LeoVince Full Exhaust System Install & Sound Test! [Yamaha R6]

[@tomsjoinery5731]

Why is there no sound (8:46-9:52) and again at (11:29-11:46) also (13:36-14:11)

[@loukas1036]

music copyright

[@tomsjoinery5731]

Loukas oh

[@japethgarcia7161]

That's why. I've been thinking about it for too long I'm afraid.

[@TheKleb]

I'm sure you already have it all figured out but just giving you the option if you're flying to CA for SCMM and want to borrow my Duke 390 while you're here, you're more than welcome to 👍

[@Alien590]

99% of the comments: Bruh take out the DB-Killer ^^

[@TheInja]

For reaaaallllll

[@williamdolezal9184]

But one and do it yourselves

[@R1ACE]

2:40 Motonosity doesn't know his lefts from his rights

[@motonosity]

+Spartan III - MotoKnight Productions 😥😥😥

[@user-hs2hd7wp9g]

Basically a woman

[@Mukenin90]

Thanks for the italian credit on the exhaust. Sincerly a proud italian.

[@r6lunaboxing915]

Moto, thanks a bunch! My Leovince Exhaust didn't come with instructions or anything but using your vid as a guideline when doing my install made everything clean & simple. I hope LeoVince realizes how much you've helped them in sales, I'm sure I'm not the only one who was sold on this exhaust by your R6 build series lol

[@natewheeler2818]

I've been on a Motonosity binge since subscribing 2 days ago. Safe to say I've found my new favourite motovlogger.

[@jermfactor]

Last I checked you always need an oxygen sensor to monitor exhaust on a fuel injected engine even with a custom ECU flash. That's a very important part in the air fuel adjustment

[@RyanMcIntyre]

The ECU has its own A/F ratio it's trying to keep the engine running in, and uses the O2 sensor to maintain that. As I'm sure you understand, the factory has many compromises and concessions to make when determining the ideal A/F ratio to keep. For sake of argument let's say it's around 15.5:1. When I tune a bike I'm shooting for 13:1 up to 12.2:1 but the only way to correct this is by flashing the fuel table in the ECU or in a Power Commander. However, there is no way to change the A/F target in an ECU flash, so even with my wildly richer 12.2:1 fuel table settings, the bike will be trying to correct it back to 15.5:1. Moreover, Yamaha only relies on the O2 sensor up to 6k RPM and static fuel tables after that. It's just simpler to eliminate and disable the O2 sensor in the ECU and run the bike on a custom static table anyway.

[@Mototzigane]

I'm here after watching the MT-09 exhaust video. Gotta say, nothing sounds better than a supersport 600!

[@SkellyWOG]

Nice video and nice exhort but bro why did the audio cut out 3 times in the video?!!!

[@RuciosDubstepMixs]

I havnt seen ur vids a long time but I came back cuz I'm finally buying my own 2018 R6 and i love ur videos! Always man.

[@Quack_attack_]

What color did ya get ? I got a 2018 R6 in matte grey and gaawd damn do it look good

[@RuciosDubstepMixs]

@@Quack_attack_ DUDE ME TOO! I got a 2019 matte grey and its so so sexy. I purchased it with mods on it like a carbon fiber exhaust and fender eliminator and frame sliders and some race handles and it was so worth it

[@JaretCampisi]

God I love bikes. Sounds amazing man. Congrats. Great choice. 👏

[@alexcalzado1248]

Dude that's such a better sound . So much of a difference in sound

[@gaby33510]

sound great! remember that, thats not the final tone the exhaust needs to break in before it reaches the actual tone that it will have. plus the slip on has an insert (DB killer) that leo vince say you can take out if you want to make it lauder!

[@TW0TIRES]

Crap ton has always been my favorite unit of measurement. I love the look of the new exhaust man! Great choice!

[@sarahgrassi9648]

Do a sound test is without the baffle

[@4313max]

Take off the db killer :D

[@kolaAlakija]

4313_max I agree. Would love to hear it then.

[@Sayykoenmoto]

The sound, I love that sound with the leovince exhaust.

[@elvisgonzalez7YT]

Wasn't the DB Killer on?

[@nWsquidasaur]

elvisge7 yes

[@Tom1k9]

Guys, he said he's watched loads of video's and this one was the perfect sound for him. It's already sounding gorgeous, i think taking the db killer out would just make it too offensive. He's got a baby and neighbors haha

[@joshh694]

Woah motonosity is wearing my state's colors

[@brahmaputraa22]

I've been waiting for you buy a new exhaust. Awesome man.

[@david.c888]

Pls no db killer

[@BirdsEyePortugal]

yes remove the db killerrr

[@ridingweeb4801]

seems like a decent choice on a 4cyl bike.

[@sirforryan]

Sounds amazing!! Glad you did the weight diffence. Much love from the uk

[@Dirthead_]

Ride the 450 again

[@timcolvin6933]

Take the DB killer out of the pipe!

[@lyrasimo]

LOL you follow my advice for the pronuntiation , just a little thing :the "e" in LEO has the same sound of the "e" in VINCE, keep in mind , good job have fun with that bike bro.

[@jasongarriock]

Thumbnail looks so good😍😍

[@SSmoothS70]

This makes me want to go get the new R6. Looks great, sounds great, good weight savings too.

[@madmike4128]

Man it sounds great I wouldn't expect anything else from Leo Vince

[@R6_Nitty]

Bruh take the silencer out

[@R6_Nitty]

Furious_Deer_gaming no.. it's not a baffle. The baffle is inside the can itself surrounded by fiberglass packing. Look up race baffles. The cap on the end is there to lower the db levels at tracks with db restrictions

[@Jonathan.Moberg]

R6 GUY It's not called a silencer or a baffle, it's called a db killer. As you said it kills db but it's not called a silencer the silencer is the whole "can" at the end of the exhaust system.

[@spoony0]

R6 GUY well full exhaust systems are often loud enough with the silencer in

[@ahmadantrax1292]

take out the db killer

[@danteestrada-gray5703]

R6 GUY but have a Subaru as your profile pic

[@valter1990]

Best channel on KZbin!

[@joshfromscrapecity3997]

I love his install videos. He actually helps

[@hunter3930]

You have inspired me for years now

[@motomania2902]

She's a real bike now 👌

[@justanotherbronco4750]

I love how you can hear each cylinder fire right after you let off just those little pops right at the end😍🤤

[@Unknownas1337]

Hey Motonosity ! Nice video man!

[@RRRob919]

Sounds great man, even with the baffle! Looks even better as well haha cant complain!

[@jordanroberts8512]

OOh it sounds so good!! That's why I like the way 600's sound over liter bikes

[@silentj3419]

Does that have a DB killer installed?

[@nWsquidasaur]

Silent J yes

[@sslingzy]

Yes

[@scottsog7635]

Hey Brent, sounds like a beast

[@PropDusting]

The audio is missing at 8:50

[@pearsonebfd1]

Sounds 100% Better !

[@metakmoto]

Dope video man. Thanks for the tutorial. Love that bike and the new exhaust looks super clean!

[@motonosity]

No problem, thanks a lot!

[@weth56]

I'm glad I'm not the only one mad about the s killer still being in

[@motonosity]

+weth56 you're legitimately MAD? lol

[@weth56]

Motonosity you'll never know lol

[@chrisw.3000]

You and I are gonna have to link up some day. I gotta check out the R6 and you gotta check my R1. One day I'll make the 2hr ride to ATX

[@donjuan1933]

That was nice and clean. Good job Motto!

[@francescotirabassi7372]

Bellissimi video motonosity..seguo sia te che Chase..fate video davvero divertenti e utili👍

[@Seth-ix1il]

The R6 sounds so amazing

[@Seth-ix1il]

Get rid of the db killer

[@HemivsNinja]

I had a similar set up in my ZX6R concerning the servo I actually left the servo in place and just removing the cables. No flash or servo buddy needed. As far as the bike knows the servo works just fine

[@BATHKEBR]

@Motonosity is representing the badgers oh that awesome

[@johnnysprocket1722]

Finally! I was looking forward to the video yesterday, and then I saw your Insta gram story about how it got late and I was just like "alright, I'm happy. I forgive him" 😂😂 keep up the awesome Videos bro!

[@plasticacaria6427]

YOU KEPT THE DB KILLER

[@29394D97]

If anybody is wondering, the R6 runs perfect without the O2 sensor. It runs richer which levels out the lean spots from the factory.

[@justincrayton324]

But is it okay to run with a O2 sensor plug with a full system exhaust (without a flash) or do I need to pull the sensor back in???

[@MotoMikeYT]

Dude that exhaust sounds amazing! 👍👍 Great choice lol

[@evanhal420]

Damn i couldn't have slept until I finished putting on the exhaust

[@Blottski]

Thank god it's not a Two Brothers. Excellent choice

[@texasrider4D5]

Ahhh! My notifs are so slow!! Lol better late than never i guess.. I'm wondering if it was ever started up with just the headers on.. 🔥😛🔥good stuff brosef! 👌🏍

[@anderzenn_official]

Does it count as notification squad if I was refreshing your uploads waiting for it to show up?

[@motonosity]

+Danish Motovlogger I'll allow it

[@anderzenn_official]

[@scootermichelli9885]

Test drive. So ready to see you drive it!

[@zacoriv3593]

The jazz he got going it a1 no lie

[@andzejjo9404]

1% comments- awesome sound 99% comments- take the db killer out

[@motonosity]

+Andzej jo 😅😅

[@joshuaberry3168]

Your r6 is the best mate carry on mate love your bike

[@talltexan4710]

You should look into your throttle and throttle bodies being limited during full throttle. That might get you an extra 10-15 hp!

[@sgarner44]

Great walk through! Really made putting a full exhaust on less intimidating. Time to place an order and get to work.

[@escopes2123]

THAT THING SOUNDS AMAZING!!! congrats

[@juliansaiz5714]

This is gonna be my first starter bike, great idea? I think yes

[@romandashkevich9780]

I got a 2007 r6s as my first streetbike. Keep in mind I rode 14 other motorcycles before (fourwheelers, dirtbikes, 2 street bikes 250 and a 600)

[@mattm1841]

The bike looks and sounds amazing!

[@shaun8309]

that sounds freaking sweet man!

[@asifshaikh-zd9zl]

One of the best exhaust heared ever

[@maxm2637]

Nice Wisconsin shirt haha! Bike sounds great!

[@daredevilike378]

Looks great and sounds allot better!

[@thony_777]

Oooooo my god I just wanna rob the bike from you, loving that new exhaust

[@arbikash669]

Bro u r really working very hard...

[@97Drake]

You have to take the R6 to SCMM! That'll be turning heads especially with the new exhaust!!

[@Quiz6556]

Are you going to dyno tune the r6 with the new system? Also hows your little one doing?

[@karlfritz47]

I love your vids man..id love to be a bike mechanic..its somthing id love and could get so deep into..no Harleys or buells ..or triumph allowed. . . if only i was ten years younger

[@nicklavigne3052]

That Wisconsin shirt looks fire🔥🔥🔥

[@AdamSVT]

nice work.. sounds sooooo much better

[@motonosity]

+dafobra thanks man

[@sportsterrider37]

You should of kept the o2 even with a ECU flash. It only does small adjustments but does so for things like temp changes. Always install everything loosely before you tighten.

[@mickeymang6]

Very nice man. But you might want to look into the PAIR system delete plates. Installs on the valve cover.

[@mickeymang6]

www.gravesport.com/products/graves-motorsports-smog-block-off-plates-for-yamaha-sportbikes.html

[@motonosity]

+Mike M yep will be doing fill AIS removal soon!

[@unused4606]

Im in for a treat

[@danieldeutschen]

A slip on isn't the same as an end can. A slip on is an aftermarket exhaust which just replaces the end can, so it slips onto the original headers. If you look at the complete exhaust system, you got your end silencer, headers and, depending on the bike, a mid silencer

[@motonosity]

+Daniel Deutschen and yet everyone knows what I'm talking about.

[@danieldeutschen]

That's true. Might just be that I'm german ;)

[@beneagles007]

That thing looks so good. Soooooooo GOOD!!!!!!

[@chrisp.5272]

I love the R6. Gotta get one.

[@Becherrr]

I honestly need An R6

[@uNexAPB]

Who told you that stock exhausts are restrictive? They are quite an I credible peice of engineering. Rules and regulations are so tights that's its amazing how much performance they can squeeze out of 600hp. P.s. Please get a remap.

[@1Yosuave]

Motonosity!! You gotta do a daily 100 with that new exhaust😁 after it gets tuned of coarse.

[@big181818T]

That looks better than I throught it would and it sounds awesome

[@Di2zYy.]

loving he bike bro good shit hope the family life style going good ..

[@ahickin]

Great video bro 👊 Just subbed amazing channel 😊

[@motonosity]

+The Spiderman Thanks a lot dude!

[@Mr.Squibbler]

Hey, it's a long shot for a response, but did you reuse the OEM gaskets on the headers or just slip the bushings in? I got the same exhaust, didn't use the gaskets, and i think there is a small leak.

[@rickymemeti1826]

Sounds DOPE as F dude 👍🏻😎

[@motonosity]

Thanks man!

[@huntertobias2166]

Sometimes a rebel is what we need... KEEP THE DB-KILLER IN!

[@MotorcycleThrottle]

R6 Looks clean and sounds mean with that new pipe. Btw. You should remove those orange reflectors on the front forks. It looks odd to me.

[@welchennamendennbite]

So, the missing O2 sensor and exhaust valve in combination with completely different exhaust gas pressures is no problem for the engine? Or is there damage to be expected when used like this for a longer time without remapping the ECU?

[@erickum6946]

Hi, went thru your merchandise, wondering if there is shipment to Singapore just for the key tag.

[@XxDiogoxX100]

Sounds great 💪🏼

[@kevintoekimin]

Should you also install a power commander when you install a full exhaust?

[@xcoverx2525]

Monosity . You mentioned flashing ECU. Thats where i really do not have much knowledge on . Where do you send your ECU flash ? Thanks again