That injector tester/cleaner is such a simple yet awesome tool. Thank you for doing a full demo, seeing that thing in action is quite interesting.
@MorFabIndustries6 жыл бұрын
TibzzTube I’m glad you enjoyed it!
@JVarela334 жыл бұрын
Thanks for the flow test. There's something satisfying about improving the balance of injectors.
@Goldwing1500rider2 жыл бұрын
I have never thought bout turbo’s issues can relate to fuel injectors… I purchased one of those machines to diagnose my fuel injectors. Great benefits!! I found one blown injector. Thank you for sharing.
@nickmac59536 жыл бұрын
Very cool and informative!
@MorFabIndustries6 жыл бұрын
Nick Mac thanks Nick 👍🏻👊🏻
@leafsneverwin6 жыл бұрын
Great video actually. You are quite intriguing! Work safe man, how old is your business? Every time I see you in Jimmy videos you are always doing something awesome
@MorFabIndustries6 жыл бұрын
McSwagger hey man thanks for the awesome comment! I’ve owned the company since 1999. I’ve done 99% word of mouth business since then. I just now started getting into the social media scene much more than I had been.
@douglaswalker85635 жыл бұрын
The problem could have just been a clogged filter screen. Why didn't you change the screen? Servicing usually involves changing the screen, o rings, spacers, and pintle cover. Great video by the way!
@MorFabIndustries5 жыл бұрын
To keep costs down (which in this area is paramount), we do different levels of service. Occasionally we will replace everything but most of the time its just o-rings and if they appear clogged, a backflush to clear the screens. If they continue to fail we recommend sending them back to the manufacturer for service or rebuild.
@Jadedwolf6 жыл бұрын
Good video my dude.
@MorFabIndustries6 жыл бұрын
Jadedwolf thanks brotha 👊🏻
@andrewnovak16006 жыл бұрын
What’s up Justin, It’s Andy, I’m Evan Merola’s buddy, we’ve met a couple times. I️ got a set of RC 440s that I’d love to toss on that machine to give them a check
@MorFabIndustries6 жыл бұрын
Hey man for sure. Bring them by whenever. Im usually here after 12 and until about 10pm.
@speeddr20006 жыл бұрын
I clean outboard injectors all the time. But instead of using the degreaser i use Power tune it from Mercury. Its a decarbonizer in the ultra sonic cleaner with a little heat. I have only had 1 injector not come back.
@MorFabIndustries6 жыл бұрын
speeddr2000 I’ll have to try that stuff out. It’s rare that I get a totally failed injector that isn’t physically damaged. The one in this vid was struck on the nozzle by a broken intake valve.
@speeddr20006 жыл бұрын
Boats might be different we get a lot of carbon. But the one injector that i couldn't get going again wouldn't click before i tested nor after soaking testing.
@Appa_S136 жыл бұрын
Man this was awesome
@Garrett_LCD6 жыл бұрын
Yo, this is Garrett we met at Jimmy's the other night. This is rad. I gotta bring you the injectors from my MK2. I've long suspected maybe one of them is sticking or hanging! Would be nice to know for sure.
@MorFabIndustries6 жыл бұрын
getamongst_it yeah man bring em down we will figure it out!
@alejo75486 жыл бұрын
I always wondered how the hell injectors were cleaned. Also, my mechanic told me to only clean them 2 times, then replace all four, for precaution, just as you. As you can tell fuel in my country is shitty AF 😂 Keep it up!
@MorFabIndustries6 жыл бұрын
Thanks! Fuel is shitty everywhere now.
@FollowJulian6 жыл бұрын
Oh well that was interesting to see and nobody shows how exactly work, i wish i have one of those mashines lol
@MorFabIndustries6 жыл бұрын
FollowJulian it is a nice machine to have!
@uPek450HL4 жыл бұрын
Max Gdi 400 high pressure injection test bench up to 400 bar, back flush and more, youtube Space Test 5005.
@MichaelWilliams-fc2fu6 жыл бұрын
Good staff man
@MorFabIndustries6 жыл бұрын
Thank you!!
@chrisnewbold98763 жыл бұрын
Nicely presented, no yelling at us..
@JDMshitbox4 жыл бұрын
Awesome video, very informative! Can you please briefly explain how to check the flow of the injector. For example if its a 2200cc injector what test do I run? I have the same machine and would appreciate any input you can provide. Thank you!
@kevy1142 жыл бұрын
good info mate,didn,t mention the strainers tho
@ssgviper71474 жыл бұрын
That was a cool video, I don’t understand the standing in front of the smart car part. ‘ you could probably still see the car’ if it was any bigger you could still see it anyways. I sat there and thought about that for a while. :)
@sellsytv31846 жыл бұрын
My man!
@aaronmad135 жыл бұрын
Awesome and vey informative video!
@johnpapa86814 жыл бұрын
Cylinders 1, 2, and 3 would run rich!, so if one injector is off, it will affect all the other injectors.
@amp2345 Жыл бұрын
Great video! How has the machine held up? Im shopping one for the shop, lots of cheap options with no real long term tetimonials
@MorFabIndustries Жыл бұрын
It’s been excellent actually. Not a single issue with it and I’ve had it 10 years or so now
@Bige4u3 жыл бұрын
0:49 .... some call them a coffin on wheels, you get crushed, you might as well get buried in it
@hightttech3 жыл бұрын
Go watch crash testing videos on these SMART CARS; OEM keeps the cabin from crushing in with engineering MAGIC.
@AWD_T6 жыл бұрын
I didn't know you service injectors. What do you charge to flow test and clean injectors? And what's the largest size you service?
@MorFabIndustries6 жыл бұрын
100/4 125/6 and 150/8 and i can do alll the way up to 2500cc
@NordicDan3 жыл бұрын
Do you use a specialized/proprietary solution in your ultrasonic, or is there an off the shelf solution or mixture that's safe for the plastic parts and the electrical coils in the injectors?
@jameslozano35096 жыл бұрын
Info info info so much info, keep it up. Ifb you could do a video on old ford eec computers that would be great, I know nobody cares about it and the videos out of it suck.
@gingerman60072 жыл бұрын
What is the name of fluid that you are you using for cleaning injectors?
@joeydelmarsjr.6468 ай бұрын
i got a question if I have oem injector 1pin hole @ 243.8cc p/m and swap for 4pin hole 232.1cc p/m, will the 4pin hole spray more fuel than the single pin hole? can the 5.9L magnum benefit from 4pinhole vs the oem 1pin hole?
@skirkland19804 жыл бұрын
Yay datsun!
@hightttech3 жыл бұрын
Is flow test done at 3 bar, 100% IDC for 1 minute???
@vangovan44433 жыл бұрын
Damn good Vid Thanks.
@jodylambert56483 жыл бұрын
Have you every replace your pump if so which pump you use
@rudynegrete56583 жыл бұрын
What fluid do you use for calibration? What if go for more time ultrasonic cleaning on inj. 4?
@jarevcaesarbriones2174 жыл бұрын
what solution do you use for the FI cleaning machine
@chicago888888883 жыл бұрын
Could this machine tell you what CC your injectors are?
@corbinmarks56886 жыл бұрын
can you do diesel injectors?
@MorFabIndustries6 жыл бұрын
Unfortunately no. This machine will only handle gas injectors.
@kevinc32364 жыл бұрын
did you try backflow as well?
@dragradialperformance35405 жыл бұрын
Nice video! I'm curious why you said that further cleaning risked damaging the injector. What's the thinking behind that comment? I haven't found a downside to extra cleaning time.
@MorFabIndustries5 жыл бұрын
Excess time in the ultrasonic can cause pitting on metal. Especially if there are any brass parts in the injector. I have found excessive time in the ultrasonic caused leaking seats on some cheaper injectors.
@dragradialperformance35405 жыл бұрын
@@MorFabIndustries Interesting. I have a hard time picturing a typical degreaser or injector cleaner being able to pit brass. I would think you could soak a brass part in cleaner for weeks and not see any significant pitting. Now on a chinese injector, I wouldn't trust it any further than I can throw it.
@MorFabIndustries5 жыл бұрын
You are correct. You could soak them forever. However in an ultrasonic bath the sound waves create small bubbles on the surface of what you're cleaning. Those small bubbles implode causing a pretty powerful shockwave. Enough to pit metal. Check KZbin for cavitation or how an ultrasonic works. Pretty neat stuff actually!
@dragradialperformance35405 жыл бұрын
@@MorFabIndustries I'll do that, thanks. I knew about the bubbles as I have one, but I didn't know they could pit metal! Wow. Unrelated, I have this massive ultrasonic tank I'm working on. Came out of the hospital, where it was used clean surgical instruments. Easily big enough to put two cylinder heads in, with a ridiculous amount of industrial strength transducers. Can't wait to get that thing running.
@MorFabIndustries5 жыл бұрын
That's awesome! I wanna see it in action when it's done!
@tomharrison67624 жыл бұрын
Chinese and 'champagne as your calibration fluid?
@NDZ4464 жыл бұрын
Can these be used for diesel injector cleaning
@alexi0773 жыл бұрын
HAH i paid like 45 € for 2 front springs 3 weeks ago :D:D:D
@highcompressionmotorsports63915 жыл бұрын
What type of fluid is in the flow portion
@ltethan6493 жыл бұрын
i have one of these testers and was wondering what you used for your test fluid. I was going to use straight techron injector cleaner concentrate. what are you using?
@smithraymond090293 жыл бұрын
It seems most people use mineral spirits to actually flow test the injectors and I hear them say they use Seafoam to do the ultrasonic cleaning.
@Atetus945 жыл бұрын
What fluid do You use in ultrasonic machine? Destilled water would be fine? Or something "more special"?
@MorFabIndustries5 жыл бұрын
Clear mineral spirits from home depot
@Atetus945 жыл бұрын
@@MorFabIndustries thanks for Your reply, one more question - what do You think about cleaning injectors with carb cleaner spray DIY way?
@Goldwing1500rider2 жыл бұрын
@@Atetus94 .. I wouldn’t use spray on the FI as it would ruin the coil inside., would lock up. Use the bath and wipe.
@johnpapa86814 жыл бұрын
Try back flushing.
@hulahulahoppah5 жыл бұрын
Hey man. I just ordered this exact model machine. What solution do use you test the injectors?
@MorFabIndustries5 жыл бұрын
clear mineral spirits from home depot
@Trippy_Hippy894 жыл бұрын
@@MorFabIndustries when your done do you just pulse the injector to get residual mineral spirits out or do you flush that out with clean fuel or do you just hook back up after and let the little residual cleaning solution go that is left in the injector.
@Nick6Michael4 жыл бұрын
1:45 The why
@advancedperformance97215 жыл бұрын
What fluid you used ? Wana somthing easy to buy and available in the market
@MorFabIndustries5 жыл бұрын
clear mineral spirits.
@advancedperformance97215 жыл бұрын
Thank u sir
@permanentwave5 жыл бұрын
Can you order this machine on amazon ?
@MorFabIndustries5 жыл бұрын
Yes
@kevinhawley33034 жыл бұрын
i spy with my lil eye a Datsun ............ s30z???
@kayran20245 жыл бұрын
You can look at our products
@mridware96945 жыл бұрын
After how many km ??
@MorFabIndustries5 жыл бұрын
depends on the fuel you're running
@mridware96945 жыл бұрын
@@MorFabIndustries 91
@tomharrison67623 жыл бұрын
Buy a real test bench
@JinKazama923 жыл бұрын
Wrong solution!!!
@hightttech3 жыл бұрын
What is your preferred solution? For ultrasonic or flow tester?