Yamaha Virago XV750 Cafe Racer Custom Timelapse Build Ep.2

[@RoadAheadWithAJ]

as someone who has tried stop motion, the engine dismantling and assembly must have taken a lot of effort!!! Kudos to you for such a great job!!!

[@motow19]

Yes for sure lots of work but final result can be great!! Thank you very much!!!

[@Steeeve_Rpg]

Ditto! I watched that segment thinking, “dang. That took a lot of work”

[@tphvictims5101]

I’m going on 70 years old. I had 2 bikes a long time ago. Both were fun. Traffic around here would turn me into a statistic. Bikes are a great way to travel if you are properly outfitted. Your bike here is very interesting.

[@DonFather]

I like how the engine opens & fixes itself. That is so satisfying to watch. lol

[@wolfgangschmid5688]

I learned once: Never use the inner bearing ring to press the bearing into housing.

[@jimsound7888]

Hello from Nottingham, UK. This is the best build so far

[@motow19]

Thanks!!

[@billmcgarry3300]

Beautiful work on your creation! I bought my XV920RH (chain drive) new in 1981 and I’m still enjoying it all these years later… it has “evolved” mechanically but still wears it’s Hannigan SuperSport fairing and it’s twin cylinder heart still pulls hard!

[@surefiremushroomsmicrogreens]

Great job guys!! If you put your bearings in the freezer over night they will slip in like butter without having to use any heat 😉 builder to builder ❤️🙏 same with those neck races!

[@LordHolley]

Funny I was thinking the same thing. Why would you heat up the race, making it expand and harder to put in?

[@givara13]

Guys you have no idea how happy i am watching the determination & the great attention to detail, the passion & hard work, resulting this amazing beautiful bike, keep it up guys, much love from middle east❤️

[@YakAllGUY]

Wow!! Looking good guys!!! Congratulations on the 50k subs!

[@Oratazana]

FREAKING AWESOME THAT ENGINE time laps

[@AG-ki8pm]

Good job, the bike looks great.

[@toddcolinfew]

Beautiful bike. Awesome editing.

[@motow19]

Thank you!!!

[@dudemx509]

R1 front end, nicely done!!!

[@plan-bmotos]

Awesome build! Powder coated parts looks so good!

[@mape.poyhtari]

Some real quality building! Can’t wait the final result

[@motow19]

Yes we are very anxious as well. Thanks!!

[@maqueifranz3736]

Q projeto top tenho vontade de montar uma virago 250 aqui no Brasil nesse estilo

[@cristophercarlosdiazperez2680]

wow esta increíble la pintura electrostática

[@67lnr80]

Can you guys make a video on how you made that seat? It came out really nice!

[@jarrodwebster8166]

I would love some info on how well those mikuni carbs are working over stock

[@closingtheloop2593]

Looking forward to this update. Im about to do the same build.

[@AngeloGabriel-my7gk]

Que casal foda! Sonho em ter uma xv750 customizada e vocês me inspiram muito com seus vídeos! Parabéns!!!

[@jonmechanic9676]

Hola, que nivel de trabajo!! Yo estoi haciendo una xv cafe racer, vosotros habeis sido mi inspiracion! Seguir asi, un saludo desde Euskadi!!

[@motow19]

Gracias!! Saludos desde Dallas!!

[@alfonsocienfuegos258]

Felicidades maestros que trabajo tan exelente se nota su profesionalismo

[@JohnGarcia-oh2le]

Press in bearings using the outer race.

[@tvdinner325]

When installing bearings, it's easier to place them in the freezer, than heat the wheel.

[@konexoantonio8079]

Buenos dias. Trabajo estupendo y de gean calidad. Voy a empezar a transformar una Yamaha Virago 1100 del 91 y necesito saber la horquilla que has montado de que moto es. Supongo que sera horquilla, discos y tijas superiores de una misma moto. Gracias.

[@tonyagudo4515]

Looking great! How is this bike now?

[@josealejandroespinosarodri1831]

Que excelente trabajo!! Que medida de neumáticos han puesto?!

[@motow19]

Gracias!!! Delantero 130/80-17 y trasero 130/90-16 los 2 son Metzler cruisetec.

[@dreadnought2029]

❤️❤️❤️❤️❤️❤️❤️ Brilliant. Love your work!!

[@sergiom9191]

Tell us more about yourself and your shop. Great job.

[@ashley-tm1uk]

you've gone to great lengths to video this the way that you have...amazing..probably took as much time to shoot and edit as it did to build....hats off to you!...btw...very cool bike...can't wait to see finished!

[@motow19]

@ashley Thank you!! We really appreciate your comment!! Should be ready soon.

[@peterc938]

Awesome as always

[@abhijithanair7031]

Great job . A funtastic video 💥💥❤️. Love from india

[@motow19]

Thank you!

[@claudiovaz4930]

Olá para cuando um video de todas as actualizacões efectuadas neste video, banco carbs ... Excelente trabalho parabens.

[@alinnegru4622]

awesome project!!!

[@pasuggungun]

Wow beautiful~ What is name gas tank? Which bike..

[@norhashimahakim1265]

Nice & profesional video Good work for the bike

[@carlosbassan2713]

Parabéns ! a motoca ficou lindona 🏍

[@StraightLineCycles]

Dont install bearings by the middle, use the outer ring.

[@johnvellis5148]

Beautiful very nice job my lady❤️🌹

[@motow19]

thank you for watching!

[@noelcerera1378]

Wow nice moto...

[@gleidsonfernandes7881]

Oba... Já tava com sdds.

[@motow19]

Obrigado por acompanhar os videos e projetos!

[@gleidsonfernandes7881]

@@motow19 adoro todos. São únicos e lindos. Parabéns.

[@LuisFelipeSilva-ql9se]

como eu sonho com um projeto desses, mas até a moto é dificil (quase impossivel) de encontrar no brasil.

[@TheBabim11]

Wow best video so far I’m not even done watching it and I’m leaving the comment already!! Great job guys!! How long did it take to shoot the engine??

[@motow19]

Thank you!! I don’t know exactly how long it took but we did it in parts through so many days shooting the disassemble of engine. 👍

[@norhashimahakim1265]

Install the wheel bearing should use the hydrolic pump.

[@zacharybrooks4169]

Does are there even any normal viragos left?

[@Robson3r]

It's very rare for a woman to like a motorcycle, even more to ride a motorcycle with her because this one is different.

[@reubenudayan7825]

Can you share the specs and seat plans, love the design very similar to the moose design one

[@motow19]

Hi seat pan and bracket and padding was done by Andrew Nicholls in the UK look for him on FB. He makes great and affordable parts tell him Motow from Dallas sent you there. Thanks!!

[@motow19]

@reuben udayan

[@motow19]

facebook.com/andrew.nicholls.52

[@reubenudayan7825]

@@motow19 thank you very much, I really appreciate it

[@justinlee2387]

Do you have to keep the original main wiring harness for the cafe racer build?

[@motow19]

No we will make a complete new wiring harness to Munit blue it simplifies everything. Thanks!!

[@Butalidave]

Love your accent

[@shawnjohnson928]

Where did you get that tank? Also what metal did you make your seat from? Great video man keep up the great work.

[@mateusfdf]

Pena que esse modelo não veio pro Brasil

[@motow19]

É uma pena mesmo!Obrigado por assistir.

[@arnoldziukas4856]

very nice projects, I am also making such a Yamaha virago, maybe you can send a link for the rear shock absorber? thank you😊

[@Depressed.gamer.]

From which bike does the rear shock came from??

[@nigelbreddy8033]

Did you make the seat yourself, as I’m building a very similar xv920 and looking for this exact seat?

[@motow19]

@Nigel Breddy yes I custom made the seat and I do have it available on Ebay contact me there if you have any questions : www.ebay.com/itm/185350450914?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=r6FTzjtwTWi&sssrc=2349624&ssuid=&var=693130666226&widget_ver=artemis&media=COPY

[@nigelbreddy8033]

Awesome, thanks

[@freemusicpandex7725]

que hermosa moto, como puedo hacer para obtener una igual soy de _Peru...................

[@sahabatbonsai8864]

Awesome 😎

[@gbuzz1245]

did you anodise or powder coat those fork legs?

[@kawings]

I love your rebuilding a bike video a lot. Over in your country does this private built bikes be able to get legal license to operate on the road?

[@ThrottleWorks86]

Well done!

[@imethclay8038]

Awesomeness

[@karno1762]

Can you give some tips for a first time builder?

[@motow19]

@KARNO17 I would say start with a motorcycle that you really like but also has parts available if not make a list of parts to start searching and ordering ahead of time. Make sure if you need to label anything during the disassembling do it so because by the time you might be putting it back together usually for me is at least months down the road and sometimes doing more than one project at once it gets confusing sometimes . The rest is just enjoying the build as much as you can and don’t worry how good it will look because you will be a lot better on your second bike and so on. Good luck!! Thanks for Watching!!!

[@karno1762]

@@motow19 thank you so much

[@AlbRider03]

Is there any episode 3??

[@leone.19xx]

Good evening, I will write from Japan. I'm not good at English, but please forgive me. There is something I want you to tell me. I know that this vehicle is XV750 Billago. What kind of car is the front stem and fork? How many years do you use it? Did you do any more processing? Did you do any processing on the rear swing arm? And what did Riass use? Please tell me as much as you can. Thank you very much.

[@somaodeunier7586]

Magnificent 😍

[@alfonsocienfuegos258]

Saludos

[@BWD81]

Episodio 3 ??

[@motow19]

Very soon

[@fabianbanzhaf8565]

Awesome build, but had to watch the video on double speed

[@mohamedanfaz270]

Super baby

[@spencerphillips1733]

What wheels and tires are you using? Specs?

[@Edwinrantung]

Waw amazing 👍👍

[@MikeMitchum]

Great series, you two. What fuel tank are you using?

[@motow19]

@Mike Mitchum Thank you!! We are using a 78-79 Kawasaki KZ650sr tank and cap

[@bradjean4486]

Question do you sell theses bikes once they are finished and if so what is the cost and where are yall located

[@motow19]

@Brad Jean we are in Dallas TX well usually when they are our projects we will sell some of them usually we don’t even have time to enjoy them and they are gone haha 😂 but this one currently is from one of our customer’s but it will run around $14k-$18k with donor motorcycle depending what mods you would like. We do have an extra xv750 all matching numbers ready to be build pretty soon after this one is done.Thank you!!!

[@jkllenado6356]

Hi guys Keep up the good work just found ur channel today amazing work ✌♥️ just wondering does the R6 front triple tree fit perfectly or some mods needed?

[@crtnhfan7860]

Which front fork?

[@josecid9986]

What year are yamaha 750.?

[@СергейТкачук-б3м]

How did you paint engine ?

[@s3nku.]

I want to buy this bike but question is how? .

[@motow19]

@Virat Roy we are building this one for a customer but we have 3 more viragos in line ready to be custom built let us know Thanks!!

[@duclife1059]

Hi, where did you fabricate the seat bracket and the seat?

[@motow19]

Hi seat pan and bracket and padding was done by Andrew Nicholls in the UK look for him on FB. He makes great and affordable parts tell him Motow from Dallas sent you there. Thanks!!

[@motow19]

@Duclife

[@duclife1059]

@@motow19 hi for some reason I cannot find him. Is under a different name? Like the shop? Is he on IG?

[@motow19]

Ok try this link facebook.com/andrew.nicholls.52

[@wilhelmsmit7828]

rc Plane in background..crop duster

[@micramvandrew4109]

Hey love your videos. just wondering what is the size and make of the rear and front tires? They look good together

[@premo8564]

you guys are cool as shit. awesome work

[@erwinmoreno23]

Subbed

[@mladentomic8356]

How much cost like this bike??

[@motow19]

All done with parts and labor $15k

[@deanheld1361]

Hi what tank is this ?

[@motow19]

@dean held 78-79 Kawasaki KZ650sr Thanks!!

[@deanheld1361]

@@motow19 Nice, it looks very good so far !

[@Rmztymskn]

Super👏👏👏👍👍👍

[@Kkzonair]

Perfect 🥳😘

[@georgeperez3695]

hey y'all, whatever happened with this build?

[@motow19]

It’s getting there some more details and we will have the final video out soon among some new projects too. Thanks!!

[@georgeperez3695]

@@motow19 hey, yeah, thank you all! I love y'all's content, great stuff.

[@bejoljm2233]

Keren vidionya. tante jozz

[@DNW29]

Can you make cafe racer by yamaha fz

[@motow19]

Nice!! Yes FZ could be a nice project!!

[@Ayadw7]

What’s the tire size on it?

[@Wishaker]

best

[@LORENZOCCH]

W video

[@26mai69]

top cooles Video

[@franzschiestl7015]

Hammer braves Mädchen...

[@ahkosingle8829]

😍😍😍

[@LORENZOCCH]

W bike

[@АлександрЁлышев-у2ф]

where can I get such a seat?

[@motow19]

We custom make them. We can make you one at your request. Let us know. Thanks!!

[@АлександрЁлышев-у2ф]

@@motow19 how much is? And is it possible to ship to Kazakhstan?

[@motow19]

Around $600

[@mohammedmidlaj4623]

Waiting for new video

[@motow19]

Very soon!! Thank you!!

[@tedmarakas2626]

The Yomama was an ugly bike before. However, I must say.....it is looking pretty damn good now.