MOTOFAB 3” LEVELING KIT & UPPER CONTROL ARM INSTALL

[@jeremyTallen1]

Sometimes I watch these videos just to see something rust free. I can't remember the last time I have seen a rust free vehicle.

[@dylansmith697]

Same. I can’t wait to go down south soon and get a rust free vehicle

[@allofarisk]

damn that sucks

[@ItsDawss]

Chompers setup would look so good on this w full clears

[@Holt443]

Loving the Vmax build, some new headlights and some 35s on those 20s would put a cherry on top!

[@claylewis402]

Congrats on your shop. Now you have some room. Happy for you.

[@austinbond8634]

This is the perfect set up! Keep it like this! Clean and simple

[@gfish3713]

The truck is looking great can’t wait to see what wheels and tires you put on it

[@SOUTHERN_DIESELS]

The vmax is looking good can’t wait to see some more upgrades.

[@KeoVore99]

I think you should stick with a level on the vmax. Take the channel back to its roots with this one. Also so happy to see the shop build. It’s been a long time coming for you and well deserved.

[@jamesmccall8924]

G13’s and 35’s off shorty on the vmax?

[@309Adventures]

Can’t wait to see the header install on this truck

[@alexthibodeaux8083]

Crazy to see how far you have come on your channel you got 8-9 trucks and a shop now

[@allenjohnson2014]

Rear fender well liners

[@Bubbas_garage]

Boi if those trail boss wheels were polished or chrome it’d be perfect

[@isaacwoods6116]

Rear wheel well liners, front valance off with some clears would be minty, Also would love to see chompers setup on her👌

[@deviantarsenal]

Looks pretty damn good now!

[@LeviMitchell-e6c]

I got a truck just like that black and I have 35s on a level great setup keep up the good work

[@mitch4550]

Lower valance needs to go!! Truck looks sick as always!

[@MTmotorsco]

Looks clean 🧼

[@GarCar06]

always a good day when mr.lmf uploads!!

[@9502silverado]

6:55 or you can swap the struts from side to side, LF on the RF and RF on the LF.

[@jaydinmeinzer8454]

I was wondering the same thing

[@ethanandrus4718]

Pickup looks great! I love the red

[@JMarty-mn3sm]

the VMAX is a sweet truck no lie!

[@Chevywhoopwhoop]

Looks great bro!!! Got the same set up 🤙🏻

[@CarsonHornbuckle]

The level completely changed the look of the truck for the better

[@DieselsRollinCoal]

It did fr but rear needs to be raised a little higher looks tooted

[@CarsonHornbuckle]

@@DieselsRollinCoal I think it looks perfect how it is

[@DieselsRollinCoal]

@@CarsonHornbuckle to each their own least its not squatted hoping he doesn’t lower the back more😭

[@CarsonHornbuckle]

@@DieselsRollinCoal yeah he normally keeps his trucks leveled and also he said he wasn’t touching the back of it I want to know what wheel setup he is gonna run though

[@DieselsRollinCoal]

@@CarsonHornbuckle ya He said tho he may lower the back if it looks nose diving with the wheels n tires which idk how itd nose dive when front is 2inchs higher

[@brownsdetailing]

you should definitely do drop shackles on the v max and throw the setup off chomper for the time being

[@Whistling_diesel_fan]

It's looking good baby squatted 😍😍

[@exsampel]

Looks sick man can’t wait for performance mods on this one (maybe😅)

[@D_gravy24]

I have a 2011 Silverado and I put that same level on my truck and it rode so bad but I didn’t have the upper control arms, then I just got a RC much better now 😂

[@fisherlambert]

he brought the outro back ayyy

[@seventysevens8065]

Since you have lifted most all other trucks , build like a special daily so you can really enjoy it daily , you can do various things to each truck ,

[@peyton4352]

Have the same leveling kit a uca’s on my 2011 silverado and any wheel and tire setup it rubs the uca’s. After two years needed a front end rebuild

[@colewinland]

Very interested in the exhaust. I 5sp swapped my truck a while back when I was putting a new frame under it.

[@TylerThornton-b2q]

I have some like wedges almost from harbor freight, work amazing on ball joints and stuff, that one came out easy but may help ya out idk forsure the name but have a u chapped wedge then a bar to hit/ pull on

[@PaytonWoodard-e4j]

Keep up the good work 👍.

[@K-44467]

You need to get tint and headlights asap

[@whotrethatyoungan4191]

I took my leveling kit off and bought 2.5inch rough country lift struts truck has a lil lean and stance looks great

[@joeamos3245]

Can’t Waite to see some more 6.0 content

[@Ivanrparrigin]

3 inch moto fab is perfect for the Vmax just needs some 22/24x12s and giovani streets

[@rftsfan1479]

those trqil boss wheels look sexy on it, and on most of the trucks!

[@matthewtittle9672]

Ever thought about swapping the struts from driver to passenger when putting the puck on and not have to man handle the bottom bolt brackets?

[@ThatTexasObs]

That startup transition at the beginning was fole

[@ThatTexasObs]

Dope

[@FishingWithJameson1712]

Sweet rig Chase

[@704.nathan]

Color match and 6’s or grapps would be KILLER

[@Thatwhite95obs]

Should do a tint install on the vmax like you did with the old obs.

[@justinostroskie4482]

Hear me out color match grille black bowtie . Color matched headlights or black with red . Space out those trail boss wheels color matched mirrors and.. tint of course

[@destinhook3826]

6s and 5s to really complete the look

[@KendalDueck-hi2ho]

You gotta part number on those control arms? I’m needing a set for my sierra

[@speedsoft101]

Gotta get a max trac 7-9 lift on this bad boy

[@Wh0sSpicy]

Love the vids need more videos on chomper

[@jairusbarringer7525]

Good ride height! I didnt know it takes a 3" level to set it level.. ive got 2 silverados and im thinking itd look dang good on my 04 2500

[@emmanueltovar1924]

Nice looking Chevy. I have a 2009 Silverado, I installed the RC 3.5 lifted struts with the new RC upper control arms. When putting back the camber/caster plates should I stick to using the plastic factory adjustment tab hole for the little pins ? Should the specs on cams be different or the same on uppers ?

[@caseybuck1535]

I wanna see you do a bigger lift even just like a maxtrac or something

[@Owen-xo5tl]

Love the vids!! Keep it up!

[@DutyCallz]

needs black wheel liners in the back!

[@EbenezerLeblanc]

Your videos are always full of ideas and creativity. Thank you for the inspiration!⛳️🚖🌶

[@chrisscarpchronicles1497]

I have 275 70r18 on my truck, I put 2" blocks in the back to make my truck sit better I didn't like the squatted look it had with the front raised up with stock rear end height. I have the same blocks you have in the front

[@miguelmendez7993]

You should try out the 7-9 maxtrac lift for this truck they sit dumb high and are very affordable

[@angelojworkman]

Aren’t you supposed to tighten the uppers at ride height, To prevent premature bushing failure? Just curious, I know we have to on Ford.

[@eddierawling6646]

Looks awsome bro

[@W.A.R.R.]

You don’t fully tighten a-arms bolts until you have weight on them…quick way to ruin bushings.

[@currysoccer]

Love the channel bro. Question for you. I live in Auburn, AL and the cops won’t live me alone about tint it’s dark as hell with 0 sides and 3 on the shield. Should I take it off or try to get a medical waiver? I literally get pulled just for that. Tired of that petty ass shit lol.

[@keeganjacobs6687]

What impact do you use?

[@Hayden.Hawkins]

Yes lift it and put it on 26s and 37s

[@michealcavanah8659]

Don’t encourage him

[@pauljohnson7486]

Just how many different wheel and tire scenarios can you set up on your vehicles???

[@shanepenley6964]

Drop shackles coming soon?

[@jaywavy8222]

How much to do mines ? I live in Alabama I love your videos

[@DJB__850]

Is there anyway you could link the uppers you put on?

[@keontaheri3944]

12 seconds ago is crazy

[@lmfscrew]

RIGHT

[@ScottClarke-n4o]

wheel well liners are absolutely needed on the Vmax, that red under the truck is hideous

[@jacksonthompson9106]

what size tire are you running on it?

[@thecountryboyyoutubechanne8276]

I think maybe the v max should get a 6inch lift and some 35s

[@floridaman4072]

What software do you use to edit?

[@tonycampbell9797]

Larry content !!

[@nick-cx8ew]

If you made flat bill hats id totally buy one

[@nathanfreeland7]

good height for the truck and i don’t think you should make it any taller

[@ThisisForTheTV]

No diff drop?

[@tylerbuntin297]

Anyone know what size those wheels and tires are on the vmax? Also what offset the wheels are?

[@cosmix_yt]

where'd you get the upper control arms?

[@franciscosaiz87]

They’re motofab

[@LeonAKALELE]

What exhaust setup do you have on vmax

[@lmfscrew]

Just a muffler/resonator delete 👍🏻

[@CameronLK]

That truck needs a set of wides

[@TylerSmith-rt5fu]

I got a 08 Silverado 1500 I have replaced the brake booster, new master cylinder and bleed all the brakes I still have no brakes I’m pushing my brake pedal all the way down and my brakes aren’t working do you know what it could be?

[@HunterJohnson-v8r]

Where is that kit from? Im really just looking for control arms but

[@franciscosaiz87]

Motofab

[@Jordan-gb4lu]

What kind of rims are those on chomper

[@southernlivinoutfitters6950]

New style high country wheels

[@5.0milo]

Opposite direction of where I think it shoulda gone tbh

[@lmfscrew]

Not feeling low on this one

[@Dads.Garage69]

Still looks good

[@TFBrit]

Product link?

[@schlabachcs]

Pre runner build???

[@lmfscrew]

Gotta get a 2wd truck for that

[@tyredmon2222]

Put the g13’s on ittttt

[@LupeSmasher]

What’s with all the bots 😂

[@chap0448]

does anybody know if i can do this 3 inch puck on a 2018 gmc sierra denali ?

[@franciscosaiz87]

Yes but you’ll have to upgrade the upper control arms as well

[@chap0448]

@@franciscosaiz87 thanks

[@Shallowballow]

Is it me or do 07-13 body style remind anyone of modern day square body ??

[@Rydahood16]

I think just go 20 and 35s on that level

[@alexlsx8187]

AVS sunroof visor !!

[@alexlsx8187]

Auto Ventshade AVS Windflector Classic Sunroof Deflector 77003. That’ll fit perfect on yours, I run them in every 07-13 GM truck/suv w/ sunroof

[@colesharpe767]

Should’ve bought a Milwaukee or LEAST the very least a dewalt🥴 idk the blue rubs me the wrong way

[@bengrant9316]

Please do baby squat style with vmax

[@Dads.Garage69]

Yes

[@TheRealEarlLeeRiser]

Went from a 1” rake to a 1” rake in the wrong direction lol

[@Dads.Garage69]

like it should be

[@gabrielbrookesagri9752]

Wait until he puts drop shackles in the rear, then it will have even more lean

[@Dads.Garage69]

@@gabrielbrookesagri9752 hopefully he does fr

[@maddux1234]

Throw on a 7.5 rc with 5 inch blocks

[@DrRockso.]

Looks more like 36 3/4"

[@eleazarpacheco5600]

Prerunner it

[@calebseng7137]

No lift on this one. Kind it as it is

[@GDKRDOT]

Go lifted higher is better