Nice! Just a tip, the long 3" screws should have been installed on the doorstop side (the side where the weather stripping is). This ensures that you not only grab the 2X4s, but you also have the maximum amount of it to prevent forced entry. Also, I'd recommend making the hole in the jamb for the deadbolt more oblong (top to bottom) this helps with shifting foundations. You can do this by marking the centre of the hole, and stitching 2 1" diameter holes together and chisel for cleanup to make it look professional.
@FastFixYouTube3 жыл бұрын
Great stuff here. I'm going to pin your comment to the top of the list. Thanks for the helpful information!
@turbotension3 жыл бұрын
The screws are only as good as the plate itself. Good screws with massive shear loads will hold but the end of that strike plate will just pop out. Obviously, every door has it’s limits too. When I do this I try and use a #10x3 but have done #12x4 on garage doors. Usually whatever will sit flush in the plate. Spax screws and GRK R4 screws are great for this.
@lockmanmd87383 жыл бұрын
@@turbotension True, but testing on the reinforcing plate from Schlage has shown that it's sufficient for your normal forcing attacks....perhaps not enough for driving a forklift through but then again, who's driving a forklift to your door? haha, Great input nevertheless.
@averyroman45043 жыл бұрын
instablaster.
@angelbautista7602 Жыл бұрын
p
@JB-iu5vk3 жыл бұрын
Thanks for turning off the sound for the drilling parts. Hardly anyone thinks to do that in these how-to videos, but good production skills make a huge difference. This was helpful, thank you.
@FastFixYouTube3 жыл бұрын
Haha, true. I “forgot” on the first few videos I’ve done, but have remembered since. Thanks for the nice comment 👍
@samtheskoolie2 жыл бұрын
Yes!!! That drives me insane too! I make sure to remove it in my videos!!
@jmfia2391 Жыл бұрын
Grow tf up
@holdencoffman69307 ай бұрын
Agreed! Such a cool editing touch.
@EddieGuilbeau3 жыл бұрын
Your vid helped me . Thanks
@FastFixYouTube3 жыл бұрын
Glad to hear that! I appreciate the comment 👍
@Masterdp17 Жыл бұрын
Why is your door handle going the wrong direction?
@FastFixYouTube Жыл бұрын
Because I installed it upside down. The wife pointed it out and it’s good now.
@raidendoernte89312 жыл бұрын
What size hole saw
@FastFixYouTube2 жыл бұрын
Hello. 1” on this one.
@angryadrien Жыл бұрын
Great video! I've never seen the doorlatch lever positioned like that... does it work better for you in this position?
@FastFixYouTube Жыл бұрын
🤣🤣🤣 this is by far the best shade thrown at my upside down door handle. Bravo good sir! 👍
@Urbanmoon11 ай бұрын
@@FastFixKZbin 🤣🤣🤣 Here I am scrolling the comments, trying to find out what the heck is with that lever? What have I missed?! I'm trying to learn and it appeared my assumption of how levers go was wrong as I noticed yours in this video teaching others, and no one commented about it. 🤔😂
@tallguy9714 жыл бұрын
Pretty well presented but why is your door lever mounted backwards?
@FastFixYouTube4 жыл бұрын
Haha, you’re the second one to catch that! It has since been installed properly.
@xl335tm12 жыл бұрын
Good hack, but would be a better look if you had the door lever in the correct orientation toward the inside of the door, not the outside.
@FastFixYouTube2 жыл бұрын
Hello. Yes….My wife said as much when she saw the handle. It has since been remedied. Thanks for the comment 👍
@amarsta4 жыл бұрын
The security plate will give better protection if the screws are put closer to the center of the stud wall by rotating the plate 180 degrees. As installed here, they are very close to the edge and easy for a burglar to bust through
@sergvegas54463 жыл бұрын
Tips for ya : After your done tracing out the template u can cut it with a utility knife first then use the chisel that way the stricke plate can fit perfect with no gaps!
@FastFixYouTube3 жыл бұрын
Good tip! Appreciated!
@joemaiuro3647 Жыл бұрын
another tip , dont trace it screw the plate where it goes and that will give you a metal edge to trace around with your razor then chisel away.
@Cirelli_Ryan Жыл бұрын
@@joemaiuro3647 if you trace the plate - the space will be a bit too big-
@Cirelli_Ryan Жыл бұрын
How would a gap be left if you only use a chisel to make the strike plate divot ?
@joemaiuro3647 Жыл бұрын
Not if a razor is used
@4.7m_views2 жыл бұрын
I like how considerate this man is by muting the audio of the drilling part.
@FastFixYouTube2 жыл бұрын
You are welcome! Always something I couldn’t understand why others didn’t do. Thanks for the comment 👍
@victorvek5227 Жыл бұрын
Love the backwards install on the handle.
@FastFixYouTube Жыл бұрын
Yes, it was a big hit! 🤣
@cugamer8862 Жыл бұрын
Great video, but upvote for the first twenty seconds alone. No BS, no cheesy graphics, told me what the video was about and who should watch it. Straight to the point, well done.
@FastFixYouTube Жыл бұрын
Appreciated! 👍👍👍
@dannyjensen49544 жыл бұрын
Great video. I really liked it. Easy to follow. I just had the video running while I was doing the job. I saved $190. Thanks.
@FastFixYouTube4 жыл бұрын
Always good to hear money saving stories! I’m also glad you found this video through the first one!
@diverdave4056 Жыл бұрын
i always use a sharp razor knife to cut the outline of the plate - first screw the plate in place then cut around it to get nice lines to follow up with !
@FastFixYouTube Жыл бұрын
Good advice! 👍👍👍
@christophercrowle97533 жыл бұрын
Why is the handle to the door the wrong way around?
@FastFixYouTube3 жыл бұрын
The honest answer is because I installed it wrong. No other reason except negligence and a bad eye for improperly installed door handles...
@spikefivefivefive2 жыл бұрын
Make the hole as small as possible to accommodate the deadbolt regardless of the strike opening. It will be much stronger and in interior applications you may not even need a strike plate depending on your finishing skills.
@FastFixYouTube2 жыл бұрын
True story! 👍
@zoe7657 Жыл бұрын
False. Entryway should always have a plate and extended screws
@tiffanyg35844 жыл бұрын
I don’t usually leave comments but this video was so helpful and informative that leaving a like and comment was the least that I could do. Thank you
@FastFixYouTube4 жыл бұрын
Thank you, Tiffany! I very much appreciate the kind words and the like. It really is the best way to support my videos. I’m glad the video helped you and I hope you have a great day!
@MBeeezzy3 жыл бұрын
Why is your handle facing the wrong way? Curious.
@FastFixYouTube3 жыл бұрын
Hello. I live in Australia and that’s how all of our door handles are. LOL, no I just didn’t realize I had installed it upside backwards. 🤦♂️
@demetriusrobinson18253 жыл бұрын
I noticed the handle also! :)
@scottdowney43182 жыл бұрын
yes, the long screws are on the wrong side of the strike plate. You need to redo that. You want them in the center of the 2x4 framing, not the edge. The edge will break easily when someone brute kicks in the door.
@FastFixYouTube2 жыл бұрын
Hello. Thank you for the comment. I have redone the incorrect placement of the screws. If someone decides to brute the door, they better also have body armor 😵😂
@mark007624 жыл бұрын
The security plate should have been screws next to the inside door frame and the lever handle was facing out. I did like hw he started his chisel in the midddle and worked down and up I will try that next time.
@FastFixYouTube4 жыл бұрын
Haha, yeah you’re the 3rd one to bust me on the door handle. Not sure how I didn’t catch that... thanks for the comment! 👍
@sethg95113 жыл бұрын
Good clean work. One suggestion: deepen the bolt hole a little more than needed- this allows for room if the door shifts/swells/etc. And yes 3" screws on the strike.Good vid
@FastFixYouTube3 жыл бұрын
Thanks! I appreciate the suggestion 👍
@mickblock3 жыл бұрын
v This method of marking is actually strait forward no messing around.
@GNWJNO2 жыл бұрын
I saw someone else use lipstick on the dead bolt which seemed to work well also. Great video!
@FastFixYouTube2 жыл бұрын
Haha, yes I can see lipstick working just as well. 👍
@Bhatt_Hole Жыл бұрын
I don't believe in tooth brushing, as it is sinful. So I'll have to purchase some toothpaste specifically for this woodworking task. Can this be done with any toothpaste, or only the kind which has fluoride? Will the type made for sensitive teeth work as well? How about whitening toothpaste? There are just so many choices at the Piggly Wiggly.
@FastFixYouTube Жыл бұрын
A tough conundrum you are in. I’d skip the toothpaste All together and use lipstick or maybe Mayo. I hear Heinz works best. 🤣🤣👍
@marslivingsimply5 жыл бұрын
Ridiculously helpful! Such a clear explanation :)
@FastFixYouTube5 жыл бұрын
Good to hear! I appreciate the comment!
@buttonpkmn3 жыл бұрын
I'm in the middle of a project right now, and you just confirmed my next move. Thanks for the straight forward video! I just subscribed!
@FastFixYouTube3 жыл бұрын
You bet! I appreciate the comment 👍
@joereyn3945 Жыл бұрын
Hmm. How do I fill in an old strike plate hole from an old door, with that hole just below where the new hole would be. Seems problematic. Like I need a new frame. Maybe there is away.
@FastFixYouTube Жыл бұрын
Other than removing the frame, I’d cut out and trim a piece of wood then glue it, sand, and paint. Should cover it up fairly well.
@shaunthompson1574 Жыл бұрын
Amazed that hardly anyone picked up on the door handle being the wrong way in the comments 😂😂😂
@FastFixYouTube Жыл бұрын
🤣🤣🤣 right, I wish someone would’ve told me!
@denisecatlett7203Ай бұрын
Thank you for the easy tutorial. The only change I will make is useing nail polish.
@FastFixYouTube4 күн бұрын
Hello! You’re welcome! Nailpolish, toothpaste, pasta sauce… all work! 😂👍
@brickman4099 ай бұрын
I have a metal door with a metal door frame that I want to install a dead bolt on. How hard do you think it would be to cut away the metal on the door frame to install the strike plate and do you have any tips for that?
@FastFixYouTube9 ай бұрын
Hello. Sorry, I’ve never attempted to do what you’re describing. Appreciate the question!
@brawndo61882 жыл бұрын
You have your handle on backwards on the door behind you, the handle is sticking past the door
@FastFixYouTube2 жыл бұрын
Yes…my wife caught that and it’s remedied!
@CyndiLH Жыл бұрын
Just butchered my first attempt although it works but remembered your video. Wish I had watched it first LOL. Have one more to do and I think you've empowered me...
@FastFixYouTube Жыл бұрын
Best of lucky, Cindy! The nice thing is, the door jab isn’t something people or you see often. Let me know how it goes!
@emptysetowl97153 жыл бұрын
Thank god a someone who can edit a video for the key points. Good job Fast Fix.
@FastFixYouTube3 жыл бұрын
Thank you sir! I appreciate the comment 👍
@Wiradjuri2172 жыл бұрын
3 eighths of an inch. 7 sixteenths of an inch. What a horrible measurement system 🤢🤮
@FastFixYouTube2 жыл бұрын
Haha, no lie!
@wildboy92004 Жыл бұрын
Thank you for showing this. I'm frantically trying to install the last of my Mother's door locks and the strike plate my Dad previously installed will not allow the dead bolt to enter. I was able to insert the dead bolt into the existing hole but the size of the new strike plate needed to be chiseled longer, or up and down. I'm thankful to know I can just chisel it so thank you.
@FastFixYouTube Жыл бұрын
Absolutely! I’m glad this helped solve your problem. Thanks for the comment 👍
@peterjohnjoseph Жыл бұрын
fostner bits my people. you can drill those corners perfect and chisel out the rest.
@FastFixYouTube Жыл бұрын
Yes, that’s very true. Good tip 👍
@Tlomps2 жыл бұрын
Easy to follow and easy to understand the steps. I used to install entry doors about four years ago and am doing one today. This is exactly the refresher course I needed. ✌🏼❤️
@FastFixYouTube2 жыл бұрын
Glad to hear that! Best of luck on the install!
@andre1987eph5 ай бұрын
3:23 dude you turned off the sound at the worst possible time
@FastFixYouTube4 ай бұрын
Hello. I did? I thought I was saving eardrums by muting it. Lol my bad if I left out some info! Thanks for commenting and have a great day.
@jacakjacak2 жыл бұрын
Super ,thank you very much , sab and like afcourse.
@FastFixYouTube2 жыл бұрын
Thank you! Much appreciated 👍
@ziptiefighter9 ай бұрын
Here's how you do a YT vid. Short and sweet and no extra fluff. And muting the volume when operating noisy power tools. Thankyou for a helpful vid 👏
@FastFixYouTube9 ай бұрын
No problem! Thanks for the comment. And yes, my thoughts exactly! Happy New Year.
@tradio3948 Жыл бұрын
You do know you have the door knob handle on upside down don’t you?
@FastFixYouTube Жыл бұрын
After my wife told me I did. Haha
@gregparks17853 жыл бұрын
Great video! I am not much of a handy man so I always wondered how difficult that was. Looks pretty easy!
@FastFixYouTube3 жыл бұрын
It's not bad at all. This was my third time doing this job, so I had little experience as well. Thanks for the comment!
@dylongomez3007 Жыл бұрын
Great video!! What’s the size of the hole saw used?
@FastFixYouTube Жыл бұрын
I believe it was 1” if I recall. Should say on the packaging if you’re shopping for a kit like the one I used. 👍
@MarioPenalvermamae4 жыл бұрын
Toothpaste! Who would have known! Great work on this how-to!
@FastFixYouTube4 жыл бұрын
Lol, right? Thanks for the comment!
@TheBrooklandsBeat3 жыл бұрын
Lipstick works well for this too!
@MikeRule-rr2ug Жыл бұрын
Why is your lever installed backwards
@FastFixYouTube Жыл бұрын
Simple answer is because I eff’d it up. It has since been remedied 👍
@cacaulaymulkin7724 Жыл бұрын
This door handle has been installed back to front.
@FastFixYouTube Жыл бұрын
The wife caught that too. It has since been remedied.
@yordanpopov10 ай бұрын
Can I do the same thing to the door itself? My problem is that my door has the circle hole where the faceplate is supposed to be but it needs to have the standard rectangular one so I can install a smart lock.
@FastFixYouTube10 ай бұрын
Hello. There should be kits/templates that will allow you to accomplish that. So, the edge of the door where the bolt extends out needs to be a rectangle instead of a circle?
@yordanpopov10 ай бұрын
@@FastFixKZbin yes, most doors have it "carved" but not my door.
@TheOriginal2 жыл бұрын
HAAAA!! Freaking genius!!! I was gonna use paint or whiteout!! Toothpaste I have a lot of! Thanks bro!!
@FastFixYouTube2 жыл бұрын
Lol, you bet! 👍👍👍
@TheOriginal2 жыл бұрын
Hey bro, I have salvaged tools. I have a B&D drill but don't have that bit that makes a hole. What is it called please? Is there anyway to make the hole if that bit is not there? Any way to improvise?
@FastFixYouTube2 жыл бұрын
Hello. Getting the bit is by far your best option. They are relatively cheap. It’s called a hole saw bit or auger bit. Both names are accurate. It’s 1” in diameter.
@Doowopsid Жыл бұрын
Great job all around with your video. Short, clear explanations with your demonstrating, silencing the drill noise, easy to follow. Gave it a like and subscribed. Thank you!
@FastFixYouTube Жыл бұрын
I appreciate that! Thanks 👍
@ericjames8655 Жыл бұрын
Toothpaste that’s gotta be the cleanest way ever
@FastFixYouTube Жыл бұрын
🤣🤣🤣👍
@markmcgregor4302 жыл бұрын
Why is the door handle on backwards??
@FastFixYouTube2 жыл бұрын
I goofed it up and didn’t notice….my wife did, however and it has since been remedied.
@makeworldbetterbyinnovation Жыл бұрын
wait why is your lever on the wrong side???
@FastFixYouTube Жыл бұрын
Opposite Day that day. I just had a brain fart…
@amunkhufu Жыл бұрын
What to do if you have a latch hole that is incorreclty measured and must be redone? Can you fill it with wood filler and redrill the hole?
@FastFixYouTube Жыл бұрын
how much wood was removed? Or, how much wood filler would you be using? Too much will crack and screws will not be secure.
@amunkhufu Жыл бұрын
@@FastFixKZbin 1 1/2 length, 1 inch width, 1/2 inch depth. If this is a big hole to be filled with filler, what would be other solutions?
@freshsodaa70232 жыл бұрын
So i have a question, hopefully you can answer cause i cant really find a solution anywhere...my problem is that the wood inside where the "plate" would go is gone, so i cant screw in a plate in, which causes the door to just open and close easily even when its locked because i cant put a plate there to hold the latch. Im basically looking for how to refill that hole, i was thinking about dry wall? But i honestly have no idea about any of this, so hopefully you can help.
@FastFixYouTube2 жыл бұрын
Hello. That’s pretty strange that the wood is gone. Where did it go? Kidding aside, I would not fill with drywall. It’s not durable enough to hold a strike plate over time and provides little to no security as it’s very breakable. I’d either replace the entire door frame (or just that side) or fill with wood. Strange that the wood is gone. Did someone damage the door frame?
@freshsodaa70232 жыл бұрын
@@FastFixKZbin Lol Its all good, but yeah i guess it was just old because it just started breaking off into pieces when i tried to screw it in. I tried to put a small block of wood in there, but it ended up breaking over time.
@awalton9024 Жыл бұрын
what if it's not an f-ing dead bolt???????
@FastFixYouTube Жыл бұрын
I’d search KZbin
@kathylewis75434 жыл бұрын
Do you use the same drill piece included in the kit to drill on the side of the door for the deadbolt to come out the same one on the door frame for the entrance into the strike plate?
@FastFixYouTube4 жыл бұрын
Hello. Both hole boring bits are included in the kit. You'll use the larger sized one for the door to create an opening for the deadbolt. The smaller sized one is used to create a void in the door itself (to house the bolt contraption) and into the door jab for the bolt to extend into. So the answer to your question (as I understand it) is yes. Best of luck!
@alandobb39492 жыл бұрын
Is it me or is the handle on the wrong way round.
@FastFixYouTube2 жыл бұрын
It’s you………haha, no you’re right. Handle was on backwards. I’d have never noticed except for the wife telling me hours later….and the comments 👍
@rementis Жыл бұрын
This is exactly the information I needed. Nice job explaining and editing!
@FastFixYouTube Жыл бұрын
Thank you! Glad it helped 👍
@ermasmith43119 ай бұрын
Thank you so much! You made the mortise cut very easy, even for a 72 years old female.
@FastFixYouTube9 ай бұрын
Wonderful! Glad to hear that. Nice job! Love reading comments like this ☺️👍👍👍
@andrewgodby81263 жыл бұрын
Why did you install the lever like that?
@FastFixYouTube3 жыл бұрын
Brain fart…caught it later. Of course the damage was done and been catching hell every since!
@jaybonkersbonkers36133 жыл бұрын
Was the handle on the door at start on back to front 😂
@FastFixYouTube3 жыл бұрын
Yup. Never gonna hear the end of it either. 😂🤣😂
@ganeshrvgk3 жыл бұрын
What is the name of the tool you used to chip the wood, I didn't get the name of it
@FastFixYouTube3 жыл бұрын
Hello. The tool is called a chisel. You can find them at most home improvement stores or Harbor Freight which is where I got mine. Thanks for the question.
@GUSYLocksmiths Жыл бұрын
Your door handle is the wrong way :)))
@FastFixYouTube Жыл бұрын
Sure was! The wife caught that and I never would have.
@MarkSteele-yn3bl Жыл бұрын
how come the door handle is on wrong way
@FastFixYouTube Жыл бұрын
Ehh, just wanted to mess with the wife. It only lasted a day…. 😂
@swann7472 жыл бұрын
I don’t know why you didn’t drill the pilot holes before you did the checkout, you had it marked when you traced out the plate then chiseled it away. The toothpaste is a good idea to know where the bolt will fit, I’m going to remember that one. Also there are striker plate jigs that hammer in the border cut without the risk of splitting away the timber close to the edge and can use for doors and door jambs.
@FastFixYouTube2 жыл бұрын
Ohh, that’s a good tip. Splintering the wood is the biggest threat in doing this. Nice. Thanks for the suggestion 👍
@John14-232 жыл бұрын
I dont have that kind of toothpaste.
@FastFixYouTube2 жыл бұрын
Not to worry! Whitening, sensitive, enamel building, cavity fighting, plaque fighting, breath helping, and any brand all work! 🤣🤣👍
@Janzep992 жыл бұрын
My contractor said to use Sensodyne as some frames have feelings. I’m more of a lipstick guy. Cherry red. Don’t judge me.
@FastFixYouTube2 жыл бұрын
😂😂😂 I suppose I should’ve asked the frame it’s preference. Sorry man, I do have to judge. Everyone knows Hot Pink is a much better color.
@bishopp142 жыл бұрын
I keep a tube of lipstick in my toolbox just for marking things like you did with the toothpaste. This isn't advisable to do with the wife's favorite makeup though...
@FastFixYouTube2 жыл бұрын
Ha! Indeed! 🤣🤣🤣
@rocb42222 жыл бұрын
Thanks first interior door install
@FastFixYouTube2 жыл бұрын
You bet! Glad it helped 👍
@nataliesurinova68122 жыл бұрын
Thanks for uploading this video it's super helpful! I just had a quick question, we're trying to reinforce our door they've had break-ins but we've noticed the wood where the screws were scrumbled as we took them out so now we have to make room for a longer strike plate I assume but we're also having a problem stripping the screws bc it's been hard to get the wood screws to easily screw in. Any tips I see you made a hole first will that help ? Thanks again
@FastFixYouTube2 жыл бұрын
Hello. I’m not sure I’m totally understanding your problem. Are you saying that there’s not enough wood or the wood is damaged to the point where the screws won’t grab securely?
@nataliesurinova68122 жыл бұрын
Yes,when we took out the orig screws the holes kinda crumbled so there's no wood space below each of the holes now
@nataliesurinova68122 жыл бұрын
I just assumed we'd have to find a longer strike plate since we can't securely screw the longer nails into the crumbled old wood holes
@jonpenkava44502 жыл бұрын
Forreal, dope video. Consice, no extra fluff no filler. I can f@#$ with that! Try and get the shortest ad reads when you blow up to match!
@FastFixYouTube2 жыл бұрын
No doubt! Cut the bs and just do it, right? Thanks man 👍
@Bandrik4 жыл бұрын
I was already considering using paint or some other goop to find where the bolt will strike, but I rather like your toothpaste idea. Much easier to clean up. Thanks for the tip and the video!
@FastFixYouTube4 жыл бұрын
You had the right idea! I had toothpaste nearby for some reason and the idea just hit me. Best of luck on your install!
@Bandrik4 жыл бұрын
@@FastFixKZbin Thanks! I definitely feel more confident in doing it after watching your videos. :)
@alandobb39492 жыл бұрын
You could also use a combination square, set it on the edge of the door, push the rule part through till it meets the bolt, tighten, then put the square on the jamb, mark where the rule ends, this method will only work if the door & jamb are level.
@richardparis87383 жыл бұрын
I think lipstick would work
@FastFixYouTube3 жыл бұрын
Definitely would! Just be careful about staining.
@keithhampton97002 жыл бұрын
I use a felt round for cabinet doors. Just stick the felt on the bolt center and use a sharpie to color it. Then shut door and work bolt untill it marks the door jam.Easy Peasy!!
@FastFixYouTube2 жыл бұрын
Oh yep, that would well too. Thanks for the suggestion 👍
@R0cketRed6 ай бұрын
Toothpaste great idea for marking!
@FastFixYouTube6 ай бұрын
Thanks! I hope this helps you. I appreciate your comment! 👍👍👍
@R0cketRed6 ай бұрын
@@FastFixKZbin it will, I am renovating my entire second floor and replacing 9 doors that the previous owners had the hinges mounted way to high so im filling those holes and putting the new spot where it should be located and getting the exact position will be easier with your trick, I was just going to line it up on the trim and mark the spot and draw a line in. Thx!
@SpottPhoto2 жыл бұрын
Thank you. This video gave me the exact info I needed in my first search on the topic. The toothpaste technique is a absolute time saver!
@FastFixYouTube2 жыл бұрын
You are welcome! Glad the video was of some help. I appreciate the comment 👍
@DaeroLee_Solid_Aerospace Жыл бұрын
It is very useful for me to follow. I wonded how I coulde make a hole on a door frame. Now I underastand what I need to buy tools for this task.
@FastFixYouTube Жыл бұрын
Glad it was helpful!
@ChadPenoyer2 жыл бұрын
I like the toothpaste method!
@FastFixYouTube2 жыл бұрын
Thanks! I appreciate the comment 👍
@GetToThePointplz123 Жыл бұрын
Handle is backwards
@FastFixYouTube Жыл бұрын
The wife called that out and it has since been corrected. I kinda liked it…
@cameronp57282 жыл бұрын
I guess my chisel's suck lol
@FastFixYouTube2 жыл бұрын
Mine aren’t much better. Harbor Freight specials!
@samkulkarni777 Жыл бұрын
Saw your video. Did something like this for the first time. Impressed with the result. Thank you. But had to do a little bit of caulking too.
@FastFixYouTube Жыл бұрын
Glad this helped! Ehh, a little caulking isn’t too bad. Been there done that!
@Retrocomputernerd Жыл бұрын
In addition to longer screws, the screws should have been placed with the strike plate rotated 180 degrees so there is more wood between the screws and the inside edge of the door. Having the screws so close to the edge is going to make it much easier to kick the door in. This is the reason the screws are not centered in the strike plate, to provide more distance to the edge and therefor more wood to prevent a kick in.
@FastFixYouTube Жыл бұрын
Good info 👍
@robertvega3078 Жыл бұрын
I use nail polish to mark where the bolt goes, works like a charm then a simple rag to wipe the bolt where I used the nail polish
@FastFixYouTube Жыл бұрын
Yep, that’ll work!
@shelms4882 жыл бұрын
Why is the door handle backwards?
@FastFixYouTube2 жыл бұрын
I installed it backwards. Not to worry, my wife quickly discovered the error and it has been corrected. 👍
@shelms4882 жыл бұрын
@@FastFixKZbin thanks for the reply. Surprised I was the only comment to mention it.
@Rosk032 жыл бұрын
That toothpaste trick is money! I could of swore i was in the correct location. Toothpaste said otherwise. Thanks a ton
@FastFixYouTube2 жыл бұрын
Haha, you bet!
@jacobrinehart8780 Жыл бұрын
To remove material after cutting the outline, start the chisel cut in the hole facing up or down at your desired thickness removal and it comes out in one chunk a lot of times
@FastFixYouTube Жыл бұрын
Great tip!
@teamefra53053 жыл бұрын
Has anyone noticed that the black door knob is installed incorrectly🤣🤣
@FastFixYouTube3 жыл бұрын
Yes, they have! 🤣🤣🤣
@imabeapirate3 жыл бұрын
Damn and I thought I was so clever using the toothpaste... Great minds I guess
@FastFixYouTube3 жыл бұрын
absolutely!
@danc65234 жыл бұрын
Awesome guide, worked well with the kit too. Thanks!
@FastFixYouTube11 ай бұрын
You bet!
@JAPowers4 ай бұрын
Great job. Ty.
@FastFixYouTube4 ай бұрын
You bet! Thanks for the comment 👍
@jwhybourn3 жыл бұрын
you attached the reinforced strike plate to door jamb and not the 2 x 4 in the wall. same effect as a 1" screw
@FastFixYouTube3 жыл бұрын
Correct. Mistakes… I made one yesterday at a vegas slot machine.
@JC-jz6rx2 жыл бұрын
What’s that machine used for the hole
@FastFixYouTube2 жыл бұрын
Hello. It’s a Milwaukee M12 2407-22 cordless drill. The bit used is called a hole saw or auger bit. I believe it was 1”. Thanks for the question.
@JC-jz6rx2 жыл бұрын
@@FastFixKZbin thanks!
@1Brain4Wheels Жыл бұрын
This was the video I was looking for, thank you so much!
@FastFixYouTube Жыл бұрын
Glad it was helpful!
@walterwhite17 ай бұрын
Thanks brother
@FastFixYouTube7 ай бұрын
Any time!
@jeetpatel60875 ай бұрын
Thanks so much
@FastFixYouTube5 ай бұрын
You're welcome!
@MilwaukeeMax Жыл бұрын
Your door handle is on backwards
@FastFixYouTube Жыл бұрын
Indeed it was. The wife caught that and it has since been remedied. 🤦♂️
@MilwaukeeMax Жыл бұрын
Thank god for wives
@JonLuskin4 ай бұрын
Super helpful. Thanks for putting this out there.
@FastFixYouTube4 ай бұрын
No problem! Thank you!
@johnwagner473 жыл бұрын
Question for you..could you have used the guide and router bit instead of chiseling the whole strike plate out?
@FastFixYouTube3 жыл бұрын
Hello. Yes, the guide and router but should provide a good template to make this look a bit nicer.
@wam4985 Жыл бұрын
First time installing a deadbolt. The old deadbolt I’m replacing had a hole in the frame that is too small for the new one. I’m talking about the hole behind the strike plate. How would you make it wider?
@FastFixYouTube Жыл бұрын
This is the hole the deadbolt pushes into, right? If so, a hole saw like the one I used in this video is what you need. Mine was 1” if I remember correctly.
@wam4985 Жыл бұрын
@@FastFixKZbin yes. I don’t think the hole saw would work because it’s not a through hole. It’s like 1” deep. I’m having to grind it down with a bit. It’s crazy.