Monster forged wheels for my GT1 LP640 Murcielago. Custom concave billet centers

We check out my monster concave 3SDM custom forged wheels for my Lamborghini GT1 Murcielago project. The rears are insanely concave. Me being the fussy git I am. Will I be happy?
►Complete Lamborghini build playlist: • Driftworks Lamborghini...
►Follow me on IG @PhilMorrisonDW & @driftworks
►Subscribe for more! bit.ly/2k6oBqh
Did you know we have a gigantic online wheel and suspension shop?
►www.driftworks.com/

[@MrRockinRein]

Jay's face when Phil mentions ET -30, priceless!

[@driftworks]

😄

[@Matty.Hill_87]

He thought about it for a second then it sunk in 🤣🤣

[@SteveC200]

You can almost see his brain going 'Wait, what?!'

[@gen1c8rs88]

@@Matty.Hill_87 Yes then it finally sunk in, Jay's face sunk in -30mm 🤗

[@SteveC200]

And again with the 'they might not fit' comment. Jaybrain just stopped dead.

[@kingcal1991]

The chemistry and banter between you's and the way it bounces off each other is a pleasure to watch, the one liners are top drawer. Thanks for the great content!

[@driftworks]

👍 No worries. Cheers

[@Ali4994]

I can't imagine you'd keep a job very well if you didn't get on with the other staff

[@kingcal1991]

Alastair Williams i bet you’re fun at parties 😅

[@1967Stotty]

The fronts just make the rears look even more outrageous!

[@driftworks]

🤘

[@PeteHSM]

For a second there I thought Phil got some BDSM wheels for an extra kinky car

[@lomx]

Randy from Savage Garage mentioned your Murcielago project to the owner of an exotic car dealership in Miami. Vinwiki mentioned it too, about the gearbox swap. Obviously Tavarish knows about it. Some big American youtubers watching your work on this car...

[@driftworks]

Yeah a few people have mentioned them 👍

[@schoona90]

This car is miles in front of theirs....

[@joshissleeping]

do you know which vinwiki episode it was?

[@lomx]

@@joshissleepingNot exactly, I think it was about his love for the Murcielago. He's a bit of a matching numbers geek & said that this car wasn't a "real" manual car as it was converted from auto ,I don't agree.

[@PazzaAE86]

Ahh the 07 euro trip extravaganza... One of the all time adventures. Excited to see the wheels on the car, pretty sure it'll look mega.

[@driftworks]

😄

[@martinc8532]

And I was hoping for a set of custom built TSW Venoms...

[@theenglishtrucker1849]

Sorry Jay, we have to take your first answer, 2007. PMSL 🤦‍♂️ I like you even more now mate, hahaha

[@driftworks]

😄

[@mart1547]

They’ll make great coffee tables if Phil changes his mind.

[@driftworks]

😄

[@mrmoss149]

" The Rain Man of wheels". Jay- you are fucking KILLING IT!!! LMFAO!!!!

[@driftworks]

😄

[@paulpalmer8235]

SICK!!!!!

[@richardbaron2948]

Wow, they are stunning!! 3SDM smashed it with these..

[@driftworks]

🤘

[@MrLOZZA6451]

Sick 👌👌 Looking forward to the test fit

[@driftworks]

Cheers

[@someusername121]

I like the sort of "floating center" effect going on with this set of wheels. I don't think the front look would be improved with a one piece.

[@driftworks]

👍

[@mrclown7469]

I like it too. Gives them a kinda old school "turbo fan" look.

[@Vince32.]

Wheels look insane. Big props to you!

[@driftworks]

Thanks! 👍

[@stuf3804]

Awesome - they are going to look so impressive

[@driftworks]

Cheers 👍

[@_chenn]

They are bloody glorious! Buzzing to see them on the car

[@driftworks]

Thanks 👍

[@stewartnoel9810]

Brilliant video guys. Really enjoy the honrsrvand down to earth conversation and banter

[@driftworks]

Cheers 👍

[@Iamcodzilla]

This is such a good video- Such obvious genuine mates 🤙🏻👊🏻🙌🏻

[@driftworks]

👍 Cheers

[@matadk4330]

Daaaaamn can’t wait to see these mounted. 🚜

[@driftworks]

👍

[@SH3RIFF187]

I'm not even surprised anymore. Phil has some great ideas and pursues them until they are perfect. I can always appreciate the level of detail to each product and piece.

[@driftworks]

Thanks 👍

[@eddyagg]

Wheels maketh the car. It’s gonna look truly epic 👌

[@driftworks]

🤘

[@bridgedown1]

some of the nicest wheels ive ever seen plus great colour.

[@driftworks]

Cheers 👍

[@Matty.Hill_87]

Phil is just the UK scotto from hoonigans.. Both have massive carcaine issues and started a business to pay for it 🤷‍♂️🤣

[@driftworks]

Haha, 😄

[@simongranheim9737]

@@driftworks but unlike Scotto, Phil get his cars finished :) with the help of Jay and uncle Craig and other talented people around him. Everybody need a Jay and Craig to help solve the problems.

[@863rafael]

Stunning wicked wheels!

[@driftworks]

Thanks 🤘

[@mathisbohnhorst5971]

Dopest project on KZbin!!

[@driftworks]

Cheers

[@hevendranarayansamy2793]

Great video guys. Those wheels are hugh. Would love to see them on the lambo. Cant wait

[@driftworks]

👍 Thanks

[@yt0500323022]

I just love seeing a pop up for a new driftworks video (mustang content aside - sorry Jay!); so clearly you’re doing something right Phil!

[@driftworks]

👍

[@SpencerF6]

I've had boxes that big delivered when I've ordered a pair of sunglasses. Wheels look the bollocks! 😎😎😎😎

[@driftworks]

👍

[@joelgonsalez383]

i have been waiting for an update of the lambo like a crack head waiting for a 20 , nice still my favorite build to date

[@driftworks]

👍

[@user-zt4kz8rx8k]

That's mother of concavity :) Nice wheels Phil!

[@driftworks]

Thanks man!

[@btc1337]

this lambo is gonna be out of this world such a beautiful build and even better its built not bought legend 👍🔥🔥🔥

[@driftworks]

Cheers 🤘

[@TheBobes]

They look awesome. ❤️

[@driftworks]

Thanks!

[@Zerofightervi]

Wheels can make or break a car, I'd say they are the most important aftermarket mod you can make. Great choice.

[@6000maz]

Just awesome 👏🏻

[@driftworks]

Thanks 👍

[@barfmeister8509]

Love the wheels 👌

[@driftworks]

Cheers 👍

[@ValladolidArde]

Oh those are nice!!! love how the exterior ring the spokes rest no look like a bladed disc, super aggressive

[@driftworks]

Thanks man!

[@zhu1921]

Brilliant Wheel Design👍👍👍

[@driftworks]

Thanks 👍

[@lav773]

Now thats what you call SWEET WHEELS 👊🕶

[@driftworks]

Thanks

[@Freshiemaster]

And the best thing about this build is its going to get driven like its meant too! Even with million £ wheels! Awesome guys!

[@driftworks]

👍

[@steveworld3457]

Phil is becoming the Gordon Murray of modified cars! Loving the single minded vision..... Also it looks far too much fun working at DW!

[@driftworks]

😄

[@E30_Sunny]

awesome!!!!! Phil you are a legend .!

[@driftworks]

👍

[@E30_Sunny]

@@driftworks I actually remember Jay when he had hair and worked at oldbury BMW😂 . Took me a while to recognise him . I used to work at the body shop . Awesome videos and builds . Big Fan of your work 👍

[@chrisoakman1046]

Amazing carnt wait to see these fitted

[@driftworks]

👍

[@HEKTIC458]

The rear wheels look great! Nice design

[@driftworks]

Cheers 👍

[@deerpeter1]

Thank u Jay, I haven't laughed that hard in a while. Oh and the wheel's look awesome Phil 👊

[@driftworks]

🤘

[@deerpeter1]

@@driftworks And don't worry about the fronts. Don't go one piece, the meaty lip that the "hidden bolt" design gives it more of a Motorsports feel than a Stance boi look... 💯

[@BurpleRX7]

Stunning wheels, I now truly feel like a peasant knowing that all my cars wheels combined probably cost less than that piece of billet

[@darrenwillis1878]

Awesome wheels👌👍👍

[@driftworks]

Thanks 👍

[@31415926535ism]

They look awesome phil.

[@driftworks]

Thanks man!

[@mrmoss149]

Phil- we keep going because YOU keep going. Don't stop, mate. Any of you. Cheers

[@driftworks]

🤘 Will do!

[@glennmartin2403]

Keep the fronts - clean design and symmetry with rears appeals to the wheel geek in me.....they are both exceptional items of man jewellery!

[@driftworks]

👍

[@supercarspecifics]

congrat's on the amazing rim's , wooow brother can't wait to see them on the gtr murcie , you know what , while ago I made the comparrison of your shop dynamic like a guy ritchie film , but instead it's more like a episode of faulty tower's witch is my all time favorite import show from UK , I just can't figure out who's Basil in canada that comparison is a true honour

[@tkrc]

Dang!!! They some special rims indeed :) Jay does crack me up. Ive had a laugh with wheels on my little project. Bought some JR11 from you guys in ET30 for an old Civic, the internet told me they would fit sweet, turns out the different trailing arms/hubs I have make the track width wider making them NOT FIT, sold those, got some cheapo rims off facebook, stamped inside as the correct PCD, but when measured were something different so they also didnt fit :) Now running some OEM Honda/Enkei Integra DC2 wheels that are too narrow and need spacers because the fronts dont clear the integra brakes I put on it - PMSL custom cars, it'l be fun they said ha ha

[@driftworks]

Haha, yep, modified car life is difficult.

[@aspero23]

Insane looking! so nice stop be so picky and weard :D

[@driftworks]

Never 😄

[@GetUpFalcon]

Jay the voice of reason being well and truly drowned out!

[@driftworks]

Jay the voice of misery you mean. 🤓

[@bigcheese82]

They look great

[@driftworks]

Cheers

[@Vez-a-tron]

Those pistons are HUGE!

[@driftworks]

😄

[@technique275]

Stunning. That's it. Atb.

[@driftworks]

Thanks 👍

[@rinusbrand9993]

Phil You also went for the so called 7 spoke design as also applied in racing. This design is also my favorite. The concave of the front wheels will look good on Your Murci. I also know the ET of the frnt wheels is critical to prevent inner fender scraping.

[@driftworks]

🤘

[@pissedupgamer3802]

💥

[@Tim82621]

I would love a vid seeing you 3 talk over pictures of phils old (or current) cars. was wondering how the cars you were talking about in this video looked

[@driftworks]

It's anther video I've discussed doing for some time never managed. I should probably pull my finger out 😄

[@Ricky-cl5bu]

Class wheels

[@driftworks]

Cheers

[@HHCHunterYTC]

08:20 Jay "That's alright innit" lmfaooooo

[@driftworks]

😄

[@testpilot2184]

How heavy are these wheels?

[@Ricky-cl5bu]

PP. ,,,, perfectionist Phil

[@driftworks]

👍

[@Rombbb]

Niiice !

[@driftworks]

👍

[@justar6865]

Nice wheels

[@driftworks]

Thanks 👍

[@brynalban]

I bought those CR Kai's from Phil, reconditioned them to KH2 Gunmetal grey and put them on my R32 GTR back in the day. That kicked off my obsession with Work Wheels.

[@driftworks]

🤘 Hi Bryn.... Sorry 😄

[@brynalban]

@@driftworks I'll have to come to you soon for some ridonculous wheels for the R34!

[@mehmetguner5729]

I’ve been dying for an update on this... to be honest I love 3SDM wheels

[@driftworks]

👍

[@benblackwell8108]

Kid in a sweet shop lol 😆 . They do look the don tho . 👌

[@driftworks]

🤘

[@mohamedyasinarakkal5130]

Finally a murcielago

[@driftworks]

🤘

[@leehearsey]

Jays look when you said they probably won't fit was gold, wheels look amazing, would like to see the one piece fronts though...

[@driftworks]

😄

[@MegaSc84]

Wheels look absolutely awesome but Phil you looked a little hesitant when you saw the fronts.. On the car they will look amazing!!!

[@driftworks]

Thanks. Yeah they won't look too bad.

[@dimamihai7224]

Well...when can we expect to see them on the Murci’???🤩👌🏻

[@driftworks]

There's a little more work to do yet 👍

[@SuperAlicat1979]

First class wheels Phil they will have savage garage talking about your car again

[@driftworks]

Thanks man!

[@dotlaj]

Can not wait to see them on the car but I can understand why Phil was a bit disappointed with the fronts specially with the wide body I was inspecting more but they look fantastic 😁😉

[@driftworks]

The mad thing is, the front wheels are massively aggressive for a Murcielago..

[@CarbonCollectiveTV]

Wheels look sick, might need sealing in some Platinum Wheels!

[@driftworks]

Indeed! I've just used the last lot on the AC Schnitzer wheels for the V10 M3. Vid inbound in the next few days.

[@fatfroga9619]

Taka Kaira, now that is a blast from the past

[@driftworks]

It's part of the reason we started Driftworks. Taka Kaira was the only place to get cool stuff & it cost a fortune.

[@tootrue3953]

Christ on a bike. That's a tasty wheel.

[@driftworks]

👍

[@cedricdubost9213]

👍👍👍

[@Tim82621]

one piece front reveal next week? phil is going to get those for sure, and i approve

[@driftworks]

😄

[@samcrawford9503]

I like them wheels alot, do you know of a similar design that would be in a 17 at 5x100pcd

[@driftworks]

I don't I'm afraid. You will struggle to find anything even close as these are such low offset wide wheels. It's worth checking on Driftworks.com and using the filters to see what we can offer though.

[@Phil_T86]

I liked the spoke design but not sure on the outside edge between the spokes (It makes the wheel looks smaller) I think if that was more flat instead of of a slope it would look better. As long as your happy though 👍🏻

[@bowlerwildcatGaming1991]

There nice ass wheels for a nice ass Lamborghini your Lamborghini is going to look beautiful Phil all you need now is a Star Dropper exhaust from Japan

[@driftworks]

🤘 Cheers

[@tomb7704]

They look amazing Phil, give us a rough cost per corner, 7-10k?

[@79ped]

Yeeeessss

[@driftworks]

🤘

[@quest8795]

Hooly shiiit You can really appreciate just how concave they are when you see them from behind- absolutely nuts Have you told Gaz the sizes yet? Or will it just be a surprise for him when you turn up with those monsters?

[@driftworks]

They are the same size as the wheels on the car just without the spacers we've used to get the arches right.

[@MadDogCommunity]

hello phil from driftworks

[@driftworks]

👋

[@gen1c8rs88]

@@driftworks Great wheel width combo, wish Lamborghini and the Murcialago had a 60mm tire/2.5 inch wheel or 70mm/3 inch wheel width stagger and the Aventador should have had 20x10 and 21x13 and the SVJ should have had 20x10.5 and 21x13, sharing the Chirons tire sizes 285/30r20 and 355/25r21, would have possibly made the tires cheaper too😁🤗😥

[@Fishyb1zz]

What was the first wheels? The ones that were horrid? haha, I'm curious

[@MediocreHero66]

Now that's a dinner plate if I ever saw one!

[@driftworks]

👍

[@meandthefamily1485]

The rears are amazing, but the fronts ? agree with you phil not convinced sorry , it reminds me of the csl type wheels on e92 m3,s the rears , the spokes come out from the edge and suddenly dip in where the look of the e46 csl rears they concave immediately to the centre like your rears if I'm making sense you want the fronts to start concave immediately if possible, is that what you thought possibly ? your the wheel man Phil just an observation .

[@xKazza]

They are FAT! Phil will love them when they are on, it will look incredible

[@driftworks]

🤘

[@TopLobster1]

Id paint the spreader plate and the bolts, looks strange having these a different contrast? Amazing wheels tho! :)

[@driftworks]

I actually quite like the little bit of contrast, but I need to look at them more.

[@miber666]

Factory Lambo wheel caps fit with this ???

[@driftworks]

No. There are nice machined 3SDM centre caps.

[@PatrickPeterVlogs]

What are you planning on doing with the older wheels? would be interested if you were gonna flog 'em.

[@driftworks]

The ADV.1 will be for sale once the project is done 👍

[@PatrickPeterVlogs]

@@driftworks Hurry and get it done!

[@mrmoss149]

You're watching the " Phil Shopping Network". LMAO

[@driftworks]

😄

[@twinturbo1989]

Ever wondered why dw grew so much? These chaps are proper nerds and not jus salesmen...

[@driftworks]

For real! 😄

[@q8fly.]

The concave on both look good. No need to change them

[@driftworks]

👍

[@mazda_miata_]

This man’s front wheel is almost double the width of my Miata’s rear wheel... 😂😂

[@driftworks]

😄

[@charlesshamseldin9555]

You should definitely order one piece forged monoblocks for the fronts to better match the rear, and knowing you Phil (although I really don't know you Phil 😆) it would match infinitely better. Then just order another matching 3pc pair to match the ones you're not using and sell it as a square setup to recoup your investment.

[@driftworks]

That's some logic worthy of my own brain.

[@richardfallow]

2007 ay jay ;) mega wheels