Motorhome Security pt1 - How To Fit A Van Door Deadlock, Full Installation Of Vehicle Dead lock

[@flasheart3817]

Nice little touch with rust proofer (I've watched a few people miss that out). Proper old school. Nice vid. 👍

[@brendarn450]

Thank you sir, for all your precise detailed instruction and education in every video! Your patience in explaining each step and your rational provides the opportunity to learn and accomplish such tasks. I sit and take notes on your videos, order the materials, then watch the video a few more times to gain further patience and confidence in myself as I dtill holes into my metal home! Much appreciated and needed knowledge! Be well sir!

[@TheWrinklyNomads]

Hi Brenda, Thank you so much for your kind words. I hope your projects go well Steve

[@Jim_Kay.]

Very informative. I'm in the process of picking up a full set for my Relay. This has giving me the confidence to DIY it. Cheers!

[@1davejo]

Such a clever tip on the swivel chair bike lock- so imaginative/ingenious 👌🏼

[@TheWrinklyNomads]

Thanks Dave, Every little deterrent helps eh....!

[@onlylexus]

God bless you, I have exactly the same Fiat Ducato motorhome. I Have been trying for weeks to see how I can fit a dead lock to both cab doors, driver and passenger. Anyway I have put it off because I don't really know which lock to get for my older type Fiat van 2005. Then I stumble by accident on you with the same van and showing me what company I can get the locks. This is a treasure find for me and I want to thank you so very much. Will subscribe with pleasure! Regards from a Yorkshireman living in Scotland.

[@TheWrinklyNomads]

Hi Paul, Thanks for watching and glad it has helped you 👍

[@galapetr7786]

To je peklo, existují snad elegantní vnitřní zámky

[@TheWrinklyNomads]

Děkuji, fungují opravdu dobře. 👍

[@martinwhitley9893]

That’s a very good job your a very brave man doing this to your van well done

[@TheWrinklyNomads]

Hi Martin Thank you, it was a fairly straightforward job actually. Just a case of measure three times, cut once....!!!

[@TheWrinklyNomads]

Hi Martin Thank you, it was a fairly straightforward job actually. Just a case of measure three times, cut once....!!!

[@danieloneill3398]

That’s a great video you did & good detail but as a carpenter I noticed the keeper was not cut out for the deadbolt and the door moved slightly which gaves a bit of slick for a bar to lift the deadbolt out of the keeper.

[@Procamdvd]

Good video with clear directions. Well done.

[@TheWrinklyNomads]

Thank you, Glad it was helpful..👍

[@williamphillipson548]

Thanks Steve for guiding me to Part 1👍..very ambitious

[@jameslahiffebaker2412]

Really love this... Thank you for providing some great information!

[@martamaticseng5186]

Thank you! I might fit them myself with your precise instructions, save myself some money 😊

[@TheWrinklyNomads]

Hi, Yes, it's a pretty straightforward job really. ATB, Steve

[@racingblonde]

Excellent video, very clear and in understandable layman terms,.

[@TheWrinklyNomads]

Thank you for your kind comments..

[@datheat2854]

Good luck with ur venture

[@TheWrinklyNomads]

Thank you, We are touring Europe now. Think there's about 7 videos up of our road trip..... ATB, Steve

[@johnnicholas978]

absolutly briliant,,,informative and practical,,,

[@TheWrinklyNomads]

Thank you for your kind comments John.

[@Chriswoodworker]

Quality job my friend. Well done.

[@nomansvan827]

Thank you, enjoyed seeing the installed product.

[@grazynakaledek6228]

Hey Steve...Nice Professional Job! Thanks for sharing. I have a Simple, inexpensive Safety Idea! Using a pair of 1/2" Pipe Hangers 2" long & an 8" length of 1/2" Pipe with End Caps. Screw or Rivet the 1/2" L shape Pipe Hanger to each door. Fasten one End Cap on a 8" length of 1/2" Steel Pipe & pass it through the Pipe Hangers & hand screw the other End Cap to secure the Doors. incapacitate

[@rtempesta1]

Good job sir, safe and clean. Greetings from Italy.

[@TheWrinklyNomads]

Hi Bob, Thank you for your kind comments. I hope things are starting to get back to normal now in you beautiful country. ATB, Steve

[@motorhomebettyboopstravels]

Brilliant Thanks Wrinkly, Super Job.👍

[@AC-SlaUkr]

So that will stop them smashing the window and climbing in?

[@anyjimblogs]

Thanks for the video mate. Be very useful for my own van.

[@TheWrinklyNomads]

Thanks for watching and Glad it helped 👍🏼

[@Paul-ly9ed]

Excellent work as always

[@TheWrinklyNomads]

Thank you so much 😀

[@rogerjames3312]

Job well done and a step by step guide easy to follow , thank you .

[@Crusty_Camper]

Hello from a fellow Vintage Van Owner. In my case, the van is classic, I am vintage. That was useful, thank you. I guess what we are trying to do is get the thief to try another van that does not have the extra locks fitted, and it looks very effective for that job. My existing locks were forced at some time, by someone hammering a screwdriver into the keyhole and twisting the whole thing, so when I got it, you could open it with your fingernail. I've fitted internal security to overcome that, but I do like the look and effectiveness of the deadbolt lock. Thanks again, Pete

[@TheWrinklyNomads]

Hi Crusty.... Yep, gotta protect them old van eh.. Also got another security video covering various other measures I have taken to try and stop the van getting nicked here: kzbin.info/www/bejne/f4OafqutjdVmos0 ATB, Steve

[@rayc1503]

Blue or red chalk applied to the lock catch helps to determine where the striker plate should be placed. 👍 great tutorial pal 😜.

[@MrJasdog107]

Nice tidy job.

[@TheWrinklyNomads]

Thank you! Cheers!

[@kevinhughes9801]

Excellent video thanks. Look forward to next one on security

[@TheWrinklyNomads]

Thanks Kevin, No: 2 should be ready in a couple of weeks. Steve

[@PreparednessVeteran]

Yes, the angled sides are a real pain for lining up, but still work a treat, especially when in and sleeping, a great peace of mind! I have Milenco door lock levers and one similar to your dead bolt, but for the side sliding door and a huge bolt for the back doors Looks like you did a great job, nice n neat...

[@TheWrinklyNomads]

Yes, your right. You definitely need more than the standard locks.. I think these sort of door deadlocks are the first thing any van owner should fit. Even more for sliding doors eh..! ATB, Steve

[@christoffer1973]

Great idea. On those side Windows you can get security film/foil. It's clear but hold the glass and still whit broken glass they can't get in and glass splinter are stuck to the film.

[@markivinson6708]

Nice job

[@markivinson6708]

Did you do any more security add ons

[@joshpopeishere]

Very good video thank you

[@andrewdarby8827]

Great job

[@TheWrinklyNomads]

Thanks Andrew 👍🏼

[@66Trips]

Great video, looks quite straightforward although I might still pay someone to do it for me .

[@jbaker4522]

Nice work 👍

[@TheWrinklyNomads]

Thank you.... 👍

[@deenunya7735]

Another way for the Stryker Plate..Bob Sum Black Paint as yours is White, Throw the Bolt over and it makes the Full Impression where the Bolt lands onto the B Post

[@TheWrinklyNomads]

Hi Dee, Yes, I played around with that idea as well, but the lock didn't quite throw over enough to make a decent mark. Just needed a half mm to work!!!! The lock makers suggest using plasticine on the panel but I didn't have any...!!!! Thank you for adding that as a comment though. It will help others. ATB, Steve

[@brunog6050]

gee, what have you just said...?? it sounds chinese. could you translate this sentence to us, mere earthlings...

[@vanosfer]

Amazing.... Really good job. Thanks for sharing it! :)

[@thespaceinbetween7085]

great job

[@cmaxjoe]

well done,good video.

[@TheWrinklyNomads]

Thank you very much 👍🏼

[@jeremybowen3111]

Thank you 😊

[@tahirhodaj9549]

Well done Mate

[@DroneHDTV]

your side window is the point of entry to get to your door lock. thanks for your video

[@pablohippy]

Love your tutorial - very well explained - fantastic :-)

[@iankiff4243]

Brilliant Steve my girlfriend is in the process of converting a transit into a camper this will really help. atb and stay safe 👍

[@TheWrinklyNomads]

Hi Ian, Definitely fit them to a Transit, 100%.... They are renowned for having very bad door security. Same goes for the sliding door. These type of deadlocks are not cheap but absolutely essential I think. ATB, Steve

[@elliotlee233]

Just a quick tip for anyone fitting one of these locks themselves, when you're trying to position the keep in the door frame, either pinch one of your girlfriends/wife's lipsticks, use some double sided sticky tape to attach a piece of erazer to the top and bottom of the bolt face, then smear a generous portion on the door frame side of the rubber, close the door and try to turn the key forcing the rubber up against the door frame, then turn the key back open the door, and you should have the correct position of the bolt marked on the frame with lipstick, you can them position the keep correctly.

[@TheWrinklyNomads]

Good ideas there Elliot, thank you 👍

[@Earthquakezz]

Hi, I really want to install one of those or similar on my Dodge/Mercerize Benz Sprinter 2006 2500. Do you know where I could find one of those and Who! I could have install it for me in the US please? Thank you very much.

[@elliotlee233]

@@Earthquakezz To be honest I have no idea where you could get them in the USA, but I have seen them for sale on both Ebay and Amazon so I'm assuming they'll be available on them in the USA, as for someone to fit them for you in the USA? I'm afraid you'll have to find a local mechanic or auto locksmith. Good luck :)

[@anelectrician]

Thank you sir ! 👍🏿

[@michaelp998]

Use magnets on the panel whilst drilling to attract all the iron filings 👍

[@TheWrinklyNomads]

Very good idea Michael, thanks for the tip ATB, Steve

[@khiggins8733]

13:16 Get your missus lipstick and paint the end of the bolt. Close the door and throw the bolt and it will make the position of the hole you need.

[@caravanlifenz]

I clicked on the video mainly for your cool channel name. The Wrinkly Nomads 🤣

[@TheWrinklyNomads]

haha, thank you. We think it's quite appropriate for us two..! We are getting ready for our first big roadtrip around Europe in a few weeks, so hoping to document the places we visit, much like your travels. take care, Steve & Margot

[@frankwhite2]

Top man 👍

[@maxloux42]

Merci. M@x(France)

[@KR-je1if]

Great video thanks , made it look easier enough to do

[@TheWrinklyNomads]

Thanks Kieth..👍

[@BloodyShambles1997]

The thief will just smash the windows and climb in lad.

[@TheWrinklyNomads]

You have missed the whole point of the video!

[@raytandy8142]

I’m having a job lining up the Barrel lock with the lock any tips

[@landog59]

All nice, but how do you lock it from the inside?

[@TheWrinklyNomads]

Hi, This type of vehicle deadlock is designed to be unlocked/locked from the outside only. It's additional security when leaving the van parked up and another layer that thieves would have to get past. ATB, Steve

[@davidkelly831]

Gréât vidéo

[@islanddreaming8591]

Won't the thieves will just simply smash the window if they want to get in?

[@TheWrinklyNomads]

Yes of course they could…. But this is just of the many ‘layers’ of prevention I’ve got. Mainly to stop theft of motorhome. ATB, Steve

[@mave1068]

Your good 👍

[@rachidben4833]

Hello for france, i just want to say if the robber break your glass to enter in your van. What will you do ??

[@ambroos9436]

What about the side doors with a camper van? Any idea? 🤔

[@TheWrinklyNomads]

Hi Ambroos, There is a company that supply and fit these deadlocks for all van doors. Including sliding doors. Do a Google search, I think you'll find them on there.. 👍

[@DayBowBow]

How do you open the deadlock from the inside though?

[@kroozer5215]

Its normal for the barrel to be on the slant, my partner van has the same locks on and they are really on the slant, but they are awesome locks

[@UhtredRagnarsson1949]

A great deterrent against thieves. Why aren't these locks factory fitted to all vehicles?

[@drummerdem50]

cheers Bud..

[@TheWrinklyNomads]

Your welcome Drummer....

[@jkyoft78]

What is printed on the lock above the deadbolt? I wonder if Locks 4 Van is the manufacturer or if they get the locks and re-package and sell them.

[@littleowltelevision1418]

Could a 4 inch metal grinding wheel be used to cut out long door lock ? would this make a straighter smoother cut ? what do you think ?

[@TheWrinklyNomads]

Yes, that's definitely possible and faster I would think. Don't slip though..!!! ATB, Steve

[@mollydion8311]

Great job! I don't suppose you'd be in the U.S. & could install this on my van. 🤗

[@TheWrinklyNomads]

Thank you. But I’m in the UK Molly...

[@mollydion8311]

@@TheWrinklyNomads 😊 Ah yes across the pond! 🚣‍♂️ Teehee You still do a great job!

[@RaminM12]

grat job and i like it............

[@y0rkiebar]

Well done for tackling that yourself! Shame the deadlock came with a bog-standard euro cylinder which can be snapped easily. My house was broken into by a lock-snapper, there are better cylinders available if you wanted to swap it out.

[@marcoknip5392]

Nice one! only thing is, don't really get why people bother to secure driver and passenger doors. Thieves usually break the glass for access.

[@davidtodd907]

i just use a ratchet type tie down strap fastened between the two cab doors. it takes less that 2 mins to fit it, costs less than £5, is very effective and and the doors cant be opened unless they get into the cab area via the hab door to remove the strap whilst the alarm is going off.

[@TheWrinklyNomads]

Hi David, Yes, I know, there's many different methods that people use. My thinking was, even if someone smashed a side window, they still can't open the doors with these deadlocks. I have another security video on the other methods I use as well here: kzbin.info/www/bejne/f4OafqutjdVmos0 ATB, Steve

[@brunog6050]

Hey Steve, greetings from a fellow van-dweller (also Ducato), thank you for this video, been looking for the solution for a while. So what about the other two doors - sliding door and rear doors? could you make a video how you secured those? And my other question is: how can you lock the car from the inside? Meaning: you are deep sleeping at night, and you want to make sure no one comes into your home to "check it out". I cant lock the deadlock from the inside, can i... cheers

[@BatCaveOz]

Roll down the window from the inside... reach outside and lock the deadlock.

[@IverKnackerov]

Lovely neat job ... debating this for my van but not convinced yet. That door could be levered open without too much effort so you're going to need a new door skin as well having being burgled. And for our van we'd have to fit locks to both doors, back doors and sliding doors to complete the job. Alternatively, they just ruin a window instead. Can't help feeling a very visual, loud, dedicated campervan alarm and immobiliser would be a better bet? Would most thieves avoid a van with sirens, horns, lights flashing ?

[@nigelkerr3102]

I think this video is intended to be part of a series so there may be one on alarms .....there is a professional lock fitting company (Sussex Team something) on You Tube which showed a PIR alarm system fitted. A plunger switch is fitted to the inside top corner of a sliding side door (in this instance) so as soon as anyone tries to peel or bend the top of the door the alarm goes off...

[@brunog6050]

@@nigelkerr3102 we must remember though, that if you have to spend as much on the alarm/security system than you spent on kitting the van... something is wrong. I got two quotes from two "professional business", both over £800 just to put locks on the four doors. The alarm is an extra £500... Let's get real here, shall we.

[@igualnimp]

Thanks for listing all the tools, but may I ask, where did you buy these beautiful deadlocks please?

[@TheWrinklyNomads]

Hi, I bought from a company online. But can't who..! If you search 'van deadlock kits' there's a lot out there.

[@sara78130]

Thanks where I buy

[@TheWrinklyNomads]

Hi Alan, There are various places to buy, but I got mine from Amazon: amzn.to/3cXrPYX Hope this helps, Steve

[@adamedge2019]

Don’t do it by eye all you do is use set squat draw a line that’s central to the Natel across the from off the lock put the lock in get a ruler and set it against lock where you measured up and that will give you perfect position.. and always masking tape the inside and outside where your going to work don’t want to scratch your vechile . And personally we use black sealant for company I work for to fit the other side to a little dot with sealant at top and bottom off lock mechanism and tape the other side shut the door try to lock it then open door u will have two dots from the sealant that gives u perfect position to do the other side

[@TheWrinklyNomads]

Really good ideas there Adam, Thank you.. 👍 ATB, Steve

[@grazynakaledek6228]

Install a Good Security System than can be Monitored from your Cell. Install a Van Vault secured to the Van Floor to keep your Valuables. Install a Hidden Kill Switch so the Van can't be Driven away. Cheers from Toronto, Canada.

[@brandyramos9372]

Well done, can you do mine😂

[@1flashlite1]

These locks don't seem to be available in the USA.

[@TheWrinklyNomads]

Hi Rich I’m not too sure where they are manufactured? Would think you must have something similar in the states though?? Good luck Steve

[@grumpy55]

So I’ve just spent £50000 on a motor home,I wouldn’t dare attempt that,but the more security you can put on the better, good vid though.

[@TatidoGuta]

👏🏻👍🏻👏🏻

[@pkgoldopalhunting]

they can still break the window if they want to seal it or any thing in side just saying

[@TheWrinklyNomads]

Yes your perfectly correct there. In my next video I have a few more security measures to show including window security. ATB, Steve

[@sebbe5004]

To be honest, thief can penetrate every lock the thing is to push him to do as much noise as possible to open it;) that what makes our chance higher to protect cars/ goods

[@jkyoft78]

Did you worry about metal shavings from drilling and cutting falling inside the door that may create rust down the road?

[@Trang-xq9fn]

I installed a locking deadbolt on the inside. Thieves can still use a tool to stick into the key hole and turn the deadbolt to open. Anything with a visible key hole even if lockable can be opened with a tool by most thieves.

[@TheWrinklyNomads]

Would have to be a very, very good and experienced thief to have the skills to do that.... It would be easier and quicker for a thief to smash the glass a climb in!!! Essentially any extra security will present a 'slowing down' problem for a thief. ATB, Steve

[@Trang-xq9fn]

@@TheWrinklyNomads I recently had a break in. Thief used a tool to damage and unlock all the keyholes including the deadbolt on the inside. He broke a small window to reach in. He certainly could not have crawled through a tiny window opening. Also, he needed to damage my inside deadbolt in order to get in and out of my van. Most thieves are experienced these days. Just ask an insurance claims department to see how often keyholes are damaged to get inside.

[@michaelhoare5291]

Hell of a job, credit to you. I'll have a go at most things but I can see me having to source a new door if I tried this. I must say I favour visable physical security devices such as wheel clamps, pedal clamps, and even a good old steering wheel clamp. Having had my moho broken into via the quater light, at least they couldn't drive off. As we all know; all we can do is to make it difficult for these scum bags so they move on to some other unsuspecting soul.

[@steveclark..]

That deadbolt needs to go into the actual pillar of the van's frame, two pop rivets holding on just that plate aren't going to resist much prising I'm afraid.

[@petercucumber4380]

Looks hard

[@TheWrinklyNomads]

Hi Peter, I think most average DIY'ers should be able to do this job. I'm nothing special and it all went pretty smoothly with just the basic tools. Take your time, measure 3 times, cut once..!!!! ATB, Steve

[@petercucumber4380]

@@TheWrinklyNomads thanks will try 😊

[@ezioauditore3128]

2 years on and they are still cheaper on Vanlocker. £100 for both.

[@darrenjowett8032]

Can’t the thief just break the window and crawl in?

[@nannystatenonsense7419]

wow, fair play to you. But the things you have to do to protect your own belongings from bottom feeding pond life! 🤬

[@johnwolf1475]

dont forget the keys!!!

[@TheWrinklyNomads]

haha... the head security officer (wife) would never allow me to do that...🙄

[@victoronet3944]

definitely enjoyed watching. what a shame when they put a solid crowbar and force it open in less than 20 seconds. bastards!!

[@TheWrinklyNomads]

Hi Victor, Yes theres always a way in if the effort warrants it. I think half the battle is visual deterrents and this, plus the fact that it is an actual lock that requires effort from a crowbar carrying thief to remove, would persuade them to go rob the less protected van next door.... Half the time my wife is in the van anyway, that's more of a deterrent then an drugged up hyena.......😂 ATB, Steve

[@brunog6050]

hey man, got the sarcasm in your comment all right, but hey, what is missing is to also give us a link or idea to a better solution, eh? It's one thing to point out the weakness of a system, but why don't we add a better idea then, so we can all learn something. Just a thought.

[@andrewarthurmatthews6685]

Not homeless if you are still inside it

[@TheWrinklyNomads]

Well, technically yes, I suppose so Andrew......👍

[@OldSchoolDisco_channel]

Unuseful, it can be opened in 30 seconds with lockpick.

[@TheWrinklyNomads]

Still worth installing though. 99.999999% of thieves would move onto the next less protected motorhome.

[@OldSchoolDisco_channel]

@@TheWrinklyNomads i don't think, in real is 50 percent.

[@wesm6422]

Strikerplate is a joke, no security there.