This video helped immensely, the hardest part was removing the old adhesive. Thanks!
@QuickFixMN4 жыл бұрын
Thanks a lot kindly share the video farther
@marmaly3 жыл бұрын
DO NOT remove the back first. You will tear the ribbon cable for the fingerprint sensor. It must be unplugged and freed up before removing the back. This should be in the description.
@QuickFixMN3 жыл бұрын
Thanks for suggestions 🙏
@BalrogslayerXD92 жыл бұрын
Geeze thanks for the late response smh
@xxxViceroyxxx2 жыл бұрын
@@BalrogslayerXD9 i did this too lol
@FreshTechCo Жыл бұрын
So, if you don't remove the back first, how do you get to the fingerprint sensor to unplug it?
@randyhammer7777 Жыл бұрын
@@FreshTechCo I'm guessing he means don't pull it away from the phone after separating it. But keep it very close until you do? Not sure. I agree, makes little sense as stated.
@mattfields52822 жыл бұрын
This is an example of what not to do.
@michellemartinelli14303 жыл бұрын
It would be nice if it had some narration so you know what stuff he's doing at what point and what type of glue he's using and so on and so forth
@HydroHeroH202 жыл бұрын
Quick note. It's a to hex, not a 5 pointed star
@Matrucos34 жыл бұрын
Thanks for the video! How would the process change if I just need to change the glass screen?
@Artsy_Arie3 жыл бұрын
I don't think the process changes at all. To put on the new glass screen, the sensor wire goes behind the battery. To remove the old screen so a fresh unbroken screen can be put in, requires this process. Most complicated fix I've had to try, but cheaper than new phone
@annmorganwoodard95353 жыл бұрын
My repair person says he need a specific glue to put together my moto g 5 stylus 5g. Can you please tell me what kind of glue you used go I can get my phone back.
@lsmith36773 жыл бұрын
What size screwdriver bit did you use to take the screws out?
@annawerner13 жыл бұрын
I am glad you showed how to put it back together😄 getting ready to fix my husbands phone
@Dormdad094 жыл бұрын
I wish you would have shown what glue you used
@QuickFixMN4 жыл бұрын
U can use any kind of glue I also use different and some time I use double tape Aw well .
@deathloopgamer88723 жыл бұрын
Don't just use any glue. You can but if you use something like superglue replacing the screen again will be a real challenge. You wanna use a contact adhesive for screens or good double tape all which you can Google. Don't USE Super glue.
@tuliesco13 жыл бұрын
B-7000 or e-6000 starts with that and research.
@muhhamadavdol37813 жыл бұрын
@@deathloopgamer8872 Also important, he's using a specialized applicator. You shouldn't just get a children's bottle of glue with a large nozzle because any mess you make risks spilling over into the circuitry which can become a fire hazard due to short circuiting (and some glues are highly electrically conductive). @james mcfarland Notice that the points of contact from the casing to the glue is a thin line even less than 1 millimeter.
@pietersoeters99833 жыл бұрын
no test new screen before glueing??
@doodoobrn3 жыл бұрын
'This type of screwdriver.' Ah, the blur tip
@guibg76572 жыл бұрын
You killed the battery
@karthikmohan80863 жыл бұрын
Where can I find screen replacement for Moto g stylus?
@QuickFixMN3 жыл бұрын
Amazon
@everonbrown24993 жыл бұрын
Did your Amazon screen work if so which one you get!?
@muhhamadavdol37813 жыл бұрын
@@everonbrown2499 I recently received mine from Phone Remedies. They have their own website. Be careful and do your due diligence when purchasing sensitive parts and replacements from Amazon. Some manufacturers are cheaply made and many are sourced from low-cost Chinese factories. Even "expensive" options on Amazon can be cheaply produced but are marked up for high profit margins. When it comes to your personal or business Smart phone, invest your time and money to protect your phone.
@everonbrown24993 жыл бұрын
I got my new screen can I pay you to fix for me I can mail it to you and how much you charge?
@QuickFixMN3 жыл бұрын
@@everonbrown2499 $40
@TheXtremeBoltGuy3 жыл бұрын
I just want to replace the glass in front of the screen, is it possible to do so without taking the whole phone apart from the inside out?
@QuickFixMN3 жыл бұрын
Yes but that is not much reliable and not very lost long
@joshmyers75513 жыл бұрын
What size was that screwdriver? I want to make sure the set I buy has the right size? 0.8? Thank you for this video, you're a lifesaver.