MOST OPTIMAL AMD Radeon adrenaline settings -- for all games, Fortnite, Tarkov, Valorant, etc.

Due to a request I made this video for you guys with AMD gpus to ensure the most optimal AMD settings. I hope it helps those of you guys with issues.

[@Blazeee22]

I have been struggling with trying to get rid of very vivid jagged edges and couldn't figure out how to get rid of it because I thought super resolution and everything would help. Thank you, this has helped me big time

[@CadenSteffy.]

This is the only video out there that has actually helped me

[@aimanapeez1490]

Thx for the settings,I actually notice some improvement in Sekiro before I was getting 70-79fps but after the optimization it was getting about 80-85fps it not much but there was improvement

[@pablodaniellopeztamborelli4072]

Wait, sekiro is uncapped to 60 frames, how do you do

[@aimanapeez1490]

@@pablodaniellopeztamborelli4072 I use fps unlocker for sekiro

[@theotherLewbowski]

First guide ive seen saying to turn off freesync. Also how hot is ur gpu getting before the fans start spinning with fan stop enabled. Mine kick in at 30 degrees which is good for browsing but when gaming the fans spin up to keep things cool.

[@resonance32807]

I made the mistake of telling people to put freesync off, it shoudl LAWAYS be on as long as it supports your desired refresh rate(s). My gpu usually didn’t kick in with the fans until like 60 C.

[@wolflowgamingtv]

Hey thanks for this video! There is almost no video regarding AMD gpu users. Also, Do u have those post graphic effects for tarkov? Cheers

[@resonance32807]

Check out my other video, post fx for tarkov.

[@alexivani7452]

As well as turning on Resizebar it’s also a good idea to enable XMP (Intel) DOCP (AMD) in your BIOS to get the most out of your RAM

[@basicrow]

yeaa u should

[@Main-itt]

where is that option?

[@frxzen4real]

How to do that in AMD??

[@alexivani7452]

@@Main-itt you do it by first accessing your BIOS….While your PC is booting up, keep pressing the “Delete” key…that will bring you to the BIOS settings where you can turn on Resizebar…this will only work if you’re using the newer windows partition system GPT…if you’re the older “MBR” then do NOT use ResizeBar

[@alexivani7452]

@@frxzen4real Open up your AMD Adrenaline software, click “Performance” then click “Tuning” on this page you should see a tab labelled “AMD SmartAccess Memory” if it’s labelled as “Not Supported” you’ll need to enter the System Bios to enable one setting. From your desktop press and hold the left “Shift” key, then click the Start button, right click the power icon and click “restart” keep holding down the left shift key until the blue screen pops up…then click “Troubleshoot” then “Advanced Options” then click UFI or UEFI Firmware settings, this will reboot you into your BIOS settings…the BIOS will look different depending on your Motherboard manufacturer but you should be able to find what you’re looking for easily…im on a ROG Strix motherboard and the resize bar option is at the top right of the page…if you can’t find it you can Google you motherboards make & model and type in Resize Bar options…hope this helps

[@Anci3nTKnowledg3]

When you turn on color enhancement it's make some thing nicer and brighter but I noticed also when it's on you see on alot of KZbin videos or screenshots or whatever alot of waird artificial blocky artifacts etc when you turn it off its gone but it makes the total picture less vibrant. I can't find anyone talking about it on the internet yet

[@resonance32807]

Never happened to me before…very interesting.

[@Anci3nTKnowledg3]

@@resonance32807 you will notice it in dark areas in some KZbin videos atleast I do not all content. Maybe it's my card faulty or my screen I don't know

[@gases_]

Hi, really nice video, congratulations, I subscribed to your channel. I wanted to ask you a question, but by activating Fan Tuning what does it change compared to when it is deactivated? To my knowledge, it's only useful when you want to manually change the GPU fan curve. (Sorry for some mistakes but I'm using a translator)

[@resonance32807]

Hey, so when activating fan tuning as long as u don’t mess with the curves, everything will stay the same.

[@gases_]

@@resonance32807 thank you. Since you are so kind and also knowledgeable, I wanted to ask you one more thing. Is it true that there is a difference in performance depending on the drivers you install (Minimal, Full and Driver Only)? Which driver do you recommend for greater stability

[@resonance32807]

@@gases_ I would go for whatever is recommended. I think it’s full for recommended? I’m not sure. At the end of the day just make sure u have latest driver version plus software.

[@resonance32807]

@@gases_ and no there should be zero to negligible difference in performance

[@70094kid]

Hey wassup man have you seen or heard of the tuning section locked VRAM on some systems?

[@resonance32807]

You mean locking the vram speeds or like the vram tuning option is locked?

[@DonnyDeleto]

Man thank you for this video, i realized now that my fens werent spinning the whole time....

[@ThatBoiShrek]

what do you recommend fornite amd graphics setting

[@IsraelMartinezM7]

OMG! If heard that zero thingy thing in fans are helpful but now that I realize that it actually makes your game worse. That is why games I play go up to almost 60 c at times. I don’t know of telestaion thing idk I put that to override and off. Does that do anything because it overrides the telestation graphics and turns it off completely? I’ve seen other videos of people doing that so idk if it is true

[@resonance32807]

I have never heard of a “telestation” setting…make sure ur adrenaline is up to date

[@theotherLewbowski]

Ur fans should kick in around 30 degrees. Adjust the rest of ur fan curve if 60 is too high. Zero fan is fine

[@countvonaltibar236]

Great video, help me setup my first AMD GPU

[@thegrandgeneral01]

What power plan is the best to use for amd cpus?

[@resonance32807]

Use the high performance power plan.

[@aaquibali1914]

⁠I'm getting high performance and ultimate performance (amd setting)

[@Saj123]

@@aaquibali1914 do ultimate

[@nat_528]

Does it have a similar feature like nvidia ansel where you can do freecam and take in game pictures?

[@adillpickle6762]

Thanks for the zero fan trick. Mine dropped 10c when I turned that off

[@nareshnagarkoti7506]

settings>display GPU Scaling: enabled Scaling Mode: Full panel (don't use 'preserve aspect ratio'} Integer Scaling: disabled After years of playing best setting I have encountered to play at non-native resolution, without making image look ugly blurry. Had to share with those who needed some insight to play on lower resolution rather than native resolution of their monitor.

[@kev-t1674]

Nice , thanks. Vidéo POST FX?

[@Eqxu]

Im back to ask about the same thing again lol. If I use native res, does it matter what i set my scaling too? And does it even make any difference if I use native res? Because whenever I change it, it feels different. Unless its just placebo or something

[@resonance32807]

It should be placebo, although I keep mine on center

[@Eqxu]

@resonance32807 It might be placebo but I'm like 90% sure my games feel different whenever I change the scale setting. Since I'm using native, should I just use the one that feels best to me?

[@peterdodge7513]

@5.25 Performance, Settings. You said to set to 'minimum' sample interval, but did you mean to set to 'maximum' sample rate so that it reduces the impact of sampling?

[@resonance32807]

But then a higher sampling rate would increase the impact no?

[@resonance32807]

Oh I see what you mean, yes set it 5 maximum. Sorry about that

[@Highhandicap9]

I don't have the tuning selection in the performance tab... my system has "AMD Ryzen 7 5800H with Radeon Graphics". My question is, does it matter if I turn off the metrics without the tuning option? Not trying to ruin my new setup lol

[@resonance32807]

Yeah metrics won’t affect anything…it only logs ur performance and data consumption…it’s unnecessary logging.

[@Highhandicap9]

@@resonance32807 thank you kind sir it helped a few fps and that is all I can ask for

[@MrCastiel]

Do this settings work with OC? The fan speed aswell?

[@resonance32807]

For over clocking, I would def turn off zero rpm and these settings would work just fine. Just make sure you have sufficient cooling because the last thing you want is a hot gpu making all your other components hotter in the case.

[@resonance32807]

For fan speed you would want to set it above 80 for maximum speed…I wouldn’t mess with the fan curves themselves thp

[@Wreld]

thank you so much this boosted my frames overall

[@destroyer9117]

Hi, I'm using the translator so I don't know if my problem is understood correctly, but I don't know if you can help me, 6 months ago I bought an assembled pc, totally new components, I have been having crashes for 3 months, but they are never blue screens, they are only system crashes (it restarts) but when it restarts it tells me "there is no signal). It should be noted that I use a tv as a monitor connected with an hdmi 2.0 cable to the computer, the question is that after these 3 months, I have already deleted, reinstalled drivers with ddu, updated firmware, and the problem persists , I took it to the technician and the technician told me that the problem is the TV and the hdmi cable, that I should buy a monitor and a displaysport cable (that will solve my problem, he says). But the other problem that I have is that when I go to the device manager and I go to the gpu part, it appears that my graphics card (rx 6800xt) works correctly but when I go to events there I "Device not started (amdwddmg)", So I don't know if this can also be the cause of the problem of my random reboots, I have the latest version of drivers, chipset, updated BIOS. My components are "R5 5600x cpu, Motherboard B550M A AC Wi-fi, RX 6800xt gpu, ram 2x16 T-force 3200mhz, Antec 750w 80plus Gold power supply" I have also seen that when I activate the resizable bar in My system, at any time it reboots and when it reboots that option deactivates itself. I don't know if you can help me or if you also think that buying the monitor and having the displaysport cable my problem is solved..

[@resonance32807]

So you are currently connecting to a TV right now with an hdmi cable? Your pc restarting can be due to various problems, such as driver issues and software issues. A few of them can be overheating or you may just have a faulty/broken motherboard. If I’m not mistaken the b550 series don’t habe a great reputation for lasting nor working well. However try this fix first…go to control panel - power options - choose what power buttons do - change settings thay are currently unavailable- and then UNCHECK the box called FAST STARTUP. Also make sure in the BIOS that you are getting sufficient cooling, if you have an AIO make sure it’s on 100 percent always. Also make sure your RAM is not over clocked at all, and make sure anything is not overclocked.

[@SDOM09]

Also resizable bar ahould be enabled

[@rskl3284]

With it enabled on my system it made the whole system run slow and games near unplayable so depends on the system

[@senrign]

I would agree that most AMD so called "enhancements" are hindrance to your performance.

[@Eqxu]

I've seen a lot of people say that its best to use the "no scaling" option for NVIDIA gpus, what's the equivalent for AMD gpus? Would it be center? or?

[@resonance32807]

It would be center.

[@Eqxu]

@@resonance32807 Thank you

[@Eqxu]

@@resonance32807 Should I also change it for the game itself in the AMD Software, or just through the display settings? I'm asking because when I checked the games settings, the default option is called "Global setting default" which I think means aspect ratio? Idk tho

[@resonance32807]

@@Eqxu yeah u should change within individual games too.

[@Wesley-_-ZA]

can i get the tarkov post fx settings keen to try out yours as you the first youtuber i've come across with a amd card

[@resonance32807]

I have a video on it…check it out on my homepage!

[@stevebathory]

Do you perfectly know what you are talking about, or just have feelings, intuitions, and rumors how these things should be set?

[@resonance32807]

These are settings I have tinkered with myself and backed with testing from other KZbinrs.

[@leoz2753]

thanks you so much

[@Jakiyyyyy]

For some reason AMD Software don't save my game settings like Sharpness, Brightness, Saturation. It keep resetted everytime after reboot. What do?

[@resonance32807]

Those are because you must have another overriding software…such as MSI afterburner or any other overclocking software.

[@farhanverified1]

Same bro in my warzone filters works good but when we save game its gun I think I'm using nvidia overlay and amd anrelian both that's why i have to delete nvidia right

[@farhanverified1]

​​@resonance32807 Same bro in my warzone filters works good but when we save game its gone when I end recording I think I'm using nvidia overlay and amd anrelian both that's why i have to delete nvidia right

[@freewayG0D]

I heard Full Panel is for stretched better

[@yahyasharaf3231]

ayee I love this type of honest guys, I don't trust the viral vids for such thing

[@Military_Knowledge_HubYT]

What is your eft postfx settings?

[@resonance32807]

Check out my other video on that!

[@joshuasimkulet8766]

What driver version do you recommend????

[@resonance32807]

The most up to date ones for sure. Always go with the most recent ones unless there is a huge bug or issue that you know about

[@gigs1167]

Thanks

[@pedropierre9594]

Zero RPM is actually really useful, because your gpu fans die, and this feature will add years to them

[@resonance32807]

Yeah but I notice my fans never kick in until the temps are like 75 degrees plus

[@tenshi9029]

struggling to run minecraft currently even though the 6700xt is a beast.

[@resonance32807]

Jeez make sure your components are bottlenecked at that point

[@resonance32807]

Not*

[@tenshi9029]

@@resonance32807 Fixed it now, the ram was running at 2400mhz. Enable docp and everything works awesome now

[@lat1zy]

I might be able to help you, cause I had the same problem.. What’s your CPU? Is it overheating/ throttling? What resolution are you playing? What’s your render distance in game? Did you update to the newest drivers (old amd drivers used to struggle with Minecraft) What’s your gpu temp while playing and how many fps?

[@tenshi9029]

@@lat1zy Nah its fine now, i finally get the stupidly high 3k fps lmao. Ram was bottlenecking everything way too much

[@FreeKill_fn]

Now i have screen Tearing Thanks!!!

[@resonance32807]

LOL SORRY please watch my most recent video…we are not supposed to turn of freesync my bad my bad

[@Jpemi27_]

thank u

[@hyonic6159]

i done this and it made my sensitivity on my game super low? any ideas why?

[@hyonic6159]

sorted it sorry it wasn’t to do with amd settings.

[@MobSayko]

Nope zero rpm works fine its there to save the lifespan of the gpu fans, example if u just brows or watch movies, it will automatically ramp up if you launch a game

[@resonance32807]

Nope whenever I launch a game it stays idle.

[@dovydas4036]

​@@resonance32807that's because your gpu is running cool

[@resonance32807]

@@dovydas4036 not really, around 60 under full load but with it on around 40-50

[@DonnyDeleto]

Is Anti lag still a no go for Eft?

[@resonance32807]

No I think it actually helps with eft in my case at least

[@rehearse7826]

Helo do you know if the 7900 xt has problems with performance mode?

[@resonance32807]

No I don't, generally AMD cards do struggle with performance mode but it can't be confirmed until you try it for yourself.

[@rehearse7826]

@@resonance32807 thats fr annoying i have to go with the 4070 ti then

[@resonance32807]

@@rehearse7826 yea well AMD cards will always be my go to under reasonable price to performance ratios…but for now NVDIA takes the W for stability and guaranteed performance across all games. My card works great for almost every game out there except fortnite on performance mode. If you want a fix for performance mode you can check out my previous video but that will always involve dx12.

[@rehearse7826]

@@resonance32807 yerah i saw but i wanna get 360 fps consistently and that will sadly hold me back :(

[@deaddeyedante]

@@rehearse7826 You can fix performance mode problems by increasing the minimum gpu frequency from 0 mhz. Bring it up to about 400mhz from the max frequency. For example, if max frequency is say 2800mhz, set min frequency to 2400mhz. It'll take away the frame drops.

[@Eqxu]

If I don't use stretched res, what should I put for the scaling mode?

[@resonance32807]

You can just keep it center.

[@resonance32807]

Preserve ratio also works as well.

[@Eqxu]

@resonance32807 oh okay, what about full screen? also which would be the "best" if I play native res?

[@resonance32807]

@@Eqxu best for native is just preserve aspect ratio.

[@femboy_twink]

turn on resize bar, that's free perfomance

[@resonance32807]

Yes but I don’t have an AMD exclusive system, so it dosent do anything for me.

[@user-ui2nl3fh7q]

What driver are you using

[@resonance32807]

23.9.3 as of right now

[@garys.674]

What card do you have?

[@resonance32807]

6800XT from asrock

[@jonathanhalko745]

hello are the game link to a path. In your video? I play on steam and for some reason the exe file link to AMD does not have a path. I have to link another one of the same exe files to change the FPS and settings. The first one without path I cannot delete, and it has the correct name for the game. I can link the exe for the game both the new one will not have the correct name sometimes it in China or Japan when It should be sawing just (game)

[@resonance32807]

I do not have an exe path..maybe you have installed the same game but in diff launchers? Like apex on steam once and apex on origin so the files are all messed up?

[@jonathanhalko745]

I have only used steam for installing games. one has shining resonance refrain as the game it does not have an exe path and the other one is called (game) when I launch the game exe file it starts up the shining resonance refrain play time is connected to the (game)exe file when I start up the game using the shining resonance refrain it opens though steam, but the game exe file is the one running. game has path link. shining resonance refrain does not have link. maybe not an exe file both are the same game.

[@ThatBoiShrek]

for the spcfic game

[@lestdevover1019]

why scaling center? it makes black bars on 4:3

[@resonance32807]

I’m saying scaling center after u have done CRU to make ur display and native res the same stretched res…therefore forcing display scaling. Ofc don’t use it if u don’t use stretch res

[@BuckRBLX]

Do these work on any amd card?

[@resonance32807]

Yes, any AMD card

[@Flyz23r_]

Yo why I don’t have the same drive as you I don’t have the performance thing and tuning can u help me pls

[@resonance32807]

Download DDU and do a clean restart. Then download drivers from AMD website and select the FULL installation. This will give you the settings.

[@Flyz23r_]

Yo i still didnt got the tuning tab@@resonance32807

[@Flyz23r_]

yo i daw that with integrated graphics, there isnt all the tab and all, damn poor me xd btw ty for the guide i got a 20 fps boost@@resonance32807

[@alanbenyamin487]

This good for wz2? I got a 7900 xtx

[@resonance32807]

Yes these settings are good for warzone 2… I run around 180-200 fps on average but with a 7900xtx that’ll be crazy good. Just make sure u have a VERY good cpu (min 12 cores to avoid a bottleneck)

[@dovydas4036]

​@@resonance32807Cores are not important for gaming, 6-8 are more than fine

[@alanbenyamin487]

Thanks. Unfortunately, I have a 5 7600x . It was a bundle deal with an MSI b650 MB . Yesterday I had an issue in WZ2 where I was sub 100 fps. It's hard to find amd/in game settings for WZ2 . If you could make a vid for it that would be great as I'm sure I'm not the only one.🍻

[@dovydas4036]

@@alanbenyamin487 U are the only one 1. Update all your drivers 2. Optimize or debloat windows 3. Check your temps 4. Increase your min gpu frequency in AMD ADRENALIN software

[@resonance32807]

SKIP TO 4:08 for a really important AMD setting.

[@ooopsie3681]

I don’t have the setting in the control panel but I’m pretty sure it’s the reason why my exhaust fan doesn’t spin

[@resonance32807]

@@ooopsie3681 make sure u habe updated ur drivers and disable more power tool if u habe that

[@musakiovlr]

do u know what is the meaning of 4ms percentile?

[@resonance32807]

It’s pretty inaccurate but I believe it’s just the game response time gpu wise.

[@musakiovlr]

how much time u got on every games? like valorant and cs2 maybe? any diff? cus i got 7ms for cs2, sometimes 7 sometimes 4 @@resonance32807

[@On1yLucid_]

I dont have the tuning thing ?

[@resonance32807]

Make sure you have latest amd drivers.

[@chandrashekhar5802]

how to download the software becaouse i accidentily uninstall it pls answer

[@resonance32807]

Search up amd drivers, and fill out the form. Press submit and you will get a link for the download.

[@HexxuSz]

brother what monitor do you run to have saturation 150 lmao

[@resonance32807]

I mean to me it looks a lot more vibrant, we might be using different panels and monitor color settings as well. I use and IPS panel with the warm preset I believe

[@slimsevonbarrowstone9814]

humm you say its for all games what about the RP game called second life ????

[@PrimeDefy]

it wont let me go to manual tuning

[@PrimeDefy]

well now it does but i dont have the same layout as you

[@PrimeDefy]

nvm

[@jart122]

How is this helping anyone? Is probably people running games in 75hz or less monitors. AMD free sync is needed n fresync or gsync monitors. This settings are the best settings for you and your build and not for everyone.

[@resonance32807]

Well if you are playing on 75 hz or less you better be using freesync!

[@freecss9330]

What does Mhz do ? Min Acoustic Limit

[@resonance32807]

if we are talking acoustics, it must mean the speed of one of your components. Mhz is the frequency typically associated with GPU and RAM memory, bear in mind that cpu goes by ghz. Lowering your "mhz" would basically make components slower, and lowering temps and system fan noise.

[@freecss9330]

@@resonance32807 so what should my mhz be ?

[@resonance32807]

@@freecss9330 it should be at automatic, so it’s not supposed to always be static. It should be dynamic depending on your load.

[@freecss9330]

@@resonance32807 Well for me it says I can change it, idk what to put it at but the min to set is 300 and up to like 15k+

[@resonance32807]

@@freecss9330 are you talking about gpu mhz? If so, set it to the least it can be, so 300 MHz.

[@orion205]

Don’t follow this anti lag is good freesync is too you should use them

[@resonance32807]

Anti lag is still shady but freesync is def good

[@linkuzoh]

why turn off freesync?

[@resonance32807]

Free sync gives a lot more input delay.. it locks ur frames at ur monitors refresh rate to avoid tearing and whatever but in competitive gaming it gives you a disadvantage

[@BrownBabyJesus]

@@resonance32807 Freesync syncs your monitors refresh rate to your current fps, if your fps is above your max refresh rate it simply does nothing.

[@resonance32807]

@@BrownBabyJesus oh I thought it still added input delay tho…I never knew that. Thanks!

[@nastyyoda5673]

@@resonance32807 you can enable anti lag it will decrease the input delay

[@Savathussie]

turn off freesync? yeah ya lost me on that one bud.

[@user-dv5ym2bv3w]

Yours sound is to low

[@SouthCaliDreams]

asmr voice

[@Gloria-vm1jc]

Why turn off Radeon super reslution?

[@resonance32807]

If u search it up, it provides nearly no performance boost while making ur game more blurry. At this dat and age fsr and dlss exist so if necessary use those before touching this feature that does nearly nothing.

[@joeynova9745]

post fx

[@resonance32807]

Check out other video