Motion Pro Cable Luber | Motorcycle Superstore

[@avtarchana609]

I have seen so many videos of this tool and no body and I say no body explained the mechanism of tool ie graduated or the tapped rubber seal to accommodate different size cables. The tool company should hire you to demonstrate the tool. Good on you. Thanks. 🙏

[@aodhmacraynall8932]

I bought one that looks pretty much like yours, i.e., two screws. It works perfectly. When I say it works perfectly, I mean that if you tighten it down it will push lubricant down the tube. You waste a little at the top but I don't know any other method of doing this that doesn't waste some material. The good thing about using it that usually you don't have to remove your cable totally.

[@nyetloki]

Downvote because WD40 IS NOT A LUBE.

[@michaelshawngollaher9446]

Doesn't work on the top side connections for dirt bike throttle cables. They are in a rounded guide and the clamp is for straight cables. Might work if you pull the cables and try from the carb side and push the fluid up towards the bars.

[@billyglenjr5327]

I'd like to see an unedited demo of this product.

[@robmitchell716]

what he says about the devise is right but the bit aboit lub and a paper funnel not working odds just plain wrong. motor bike and cycle riders lubed their cables with paper funnels for decades before this type of tool appeared in the 1970s. Don't lie young fella. just tell the truth. It's a good product.

[@vampcaff]

this product is snake oil. I bought it and it's just as messy, if not more than using a plastic bag and rubber band

[@MrSuperpat]

true that.

[@frankmatthews3755]

I wonder if that is why he did not do an actual demonstration and just talked through the process and using the device as a visual aid only?

[@locotrucker46]

awesome tutorial. thx

[@Crazy-Chicken-Media]

thanks for showing that it works.........

[@db13401]

Use LPS ....WD-40 insn't a lubricant.....

[@richardtschida2321]

It does not work it does not seal all I got was a mess. Trust me it doesn't work. Also I bought a bead buddy again doesn't work you have to have a specific spaceing of spoke to the edge of the rim. Not happy with motion pro!!!