Wow, in 5 years, the cost of spray paint has more than doubled. I should have started painting my nerf arsenal years ago.
@seantennis51216 жыл бұрын
Can you do a video on shell integrations
@builderbb87676 жыл бұрын
Wow I've never heard stock blaster paint needs to be sanded off thank you for saving me frustration, best Tip this week
@CjNerf6 жыл бұрын
Great video Xavier - Couple things i would just like to add Duplicolor Vinyl Dye also comes in Desert Sand ! --- another cool thing you can use to sand your blasters with is a scotch guard pad it sands it very lightly ! Never start a spray on the blaster start off sweep and dont stop until you are off the blaster IMO
@joshua54836 жыл бұрын
0:03 is when I spilled my MUG root beer. When I finished cleaning up the mess i made, I went to grab another since the majority of it was spilled. To my surprise, there was none left. Now I’m watching the rest with just water :(
@menamejeff10475 жыл бұрын
Sad
@CrusaderRAHHHH5 жыл бұрын
Nice flex
@user-ve1cc6qn6t4 жыл бұрын
F
@pixely_ninja2294 жыл бұрын
F
@wpers4 жыл бұрын
F
@benrussell9176 жыл бұрын
Captain X - great vid, exactly what a paint noob needs. I've been caught out by not sanding Nerf paint off before and nobody could explain why the magical vinyl dye wasn't working as advertised!
@samuelboehlke17136 жыл бұрын
Perfect timing! I'm painting up a Buzzbee Snipe currently, and these tips will be useful.
@Xarschia6 жыл бұрын
Later this month, I'll be experimenting with Rit DyeMore. It claims to dye Lego pieces which is made from the same type of plastic. I'm hoping that it will make moving parts so they won't wear off. I'll keep you posted on my findings.
@CaptainXavier6 жыл бұрын
+Xarschia sweet! Let me know if it works!
@Xarschia6 жыл бұрын
Captain Xavier Unfortunately, it seems to be a total failure, unless you want a slightly-dirty plastic look. Addendum: using a double-strength dye bath and leaving it sit for a week yields a deep, almost bronze color (on orange, that is). I'll E-mail the results to you.
@africancouscous3 жыл бұрын
@@Xarschia thanks for the tip I nearly didn’t see that you had another comment i tried it and it’s perfect!
@tingil84394 жыл бұрын
If I may, a little tip on how to avoid the seam between the two shell halfs not being painted (and other areas that may be hard to get): Paint your shell halfs from the inside first. That way the seams will be painted and also other areas that may be visible from the outside, e.g. the magazine well.
@ClarenceSampang4 жыл бұрын
You can also use baby oil for sticker residue; it comrs clean off.
@JohnJames.3 жыл бұрын
Works on temporary tattoos like a charm
@mattmccoy10146 жыл бұрын
I’ve been using rust-oleum for most of my paint jobs. I’ve found it beneficial to use one of their paint and primers for the base coat, as the primer part will help it adhere to the plastic. Also, I’ve found that leaving flat or matte finish paints unprotected will cause them to wear off (especially on handles) I have started using one of their specialty lacquers as a clear coat and have had some trial and error. Beware, if you do weathering with diluted black acrylic, then wait at least 12 hours before applying the clear coat. I had an entire half of a stryfe shell orange peel on me because I was impatient and put my clear coat on too early. Other than that it works great and protects the paint very well. I hear so many people saying to use vinyl dye but I’m doing all personal builds at this point and I’ve had no issues with chipping or paint not adhering so far. I can’t justify spending $20 on a can of spray paint.
@mbmstudios97684 жыл бұрын
Acetone, Olive oil, or DW40 work well for removing sticker residue. Acetone is probably the cheapest at 99 cents, then olive oil, then dw40. If one doesn’t work, the other one will.
@partyfrogmarkle27436 жыл бұрын
2 pieces of advise for the group. 1. If you live in a climate with a winter with temperatures averaging below 50 degrees F, Prep and Base paint several blasters in the fall so you can spend the winter doing accent work. 2. Take a lot of pictures during the project. When it is done you will want to be able to show the transformation from Stock to Customized.
@Spartan4124 жыл бұрын
Planning on turning my Nerf Fortnite SP-L into an elite sidearm with the iconic blue, white, and orange colours. So this guide is just what I needed, considering it is my first paint job and modification of a nerf gun as well!
@McGowanForge5 жыл бұрын
My colors are black and white, cause it looks futuristic and as you would say... fantastic
@quindariousgooch60596 жыл бұрын
Very helpful, there's a lot of controversy in the community about what to use. Thanks for being clear and making a great video!
@audiemuniz64453 жыл бұрын
All paint that is shinning,need to send it off,that way paint crab better.i used autoair.is water base and can applied clear coat.love it!! Try it you will love it!
@RamROD13376 жыл бұрын
$3 FOR SPRAY PAINT!!!!!! Here in Ireland I pay about €10 a can!!!
@CaptainXavier6 жыл бұрын
Yes but you have universal health care so it balances out. I can get cheap spray paint but my back and knees are slowly getting worse and eventually I will not be able to walk because I will never be able to afford the surgery necessary to fix them. You win some you lose some...
@Freashskywalker6 жыл бұрын
This reminds me of correcting like all my nerf paintjobs... sad thing is that i can't do thise in winter and also not inside because of health reasons... gotta wait at least 3 months now...
@EmoSquirrel7816 жыл бұрын
Thank you. I just did my first paintjob and it ended up mediocre, even after a full sand down and repaint once I bungled the first time.
@thomjames666 жыл бұрын
I used the gray version when painting for brighter color and the matte clear coat makes even the ugly green Rayvens look super cool and have the pics to proven it, just sayin! The black die can give a custom darker color and that was a fun thing to find out. Love the nerf tips and learning a lot my thanks Captain Xavier
@whatstdiggn6 жыл бұрын
You can use a gray vynil dye as a basecoat and then coat the whole blaster in orange and youre at spray paint plus a can of gray instead of all that bread for the orange dye. Its almost as much but still less
@thebronyotaku57056 жыл бұрын
After the paint videos r done could u show what different epoxy resin to use for integrations?
@jacob63866 жыл бұрын
Hey captain, I really like the Furyfire for some reason, and it would be absolutely fantastic if you made one modular or just did something with it. Pump action revolvers really interest me for some reason.
@TheREALwymario6 жыл бұрын
This is much more thorough than most guides I've seen, thanks! You should do one on painting details if you do that regularly, because I had a hard time with details on my first paintjob. Unfortunately here in Washington you can't buy spray paint in stores until you're 18. Almost there...
@kyloluma12124 жыл бұрын
Bruh, just get somebody else to buy it for you
@sir_goofs94566 жыл бұрын
CAPTAIN IS WORKING ON A RAYVEN TYE GODS HAVE ANSWERED YYYEEESSS
@clone7344 жыл бұрын
Sadly when i clicked on this video i got an elite 2.0 ad 😂
@alexelliot24435 жыл бұрын
For most of my goo removals from stickers I use rubbing alcohol and a rag or napkin or sometimes steel wool
@CaptainShotgun0072 ай бұрын
@CaptainXavier So with Vinal Dye do I let it sit between coats or do I only have to do one thick coat?
@GuitarSamurai176 жыл бұрын
Next mod tips needs to be how to choose a design/paintjob/color scheme
@CaptainXavier6 жыл бұрын
+Exodarion that I cannot help you with. That is entirely a matter of personal preference. I can't teach that.
@RIN-ud9kd4 жыл бұрын
For my paint jobs I use a paint pen and add color to certain areas. I don't use spray paint because it scares me but I also just do little bits of the blaster or to repair a paint job.
@captainnapalm82076 жыл бұрын
Captain Xavier, have you considered doing videos on simple tactics, such as stacking up, and clearing rooms? I think they would be well received, and just really cool.
@dreadlearner8026 жыл бұрын
I second this. Playing in an urban area really gives that real-steel feel (lol), and as he is in private security he definitely knows what he's talking about.
@captainnapalm82076 жыл бұрын
FreezeDriedCoffee agreed
@CaptainXavier6 жыл бұрын
+Captain Napalm if only my army was not hundreds of miles away...I will have to see if the local Nerfers are capable of being taught...
@captainnapalm82076 жыл бұрын
Captain Xavier, your AWESOME!
@CaptainXavier6 жыл бұрын
My Awesome? What about my awesome? My awesome is very nice. I buy it in bulk. :P
@quaintpanic3 жыл бұрын
Rubbing alcohol should work well to remove adhesive. Just be sure you're not using acetone!! That stuff melts plastic.
@hetspeelkwartiertjeslaatte26243 жыл бұрын
I recommend artist grade paint, for the simple reason that there's every color you can think of.
@brandonkeller5912 Жыл бұрын
Question about number of coats: do you do multiple coats of primer/each color to get it fully covered before moving on to the next? Or, do you just move on with the little bits that are uncovered like you discused to avoid pooling?
@the.alexkim3 жыл бұрын
Could you show a visual comparison, using white, grey, and black primer?
@grabbity6 жыл бұрын
I've resigned myself to not painting the orange parts of my blasters very often, stuff hates sticking to it smoothly for some reason, I am probably half adding the sanding job on them tbh. I also love the duplicolor perfect match I did a crossbolt in the dodge viper blue with black accents and a gloss clear coat and it turned out amazing. If they all ended up that nice I would be happy lol.
@3Xnc6 жыл бұрын
I prep my blasters with scotch brite pads and water that helps dull the shine on the plastic before priming. I did a video on wet-sanding my nerf logos on my other channel because friction makes things take longer because of heat so i do all mine like that now :)
@CaptainXavier6 жыл бұрын
Good to know! Thanks!
@3Xnc6 жыл бұрын
Its Under "Avarice Cosplay" on KZbin
@johnconnorstopskynet4 жыл бұрын
When you say sand the paint, you mean literally all of it? Or just scuff it real good cause I have a rapidstrike and I been sanding it for 3 hours and theres no way you can get every morsel off paint off without say like a bead blaster.
@CaptainXavier4 жыл бұрын
Just scuff it. It needs to have a rough surface for the paint to adhere well.
@toasterstroodle35274 жыл бұрын
note to self and to veiwers: while the nerf firestrike is fun and easy to mod, it is a real pain to sand down. i found a craft/hobby knife or and xacto knife is good to scrape off the little painted in details
@magicmanz16016 жыл бұрын
How do you learn to mod, are there classes or something 😂
@CaptainXavier6 жыл бұрын
No...but there are lots of videos on KZbin... like...you know...the dozens on my channel...
@magicmanz16016 жыл бұрын
Sorry to be rude thanks
@CaptainXavier6 жыл бұрын
I didn't read it as rude...just kinda clueless. ;)
@kylelowe1203 жыл бұрын
So I'm looking for some particular spray cans and I'm having a bit of trouble finding one mostly, a crystalline orange colour.
@connormoroney13053 жыл бұрын
watching this before i do my first painting, im eventually going to paint up an aeon pro and nexus pro in megaman battle network red blue and yellow. my plan is start on a mag, move up to a ubiquitous maverik that i bought on a junk run and then finally go for broke with my aeon
@Commander_Skullblade6 жыл бұрын
I was just about to ask about this.
@sgtmcguffin49306 жыл бұрын
Thank you for everything that you do to help and entertain us
@benjaminshields94214 жыл бұрын
I came to see advice on clears and protecting paint jobs. But I heard you say not to use black primer, and I disagree very much. While white primers make colors pop more, a lot of colors come through better or have a more realistic shade with a black primer.
@CaptainXavier4 жыл бұрын
I have since changed to pretty much only using black vinyl dye as my primer so...we live and learn. :P
@tanksniper3806 жыл бұрын
I tend to use plasti kote for mine with a clear kote finish
@beerenmusli82206 жыл бұрын
I will defitly use that knowledge.
@sauronsauronsauronsauron88914 жыл бұрын
Hey Cap! Great informative video! Any tips and recommendations regarding painting Springer's like the retaliator and how to prevent that the 'plastic-on-plastic' region gets scuffed through the slide-/pump-action. Any procedure to protect the paint or have a paint type which is not affected by the sliding? Maybe you can demo this type of paint jobs and the slide action not destroying paint in a video? Keep up the great work! Cheers from Germany.
@CaptainXavier4 жыл бұрын
The trick is going to be really light coats of paint so there is not much build up (vinyl dye is great for this) and a good thin clear coat. The clear coat will protect the paint. You also might try sanding the under side of the slide to make a little more room to make up for the thickness of the layers of paint. Not much, just enough.
@sauronsauronsauronsauron88914 жыл бұрын
@@CaptainXavier thx for the reply - much appreciated! Excellent recommendation which I will certainly try out. You good Sir are a true gentleman! Nerf on!
@unknownyoutuber4665 жыл бұрын
Hey cap I watched your spray painting totorial. I'm just wondering what are the best clear coats out there? What is a primer and what is the difference between a primer paint and a normal paint? Also, last question, are the duplicolour paints that match the car paint on cars, are they considered vinyl dye?
@Burasta4 жыл бұрын
Do you think Vinyl dye would work on tactical gear? I want a tactical vest in non-military colours.
@CaptainXavier4 жыл бұрын
I plan to try
@Burasta4 жыл бұрын
@@CaptainXavier I tried Tamiya Spray paints on black tactical gear and was unimpressed. I tried Rit Dye and only managed to turn tan gear to olive drab with blue dye. I need to see what vinyl dye I can get in Japan and do a test.
@peterpierce99183 жыл бұрын
Can you explain more on the materials for shell intergrations
@andrewgaughen93104 жыл бұрын
Nicely done. Now I need to find a spray to match/approximate that of the Nerf Mega Red. Any suggestions?
@CaptainXavier4 жыл бұрын
Have you tried...red?
@andrewgaughen93104 жыл бұрын
@@CaptainXavier THE DEUCE YOU SAY!
@zeroblade77086 жыл бұрын
I generally use some deodorant spray to get the sticker residue off
@Calthecool4 жыл бұрын
Is the dye really that good that you would pay $19 for an orange can instead of $4 for just normal paint?
@CaptainXavier4 жыл бұрын
Yes
@Calthecool4 жыл бұрын
Captain Xavier Wow I need to get me some of that.
@gamerguy4256 жыл бұрын
painting generally seems 10,000x more effort than it's worth to do it right, and then no matter how careful you are, something INEVITABLY screws up and inevitably scratches off. there are frequently areas that are really difficult to paint on nerf guns, it takes a lot of artistic skill to put something together that is generally aesthetically pleasing; in other words it takes a lot of time and commitment to not end up with something worse than what you started with.
@CaptainXavier6 жыл бұрын
+William thus, I paint it black, hand paint some details, let nature tale its course. :P
@adamalvarez45286 жыл бұрын
Once you use the vinyl dye , do I need to primer the area that I want to use krylon fussion color , or can the spray paint go on the vinyl dye directly?
@CaptainXavier6 жыл бұрын
It can bit you need to let it sit at least 12 hours to cure before painting
@jorgeverdin66896 жыл бұрын
Why don’t you make a little mini booth and hang the parts for easier spraying to get all the edges
@CaptainXavier6 жыл бұрын
+Jverdin33 space limits
@SchizoRetard4 жыл бұрын
1:52 would gloss make it match the plastic shine of a nerf blaster, I am thinking of painting the grey handle and white section of the barrel black on my accutrooper and want the shine to match the upainted sections of the blaster
@digitalalchamy87645 жыл бұрын
Plz do shell intagration Also will citadel spray paints function? (Warhammer paint)
@christinebeech47236 жыл бұрын
Love the videos
@clarissagallo27644 жыл бұрын
I know no one will read this comment but is the paint even comfortable when you hold the blaster
@CaptainXavier4 жыл бұрын
What? Comfortable? You can't feel it. It is paint...
@clarissagallo27644 жыл бұрын
Thanks I was just worried that it would make the blaster uncomfortable to hold
@joeofdoom6 жыл бұрын
I'm sure somebody will complain about the vinyl dye. I've never really understood why it says coating on the dupli-colour stuff but here in the UK you can get tons of different colour vinyl dyes pretty easily.
@jackphillips66556 жыл бұрын
joeofdoom where about I'm in the uk
@joeofdoom6 жыл бұрын
Theres a lovely website by the name of www.vinyldye.co.uk/
@jackphillips66556 жыл бұрын
joeofdoom thanks a lot, I'll probably be using that sometime :)
@SquishiestSquidy5 жыл бұрын
I know this is a loved method, but how could I remove the paint without risking loosing the logos and keeping the plastic perfectly fine?
@CaptainXavier5 жыл бұрын
Paint remover?
@SquishiestSquidy5 жыл бұрын
@@CaptainXavier I was considering that but I found out that certain paint removers lie about being plastic safe. I'm not sure where to find a reliable one
@blades99375 жыл бұрын
What about model paint?? 🤔
@CaptainXavier5 жыл бұрын
I use it for detailing.
@blades99375 жыл бұрын
Captain Xavier that makes sense.
@samrodwell43616 жыл бұрын
I don’t know if spray is more highly revered in England but I looked up the cost of that exact vinyl paint and it was £50
@CaptainXavier6 жыл бұрын
O.o
@jaydenedwards49966 жыл бұрын
And cap u are lucky!! The rustolum costs 9$ and vinyl dye close to 15
@jaydenedwards49966 жыл бұрын
In canada
@CaptainRedbeard893 жыл бұрын
Can I use this paint for rubber like plastic as well
@legofreak60715 жыл бұрын
Can you do a video on your top ten favrouit costom blasters you made
@ewgeldfocker6 жыл бұрын
If you don't have goo gone, you can use peanut butter and sunlight!
@CaptainXavier6 жыл бұрын
...weird...but good to know
@MajTom1015 жыл бұрын
How does vinyl dye play with colored plastics? Can you dye a red piece green?
@CaptainXavier5 жыл бұрын
Probably?
@MajTom1015 жыл бұрын
@@CaptainXavier Wasn't really expecting a response! What I mean is how much does the original color change the end result?
@CaptainXavier5 жыл бұрын
None that I have seen.
@MajTom1015 жыл бұрын
@@CaptainXavier Awesome, thanks!
@karthikpeirce88983 жыл бұрын
I found a random spray paint that says that it works on plastic. I am confused if I should get it because it's tough to find Krylon, rustoleum, or vinyl dye in singapore
@CaptainXavier3 жыл бұрын
If it says it works on plastic it will probably work. If you can, test it on some scrap first.
@THISISSPARTA8275 жыл бұрын
9:13, just bust out a pot of Testors enamel paint and go over it without all the sanding?
@MajTom1015 жыл бұрын
Is there any way to protect a Hasbro Paintjob? Say on a Red Strike Recon. Will clearcoat stick to an unsanded blaster?
@CaptainXavier5 жыл бұрын
Yes...but they aren't painted red...the plastic is actually red. Unless you mean the detailing.
@MajTom1015 жыл бұрын
@@CaptainXavier I do mean the detailing. I got one for cheap in order to mod it (tastefully I promise) but the detailing is in way better condition than I was expecting. What protective coat would you suggest if any? Some have suggested Pledge original floor gloss
@laylahingram838 Жыл бұрын
Thank you. So if i use plastic dye spray, i don't need to prime (by my understanding) 🤔😁
@CaptainXavier Жыл бұрын
Correct. The vinyl dye acts as you base coat. But be sure to give it a full day to cure it appears to dry super fast but do not sure it. You rush a paint job, you get a lousy paint job.
@currently_dead6 ай бұрын
@@CaptainXavier would it be ok to use multiple coats of vinyl dye?
@CaptainXavier6 ай бұрын
@@currently_dead sure? Why wouldn't it be?
@currently_dead6 ай бұрын
@@CaptainXavier the way you said it was the base coat, I thought you meant it could only be a base coat. Another question. Does the vinyl dye work on the (sanded down) glossy plastic used for stock attachment points on springers? And if I used flat black dye and gloss clear coat, would it look like gloss black? I know it's a lot of questions but I'm doing my first 2 mods at the same time. Mediator and Stryfe, both of which are getting painted.
@mdzl705 жыл бұрын
Do you need to prime if you're using the duplicolor?
@nickf.37626 жыл бұрын
You get so many vortex blasters on your goodwill trips and I don’t have any of them
@maxmathena44172 жыл бұрын
what can I use for precise painting? I've heard that enamel paint work pretty well. whats the best brand?
@CaptainXavier2 жыл бұрын
I use model paints. I know nothing about the brands. I was given a set about 20 years ago and they still have not run out.
@yavvn47614 жыл бұрын
What if you want to do a white paint job then go in with detail and smaller paints to do battle camo
@CaptainXavier4 жыл бұрын
Then prime in grey first to cover the original color. They a coat of white. Then your detailing.
@phamilyphun13676 жыл бұрын
If I paint a white pre existing stripe black will it show?
@KenkageJack6 жыл бұрын
8:44
@afterburner442 жыл бұрын
If i paint a Demolisher rocket launcher, does it affect performance?
@CaptainXavier2 жыл бұрын
Only if you paint it red, yellow, purple. Red makes it go faster, yellow makes it explode bigger, purple makes it harder to see.
@Alexplainow6 жыл бұрын
Rather messy spot spray but we are can spraying so.....
@nerfeclipsisdraco81016 жыл бұрын
can you do a double recon/retaliator/reconMII similar to walkoms double alphatrooper i tried to nad couldn't get the catch to work
@Twitchtwisted5 жыл бұрын
Question for you cap. When using rustoleum 2x ultra cover paint what paint do you use for hand detailing? I can't seem to find one that coats and sticks well?
@CaptainXavier5 жыл бұрын
I just use cheap model paints I was given years ago. I don't recall the brand.
@PeterKirbyBC5 жыл бұрын
i see that taco bell cup, i now respect you even more knowing you eat taco bell
@fengzuahuezaozhinshanchi61765 жыл бұрын
Hey guys what would happen if I didn't sand down the nerf gun , also is it possible to paint a whole nerf gun with just acrylics?
@toaster29405 жыл бұрын
Sanding helps it stick,so the paint may wear quicker, also it's possible but may take a while
@shadowsa2b6 жыл бұрын
sorry if you mentioned this and i spaced on it, but is there any formulaic difference between paint and primer? and does primer interfere with dye absorption?
@CaptainXavier6 жыл бұрын
No idea, you would need to talk to a chemical engineer.
@SmokeyGalaxy6 жыл бұрын
So what your saying is that I can sand my Nerf gun, lightly spray paint it gun with black Vinyl comeback tape it off were i want some of it to be black like the dragon head im doing to then spray paint it with metallic maroon, add the details like chrome silver and weathering, to then finish it off with a clear coat? Anything im missing?
@CaptainXavier6 жыл бұрын
+SmokeyLongBarrel nope, sounds right.
@SmokeyGalaxy6 жыл бұрын
thanks
@SmokeyGalaxy6 жыл бұрын
Oh and when you talked about clear coat you said that a matte would change the gloss, is there a rust-oleum clear coat that just makes a protective seal?
@jaydenedwards49966 жыл бұрын
And if you are Canadian, canadian tire has duplicolor
@bricktv82726 жыл бұрын
Do one on shell integrations
@solgonzalez19192 жыл бұрын
Lol inflation has aged this video
@villainous696 жыл бұрын
Hi Xavier I hope you do a mos tutorial on the Stryfe
@cr4shmycar1186 жыл бұрын
Pl0x He's already done it. It's under "Monday mod tips - Flywheelers".
@villainous696 жыл бұрын
Nightslash360 thanks pl0x
@randikae136 жыл бұрын
If I’m in a big shop garage do I need a mask? Or will a rag or just regular paint mask work
@CaptainXavier6 жыл бұрын
How much to you care about your lungs? As long as it is well ventilated you should be fine.
@shuswjdndnfnfbfnfvegeheg19303 жыл бұрын
Do you have a video on logo removal?
@CaptainXavier3 жыл бұрын
Other than just lots and lots of sanding?
@Crowe09206 жыл бұрын
Please tell me I am not the only one who sings, "shake your booty," while I shake my spray paint lol
@mahkigervais13896 жыл бұрын
Your not the only one
@abijahgribble3 жыл бұрын
If using the vinyl spray since it dyes. Then would primer still be good to use?
@CaptainXavier3 жыл бұрын
No. I use Vinyl dye AS my primer.
@abijahgribble3 жыл бұрын
@@CaptainXavier so the vinyl does good enough with no primer and all I need to do is sand/prep and spray? Wow almost too easy!
@williamstephenson88113 жыл бұрын
What grit of sandpaper do you recommend?
@CaptainXavier3 жыл бұрын
At least 220. Higher if you want a smoother finish.
@santablanca38304 жыл бұрын
If I’m painting a magazine how do I get the magazine entirely black including the part that goes into the mag well
@CaptainXavier4 жыл бұрын
I would recommend trying. Painting the top part will almost certainly cause it to stick or at the very least the paint will get scratched off. You might try vinyl dye as it is generally a thinner layer
@santablanca38304 жыл бұрын
Captain Xavier thanks captain
@Powerhead2012 жыл бұрын
How long does each layer of paint take to dry?
@CaptainXavier2 жыл бұрын
Depends on weather and location.
@ClaireDuhLune3 жыл бұрын
$3.50 USD for spray paint?!?!? I have to pay $10 CAD per can...