpguy46]

Do you have a video of how you built up your terrain?

[@ModelSceneryExpert]

Robert Abraham Hello Robert! Yes we have several. Here is the link to our website video page with videos from starting from the very basic beginning to modeling rock formations and dramatic terrain. Hope this is what you a looking for. woodlandscenics.woodlandscenics.com/show/video/c/terrainformation Happy Modeling!

[@MichaelDavidCilantro]

+Woodland Scenics Oh thankful I saw this comment

[@hpg19461]

HOW DID YOU GET THE SMOKE COMING FROM THE CABIN CHIMNEY?

[@adamatkinson2728]

But alas, no answers were given . . .

[@YesterdaysVillage]

What is the ration of water to Scenic Cement when using it as a spray solution for applying the Soft Snow? Also can the soft snow be applied to Bachmann E-Z track with the scenic cement? Thanks so much for this very helpful video!

[@ModelSceneryExpert]

We are sorry for the confusion, but Matt mistakenly mentions to dilute the Scenic Cement. This is not correct. It is ready to use full-strength, right out of the bottle. Shake well before applying. Yes, you can use this technique with Bachmann E-Z track, but remember to avoid the rails. The best method for applying Soft Flake Snow to the track area is to brush Flex Paste onto the desired track area, sprinkle with Snow while wet, working in small sections so the Flex Paste does not dry. You can also apply Snow directly to the area and spray with Scenic Cement as Matt demonstrates. In either application, make sure not to get Flex Paste or Soft Flake Snow on the rails, and make sure to clean your rails thoroughly prior to running your train to remove any adhesive that may get on them during this process. Hope this helps.

[@YesterdaysVillage]

***** Thanks very much!

[@conrailbostonline6048]

Can't wait to do this, I'm almost there! Flex paste looks perfect topped with the ws snow. I plan on modeling a low light situation where the snow has shades of blue. I read of a technique of adding a drop or two of cerelean blue acrylic paint to make the effect I'm desiring. Would you recommend that?

[@ModelSceneryExpert]

Hello! Yes, acrylic paint can be mixed with Flex Paste or Scenic Cement. If any of your tinted snow is going to be touching a water feature, make sure that you use 100% acrylic paint. Otherwise, the water product may have a reaction to the paint not being 100% acrylic. Happy modeling!

[@conrailbostonline6048]

ok great!! Would you recomend and amount to add to the bottle? should I start with just a drop at first?

[@ModelSceneryExpert]

Yes, we would recommend you add small mixtures until you have reached the color you are looking for. Happy modeling!

[@conrailbostonline6048]

Excellent! I went out today to my L HS, and bought some flex paste, and The snow flakes in the shaker! Thank you so much for taking the time to help me.

[@towcat]

Is there a video like this for adding snow buildup on rolling stock? Going an extra layer with my plans and I'm not sure how to go about that other than usin a foam brush to dab it on the car where it would stick, however, there's areas where it would build up (around the ends and over the couplers) and not sure what to use there without messing up how the car runs

[@ModelSceneryExpert]

We do not have a video over that specifically. Make sure none of the product comes in contact with moving parts or anything the train needs in order to connect to the track and be able to function.

[@towcat]

Okay, thank you. Could I use the products used in this video as long as I'm careful with them? (And don't mess up rolling surfaces and moving parts) Are they heavy enough to upset the balance of a railcar?

[@ModelSceneryExpert]

We are unable to give a definitive answer of the effect this will have on your rail car. The effects will vary depending on the locomotive you are using as well as how much is applied.

[@towcat]

Okay, makes sense. Thanks for the help!

[@sharpguy46]

Did you use plaster cloth over newspaper for the subterrain?

[@ModelSceneryExpert]

Yes, we used our Foam Sheets for the base of the snowy diorama, added newspaper wads to create the terrain and covered everything with Plaster Cloth before landscaping.

[@MichaelDavidCilantro]

+Woodland Scenics I like plaster cloth but Im at the point right now where Im trying to avoid it , im scared of it because I feel like in my layout hotwheel or matchbox cars that come barreling off my 1:64 scale race track incorporated into my layout might just smash through the plaster cloth. Is the plaster cloth pretty sturdy when mixed with newspaper wad techniques? Maybe layering it like 5 times may help but wouldn't that be a bit bulky looking?

[@ModelSceneryExpert]

Michael David Cilantro Obviously the more times you layer it the thicker and bulkier it will be. The plaster cloth is rather sturdy and durable. I recommend adding only 2, maybe 3 layers of plaster cloth if you want to go that route. It will keep it from bulking up too much, but protect it enough so as not to destroy your layout. Hope this helps!

[@MichaelDavidCilantro]

***** Thanks yeah I been doing very thin coats of Plaster followed by spray foam ect. Its working out great.

[@screwthenet]

Killer!

[@tylerwilliamson7112]

what kind of glue do you use when you put a bead around the water feature

[@ModelSceneryExpert]

Matt outlines the water feature with a bead of our Scenic Glue, Item S190. We recommend our Scenic Glue, because it is tested for this purpose. Other white glues and caulk have additives that will react adversely with the Realistic Water, so if you use something else, you will want to test it first. Also, wait until this glue is COMPLETELY DRY AND CLEAR prior to pouring our Realistic Water product, Item C1211. Hope this helps and Happy Modeling!

[@FantasyPartyStore]

What was the color used for the water undercoat pigment?

[@hibye-gw5mr]

Where can we buy Woodland scenics products??They might come in handy some time!:)

[@ModelSceneryExpert]

Most hobby shops carrying Woodland Scenics products. Check out our Store Locator to find a shop near you: woodlandscenics.woodlandscenics.com/show/information/DealerSearch?ws or you can buy products directly from our website: woodlandscenics.com

[@j_holtslander]

How do you seal the top layer of snow so it stays fixed?

[@ModelSceneryExpert]

Spray Scenic Cement on each layer you pour to lock it into the model.

[@curtisrobinson7355]

could not find woodland scenic pigment

[@bubbles2868]

I wish instructional videos would not play the background music throughout the duration. It makes it hard for us to hear.

[@KerleyExpress]

How do you make the fake smoke coming out of the cabin?

[@ModelSceneryExpert]

Hello, Dwight! We used a white Poly Fiber to create the smoke effect.

[@toodles241]

what's the base made out of...is it just foam?

[@ModelSceneryExpert]

toodles241 We used our Foam Sheets for the base of the snowy diorama, added newspaper wads to create the terrain and covered everything with Plaster Cloth before landscaping. Hope this is helpful!

[@Cooludeful]

What's the base made of?

[@vivi_t3ch]

liking the info, but can we not have such loud music compared to the voiceover? makes it hard to hear him

[@naancraft2052]

Do you do shipping overseas?

[@ModelSceneryExpert]

Yes, we do!

[@nilifaivre2540]

👍🤩

[@emadabualshohod14]

i love everything from wood land scenics but it's so painful i can't buy anything from you guys cuz i am from egypt

[@ModelSceneryExpert]

Hello emad abu al shohod! I don't know if this will help, but there is a distributor/retail store in Dubai that sells online also? If so, you can contact Creative Minds. Here is the contact information and their website: 043237180 Al Barsha 2, Umm Suqeim Road, Dubai. Thanks for your interest!

[@bbrockRailFan]

Sorry I am not a fan of the Realistic Water it never really dries it just stays super tacky.

[@shaziaparveen2038]

Plz suggest some other thing for water or what I use for water plzplz plz

[@ModelSceneryExpert]

shazia parveen Hello Shazia. I am sorry, but we cannot recommend other products. We do not test other products, only our own, so we can't give an opinion as to how it would turn out. BUT...there are loads of how-to videos on KZbin about modeling water with lots of things. We suggest you do a search for 'modeling water' or something similar. Good luck and Happy Modeling!

[@shaziaparveen2038]

Ok thank u

[@jezjezman9487]

+shazia parveen put "Water Clear Casting Resin + Catalyst - 1kg" into ebay

[@MichaelDavidCilantro]

+Woodland Scenics Woodland scenics water products so far seem to be the best out there so if budget is a reason you need to look else where for water scene idea's I suggest you give it a second shot. Ive heard horror stories about other brands and products related to water effects that over time cracked or turned amber colored. Just saying maybe the money is fit for the excellent customer service and products :D

[@oldjohnboy1]

what scale is this?

[@ModelSceneryExpert]

This was modeled in HO scale.

[@PewdiepiesChair]

a b c d e f g h i j k l m n o p q r s t u v x y z Notice anything? The w is out for woodland scenics is amazing.